DROPS Baby Merino
DROPS Baby Merino
100% Wool
from 3.50 £ /50g
Get the yarn to make this pattern from 21.00£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS Baby 21-1
DROPS design: Pattern no BM-038-by
Yarn group A
----------------------------------------------------------
JACKET:
Size: 1/3 - 6/9 - 12/18 months (2 - 3/4) years
Size in cm: 50/56- 62/68- 74/80 (86/92-98/104)

Materials: DROPS BABY MERINO from Garnstudio
150-200-200 (250-250)g colour no 03, light yellow
50 g for all sizes in colour no 04, yellow

DROPS CIRCULAR NEEDLE SIZE 3 mm (60 cm) - or size needed to get 24 sts x 32 rows in stocking st = 10 x 10 cm.
DROPS STRAIGHT NEEDLES SIZE 2.5 mm - for edge in garter st
DROPS CROCHET HOOK size 3 mm - for crochet border
DROPS WOOD BUTTONS LIGHT, NO 503: 4 pieces
--------------------------------------------------

SLIPPERS:
Size: 1/3 - 6/9 - 12/18 months (2) years
To fit foot length: 10-11-12 (14) cm

Materials: DROPS BABY MERINO from Garnstudio
50 g for all sizes in colour no 04, yellow
50 g for all sizes in colour no 03, light yellow

DROPS STRAIGHT NEEDLES SIZE 2.5 mm - or size needed to get 26 sts x 52 rows in garter st and 26 x 34 rows in stocking st = 10 x 10 cm.
DROPS CROCHET HOOK SIZE 2 mm - for crochet border

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Baby Merino
DROPS Baby Merino
100% Wool
from 3.50 £ /50g
Get the yarn to make this pattern from 21.00£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (back and forth on needle): K all rows.

SHORT ROWS:
* Work 2 rows in garter st over the 24-24-26 (28-28) band sts, work 2 rows in garter st only over the outermost 12-12-13 (14-14) sts. NOTE: When turning mid piece, slip first st. Tighten thread and continue as before. This is done to avoid holes in the transitions *.

BUTTON HOLES:
The jacket is double-breasted. Cast off for 4 button holes on right band.
1 BUTTON HOLE = K tog fourth and fifth st from edge and make 1 YO. On same row also K tog fourth and fifth LAST st on band, make 1 YO.
Cast off for 2 button holes when piece measures:
SIZE 1/3 MONTHS: 14 and 19 cm
SIZE 6/9 MONTHS: 16 and 21 cm
SIZE 12/18 MONTHS: 18 and 24 cm
SIZE 2 YEARS: 20 and 27 cm
SIZE 3/4 YEARS: 22 and 30 cm

----------------------------------------------------------
JACKET:
Worked back and forth on circular needle.
Beg on front piece, cast on sts for sleeve and work up to the shoulder. Knit the other front piece, place both front pieces tog and work down the back piece.

LEFT FRONT PIECE:
Read all of the following section before continuing!
Cast on 43-47-51 (56-59) sts (incl 1 edge st in the side and 24-24-26 (28-28) band sts towards mid front) on needle size 2.5 mm with Baby Merino. Work 6 rows in GARTER ST - see explanation above. Switch to circular needle size 3 mm and work in stocking st but continue to work the 24-24-26 (28-28) band sts towards mid front in Garter st. When piece measures 4 cm, work SHORT ROWS - see explanation above (1st row = from WS). Repeat from *-* 1 time every 4 cm until piece measures 19-21-24 (27-30) cm, then repeat from *-* 1 time every other cm until finished measurements.
AT THE SAME TIME when piece measures 16-17-20 (23-25) cm, cast on new sts at the end of every row from WS (towards the side of sleeve): 6 sts 2-2-3 (3-3) times, 8 sts 1-1-1 (2-3) times and 21-22-22 (25-26) sts 1 time = 84-89-99 (115-127) sts for shoulder/sleeve.
Work inc sts in stocking st. When all sts have been cast on, continue in stocking st and Garter st as before while AT THE SAME TIME also working the outermost 10 sts on sleeve in garter st.
When piece measures 27-29-33 (37-40) cm, insert a marker = mid on top of shoulder. Now slip the 24-24-26 (28-28) band sts towards mid front on a stitch holder. Then cast on 2 new sts at the end of row from RS (towards neck), repeat inc on next row towards neck = 64-69-77 (91-103) sts on needle.
Work 1 row from WS.
Put all sts on a stitch holder.

RIGHT FRONT PIECE:
Cast on and work as left front piece but reversed. In addition cast off for BUTTON HOLES on band - see explanation above. NOTE! Slip sts on a stitch holder after the last row with inc (i.e. last row = from WS).

BACK PIECE:
Work left front piece on to circular needle, cast on 16-16-18 (20-20) new sts (= back of neck) and work right front piece on to circular needle = 144-154-172 (202-226) sts.
NOW MEASURE PIECE FROM MARKERS ON SHOULDERS.
Continue in stocking st and Garter st at the end on each sleeve back and forth on needle.
When piece measures 8½-9½-10 (10-11) cm, beg to cast off sleeve sts. Cast off at beg of every row in each side as follows: 21-22-22 (25-26) sts 1 time, 8 sts 1-1-1 (2-3) times and 6 sts 2-2-3 (3-3) times = 62-70-76 (84-90) sts on needle. Continue in stocking st with 1 edge st in each side.
When piece measures approx. 26-28-32 (36-39) cm – fold the piece double at the markers on shoulders and make sure that the back piece is as long as front piece down to rows in garter st, switch to needle size 2.5 mm and work 6 rows in garter st, then cast off.

ASSEMBLY:
Sew the sleeve and side seams inside 1 edge st. Sew on buttons.

HOOD:
Knit up approx. 102-106-112 (118-122) sts (incl sts from stitch holders at the front – NOTE: If more/fewer sts have been knitted up, dec/inc evenly on 1st row. Continue in garter st over all sts while AT THE SAME TIME working short rows in each side every other cm – SEE EXPLANATION ABOVE. Cast off when hood measures approx. 21-23-25 (27-28) cm. Sew hood neatly tog at the top - sew in front loop of outermost st to avoid a chunky seam.

CROCHET BORDER:
Crochet a border around the entire jacket.
Beg at the bottom on right front piece and crochet with 2 threads yellow Baby Merino and hook size 3 mm as follows:
Work 1 dc, * 3 ch, 1 tr in 1st ch, skip approx. ½ cm, 1 dc in next st *, repeat from *-*.
Crochet the same way around the openings on sleeves.
-----------------------------------------------------------------

SLIPPER:
The slipper is worked back and forth from mid back. Cast on 48-52-56 (56) sts on needle size 2.5 mm with 2 threads yellow Baby Merino. Remove 1 thread and work rib (= K 2/P 2) for 5-6-6 (7) cm – adjust so that next row is worked from WS. P 1 row from WS while at the same time dec 14-14-18 (14) sts evenly = 34-38-38 (42) sts. On next row work eyelet holes as follows from RS: K 1, *K 2 tog, 1 YO *, repeat from *-* and finish with K 1. P 1 row from WS. Now slip the outermost 12-13-13 (15) sts in each side on a stitch holder. Work 4 - 4½ - 5½ (6½) cm in stocking st over the middle 10-12-12 (12) sts. Slip sts from stitch holders back on needle and knit up 10-11-13 (16) sts on each side of mid piece = 54-60-64 (74) sts on needle. K every row over all sts for 3-4-5 (5) cm while at the same time after 1½ - 2 - 2½ (3) cm, dec on every other row as follows until completed: Dec 1 st at the beg and the end of row and K 2 tog on each side of the 2 mid sts. Cast off and sew tog mid under foot and continue up mid back in front loop of outermost sts to avoid a chunky seam.
Knit another slipper the same way.

TIES:
Cut 3 threads light yellow of approx. 1 metres, twine them tightly tog, fold them double and they will twine again, tie a knot in each end. Thread tie up and down through the eyelet holes on slipper.

CROCHET BORDER:
Crochet a border at the top of slipper on hook size 2 mm with light yellow as follows: 1 dc in first st, * 3 ch, 1 tr in 1st ch, skip approx. ½ cm, 1 dc in next st *, repeat from *-* and finish with 1 sl st in dc from beg of round.

This pattern has been corrected.

Updated online: 12.03.2012
JACKET:
CROCHET BORDER:
Crochet a border around the entire jacket.
Beg at the bottom on right front piece and crochet with 2 threads yellow Baby Merino and hook size 3 mm as follows:
Work 1 dc, * 3 ch, 1 tr in 1st ch, skip approx. ½ cm, 1 dc in next st *, repeat from *-*.
Crochet the same way around the openings on sleeves.

SLIPPER:
CROCHET BORDER:
Crochet a border at the top of slipper on hook size 2 mm with light yellow as follows: 1 dc in first st, * 3 ch, 1 tr in 1st ch, skip approx. ½ cm, 1 dc in next st *, repeat from *-* and finish with 1 sl st in dc from beg of round.
Updated online: 03.07.2014
New yarn amount in jacket, size: 6/9 months, 2 and 3/4 years.
Materials: DROPS BABY MERINO from Garnstudio
150-200-200 (250-250) g colour no 03, light yellow

Diagram

diagram measurements

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Baby 21-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (274)

country flag Martina wrote:

Kann das sein, dass die Anleitung zu den Hausschuhen irgendwie nicht zu dem Bild der Hausschuhe passt? In der Anleitung steht glatt gestrickt, auf dem Bild sieht es an den Füsschen eher nach Krausrippe aus?

25.01.2013 - 18:45

DROPS Design answered:

Liebe Martina, der obere Teil des Schuhs wird glatt rechts gestrickt. Wenn Sie das zweite Foto anklicken können Sie es deutlich sehen.

26.01.2013 - 23:25

country flag Maria, Themel wrote:

Meine zweite Frage bezieht sich auch auf diese Maschen.Wenn man sie auf einen Hilfsfaden zieht befindet sich ja der Faden noch am Anfang der Reihe.Wie bekomme ich den dann über die 26 Blendenmaschen um nach diesen weiterstricken zu können? Ich hoffe ich konnte es irgendwie verständlich formulieren ;)

19.01.2013 - 21:09

DROPS Design answered:

Sie legen die M still, nachdem Sie sie gestrickt haben (um den Faden an der richtigen Stelle zu haben).

20.01.2013 - 19:12

country flag Maria, Themel wrote:

Hallo zusammen, Ich habe zwei Fragen. 1.was passiert mit den Blendenmaschen nachdem das vorderteil fertig ist.In der Anleitung steht das die nach 33 cm auf einen Hilfsfaden geschoben werden und danach werden diese Maschen aber nie wieder erwähnt.

19.01.2013 - 21:09

DROPS Design answered:

Liebe Frau Themel, lesen Sie bitte unter "Kapuze", dort werden die stillgelegten Maschen wieder aktiviert.

20.01.2013 - 19:10

country flag Cindy Swoveland wrote:

I am about to start the hood. I don't understand the instructions for the short rows. A diagram of what the hood is supposed to look like before seaming would be a great help. Thanks.

11.01.2013 - 20:25

DROPS Design answered:

Dear Mrs Swoveland, you continue on the hood the short rows you worked before on front bands each side. Happy knitting !

16.01.2013 - 15:06

country flag SaraMy wrote:

Hej! Jag har en fråga ang. Förkortade varv, som jag förstår minskar man på framkantsmadkorna, men sen ska man även sticka tolv maskor och sen minska, är det på slätstickningen då?

06.01.2013 - 09:08

DROPS Design answered:

Hej, Nej du minskar inte på framkantsmaskorna, du stickar bara förkortade varv enligt beskrivningen i den sidan. Se även frågor och svar nedan i Bloggen. Lycka till!

17.01.2013 - 07:50

country flag Kim wrote:

I have just started knitting this fab jacket but need advice from short rows. am i supposed to knit all stitches or just garter stitch? if so when do I knit up the stocking stitch stitches?? please help. thanks?

30.12.2012 - 17:27

DROPS Design answered:

Dear Kim, the short rows are worked in garter sts in the sts for the front borders each side, and the remaining sts for the jacket should be worked as before in stocking st. Happy knitting!

02.01.2013 - 11:35

country flag Sarah wrote:

Außerdem habe ich noch eine 2. Frage: Frage. Das linke bzw. rechte Vorderteil wird aus welcher Ansicht gestrickt? Aus der Draufsicht oder aus der Ansicht wenn man es selbst tragen würde?

19.12.2012 - 16:19

DROPS Design answered:

Hallo Sarah, das re Vorderteil ist bei Tragen rechts, das linke links.

20.12.2012 - 08:42

country flag Sarah wrote:

Also ich muss jetzt trotzdem nochmal nachfragen wegen den verkürzten Reihen. In der Anleitung steht 1 krausrippe über 24 blendenmaschen und 1 krausrippe über die äußersten 12 blendenmaschen. d.h. 4 cm blende+glatt dann 1 krausrippe 24 blendenmaschen, 1 krausrippe 12 blenden maschen (4 reihen glatt werden NICHT gestrickt) und dann wieder "normal" weiterstricken?

19.12.2012 - 16:19

DROPS Design answered:

Hallo Sarah, ja genau wie Sie es beschreiben, aber es wird alle 4 cm und dann alle 2 cm wdh.

20.12.2012 - 08:41

country flag Carla wrote:

Betreft de capuchon: verkorte toeren op dezelfde manier als in de bies? De gehele capuchon breien in ribbelsteek?

12.12.2012 - 17:50

DROPS Design answered:

Ja, doorgaan met de verkorte toeren en de ribbelsteken over alle st

13.12.2012 - 16:38

country flag Carla wrote:

Het betreft hier een vraag over het breien van de verkorte toeren. Als je dit midden in de bies doet, blijf je dit altijd zien. Moet dit zo, of aan het einde van de bies tussen ribbel en trico in?

05.12.2012 - 19:29

DROPS Design answered:

Zie mijn antwoord hieronder.

06.12.2012 - 17:09