DROPS / 139 / 5

Akropolis by DROPS Design

Knitted DROPS bolero with crochet edge in ”BabyAlpaca Silk”. Size: S - XXXL.

DROPS design: Pattern no BS-016
Yarn group A
----------------------------------------------------------
Size: S/M - L/XL - XXL/XXXL

Materials: DROPS BABYALPACA SILK from Garnstudio
200-250-300 g colour no 1306, powder

DROPS STRAIGHT NEEDLES SIZE 3.5 mm - or size needed to get 23 sts x 30 rows in stocking st = 10 x 10 cm.
DROPS CROCHET HOOK SIZE 3.5 mm – or size needed to get 6 tr-groups = width 10 cm.

(Continue to pattern...)

Tags:

pattern type: boleros, pattern/technique: fan pattern, lace, shape: sideways,
Yarn type
Deals from
DROPS BABYALPACA SILK UNI COLOUR (50g)
DROPS Super Sale / 35% OFF!
3.75 GBP
2.45 GBP
n/a

Tips & Help

All our patterns include tutorial videos that can help you finish your project in no time!

See them here!

You can also find step by step tutorials for the most common knitting and crochet techniques in the DROPS Lessons!

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
TEMPORARY CAST ON EDGE:
Crochet a row with ch - unravel this row afterwards to get the cast on sts on needle again. Cut the thread - do not fasten. Use a new thread to knit up sts in ch-row.

GARTER ST (back and forth on needle):
K all rows.

PATTERN:
See diagrams M.1 to M.4B. The diagrams show the pattern from RS.

DECREASE TIP:
Dec 1 st in each side as follows: 1 edge st in garter st, work the next 2 sts tog, work until 3 sts remain on needle, work the next 2 sts tog, 1 edge st in garter st. Make sure that pattern in M.1 is correct when dec, adjust when there are fewer sts, i.e. sometimes there is no room to work pattern at beg and end of row. Make sure that pattern in the rest of diagram is correctly above each other as before.

TR-GROUPS:
1 tr-group = 2 tr, 2 ch, 2 tr in same ch-loop. Replace 1st tr on round with 3 ch, then work 1 tr-group in every ch-loop, finish with 1 sl st in 3rd ch from beg of round, work sl st until next ch-loop to beg next round.
----------------------------------------------------------

BOLERO:
Worked back and forth on needle. Worked sideways, first from left shoulder to the bottom of right sleeve, and then from cast on edge to bottom of left sleeve.

BACK PIECE:
Crochet TEMPORARY CAST ON EDGE - Read explanation above - with BabyAlpaca Silk on hook size 3.5 mm as follows: Loosely crochet 80-96-101 ch, then use a new thread and needle size 3.5 mm to knit up 1 st in every ch on ch-row = 80-96-101 sts (1st row = RS). Work next row from WS as follows: 2 edge sts in garter st, P until 2 sts remain and finish with 2 edge sts in garter st. REMEMBER THE KNITTING TENSION!
SIZE S/M and XXL/XXXL:
= 80-101 sts. On next row from RS work as follows: 2 edge sts in garter st, * diagram M.4A, diagram M.4B *, repeat from *-* a total of 3-4 times, then diagram M.4A 1 more time, finish with 2 edge sts in garter st. Continue in pattern with 2 sts in garter st in each side until piece measure approx 32-39 cm - finish 1 full repeat of diagram M.4A - AT THE SAME TIME inc 0-1 st on last row = 80-102 sts.
SIZE L/XL:
= 96 sts. On next row from RS work as follows: 2 edge sts in garter st, * diagram M.4B, diagram M.4A *, repeat from *-* a total of 4 times, then diagram M.4B 1 more time, finish with 2 edge sts in garter st. Continue in pattern with 2 sts in garter st in each side until piece measure approx 35 cm, finish with 1 full repeat of M.4A.

RIGHT SLEEVE:
= 80-96-102 sts. Then work diagram M.2 1 time vertically with 2 sts in garter st in each side - AT THE SAME TIME on last row in diagram M.2 adjust no of sts to 84-94-104. Then work diagram M.3 (= 8-9-10 repetitions of diagram M.3 with 2 sts in garter st in each side), and then diagram M.2 1 time vertically with 2 sts in garter st in each side. NOTE: On last row in the second repetition of diagram M.2 adjust no of sts to 82-98-106 (= 10-12-13 repetitions of diagram M.1 with 1 st in garter st in each side). Place a marker each side of work (sleeve seam ends here).
Then work diagram M.1 with 1 st in garter st in each side. When diagram M.1 has been worked 8 rows vertically, dec on next row (= 9th row in diagram M.1) 1 st inside 1 edge st in each side - Read DECREASE TIP above. Repeat dec on every 6th-3rd-3rd row a total of 8-16-16 times = 66-66-74 sts (= 8-8-9 repetitions of diagram M.1 with 1 st in garter st in each side). Work M.1 3 times vertically and then work rows 1-8 in M.1 1 more time (= 56 rows M.1 in total). Then work 2 rows in stocking st before loosely casting off all sts (piece measures approx. 61-64-68 cm from cast on edge).

LEFT SLEEVE:
Worked back and forth on needle size 3.5 mm. Worked from left shoulder to the bottom of left sleeve. Unravel the ch-row on the temporary cast on edge and slip cast on sts back on needle = 80-96-101 sts. Then work diagram M.2, beg on 3rd row (instead of 1st row) in pattern - AT THE SAME TIME inc 0-0-1 st on same row = 80-96-102 sts. Then work as on right sleeve.

ASSEMBLY:
Fold the piece double so that the longest sides of the bolero (markers on each sleeve) are place towards each other. Sew the sleeve seams inside 1 edge st as follows: Beg at the bottom of sleeve, sew towards mid front until markers (or desired length), repeat on the other sleeve.

CROCHET EDGE:
Crochet from RS on hook size 3.5 mm with BabyAlpaca Silk as follows:
ROUND 1: Beg mid under one sleeve, crochet along the opening between the sleeves (approx. 15 dc on 5 cm, or approx. 10 dc on every repetition of diagram M.4A, no of sts must be divisible by 5), finish round with 1 sl st in 1st dc. NOTE: Make sure to work enough dc to avoid a tight edge.
ROUND 2: 1 ch, in 1st dc work 3 ch, 1 tr, 2 ch and 2 tr, * skip the next 4 dc, in next dc work 2 tr, 2 ch and 2 tr *, repeat from *-* the entire round, finish with 1 sl st in 3rd ch from beg of round.
ROUND 3: Read TR-GROUPS above! In every ch-loop on round work 1 tr-group.
Repeat 3RD ROUND until edge measures approx. 6 cm. On next round work in every ch-loop as follows: 3 tr, 2 ch, 3 tr. Repeat this round until edge measures approx. 10-11-12 cm, cut and fasten the thread.

CROCHET EDGE - SLEEVE:
Crochet an edge from RS at the bottom of sleeve on hook size 3.5 mm with BabyAlpaca Silk as follows:
ROUND 1: Beg mid under sleeve, work approx. 15 dc on 5 cm (no of sts must be divisible by 5), finish round with 1 sl st in 1st dc. NOTE: Make sure to work enough dc to avoid a tight edge.
Then work ROUNDS 2 and 3 as on the bolero edge, repeat 3RD ROUND for approx. 6-7-8 cm, cut and fasten the thread. Repeat on the edge of the other sleeve.

----------------------------------------------------------
TOP – see design: 139-6
----------------------------------------------------------

Diagram

= K from RS, P from WS
= P from RS, K from WS
= K 2 tog
= from RS: slip 1 st as if to K, K 1, psso. From WS: P 2 tog
= 1 YO between 2 sts
= slip 1 st as if to K, K 2 tog, psso
= knitting direction


Related patterns

Do you need some help? Here's some tutorial videos that can help you!

For further pattern help, please contact the store where you bought the yarn. Having bought DROPS yarn, you are guaranteed to receive qualified help from a store specializing in the DROPS patterns.

All patterns are carefully reviewed, but we must make reservation for possible mistakes. All patterns are translated from Norwegian and you can always check the original pattern for measurements and calculations.

If you think you have found an error in the pattern, please post your remark or question in our Comments section. Go to original pattern for design DROPS 139-5.