DROPS Nepal
DROPS Nepal
65% Wool, 35% Alpaca
from 4.60 CAD /50g
Get the yarn to make this pattern from 55.20CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 132-2
DROPS design: Pattern no NE-061
Yarn group C
--------------------------------------------------------
Size: S/M - L/XL - XXL/XXXL

Materials: DROPS NEPAL from Garnstudio
color no 612m, medium brown
600-700-800 g (= 12-14-16 skeins)

DROPS CROCHET HOOK size 5 mm / H/8 – or size needed to get 14 tr x 5½ rows with tr vertically = 10 x 10 cm / 4'' x 4''.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Nepal
DROPS Nepal
65% Wool, 35% Alpaca
from 4.60 CAD /50g
Get the yarn to make this pattern from 55.20CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
CROCHET TIP:
Replace first tr on every round/row with ch 4.

DECREASE TIP 1 (applies to the body):
Dec as follows: Work tr until 3 tr remain, * in the first of these work 1 dc, in the next 1 hdc and in the last 1 sc, turn with ch 1, skip sc, work 1 sl st in hdc and 1 sl st in dc, then 1 sc in first tr, 1 hdc in next tr and 1 dc in next tr, work tr until 3 tr remain at end of row *, repeat from *-* until a total of 6-8-12 rows have been worked.

DECREASE TIP 2 (applies to sleeve cap):
Dec at beg of row by working sl st over the no of tr to be dec. Dec at end of row by working until same no of sts to be dec remains, turn piece.
--------------------------------------------------------
--------------------------------------------------------

BODY:
Worked in the round in a circle from mid back.
Ch 8 on hook size 5 mm / H/8 with Nepal and form a ring with 1 sl st in first ch.
ROUND 1:
Work 12 sc in ch-ring, finish with 1 sl st in first sc.
ROUND 2:
ch 5 (= 1 dc + 2 ch), * 1 dc in next sc, ch 2 *, repeat from *-* the entire round and finish with 1 sl st in 3rd ch from beg of round = 12 dc with 2 ch between each.
ROUND 3:
1 ch, continue to crochet as follows in every ch-space the entire round: 1 sc + ch 1 + 1 sc + ch 1, finish round with 1 sl st in first ch = 24 sc with 1 ch between each.
ROUND 4:
1 sl st in first sc, 1 sl st in first ch, ch 5, 1 dtr in same ch, * ch 7, then work 4 dtr tog as follows: Work 2 dtr in same ch as last dtr but wait with last YO and pull through on both dtr, skip 1 sc + 1 ch + 1 sc, work 1 dtr in next ch but wait with last YO and pull through, then work last dtr in same ch and pull last YO through all 5 sts on hook *, repeat from *-* a total of 11 times, ch 7, work 2 dtr tog in same ch (but wait with last YO and pull through on both), work 1 sl st in 5th ch from beg of round and pull thread through all 3 sts on hook.
ROUND 5:
1 sl st in first ch-space, ch 4 (= 1 tr), 7 tr in same ch-space, then work 8 tr in every ch-space, finish with 1 sl st in 4th ch from beg of round = a total of 96 tr.
ROUND 6:
ch 5 (= 1 dc + 2 ch), * skip 1 tr, 1 dc in next tr, ch 2 *, repeat from *-* the entire round and finish with 1 sl st in 3rd ch from beg of round = 48 ch-spaces.
ROUND 7 – READ CROCHET TIP:
Work 1 tr in every dc and work 1 and 2 tr alternately in every ch-space the entire round = 120 tr.
ROUND 8:
Work 1 tr in every tr but work 2 tr in every 10th tr = 132 tr.
ROUND 9:
ch 5 (= 1 dc + 2 ch), * skip 1 tr, 1 dc in next tr, ch 2 *, repeat from *-* the entire round and finish with 1 sl st in 3rd ch from beg of round = 66 ch-spaces.
ROUND 10:
Work 1 tr in every dc and work 1 and 2 tr alternately in every ch-space the entire round = 165 tr.
ROUND 11:
Work 1 tr in every tr but work 2 tr in every 15th tr = 176 tr.
ROUND 12:
Work 1 tr in every tr but work 2 tr in every 16th tr = 187 tr.
Piece measures approx. 20 cm / 8'' from center and outwards.

SIZE S/M:
ROUND 13:
ch 1, then work 1 sc in each of the first 45 tr (= up towards neck), ch 30 loosely, skip the next 27 tr (= armhole), then work 1 sc in each of the next 88 tr (= down towards back), ch 30 loosely, skip the next 27 tr (= armhole) and fasten with 1 sl st in first sc on round.
ROUND 14:
Work 1 tr in every sc - but inc 2 tr evenly over the first 45 sc (= 47 tr), then work 30 tr in ch-row over armhole, work 1 tr in every sc – but inc 3 tr evenly over the bottom 88 sc (= 91 tr), and work 30 tr in ch-row over armhole = 198 tr.
ROUND 15 to 19:
Continue with tr – while at the same time inc 6 tr evenly on every round. After 19th round there are 228 tr on the round and piece measures approx. 33 cm / 13'' from center and outwards.
Continue working only over 79 tr in each side – i.e. do not work over 35 tr at top by neck or 35 tr at bottom of back.
Continue with explanation under FRONT PIECE.

SIZE L/XL:
ROUND 13:
Work 1 tr in every tr but work 2 tr in every 17th tr = 198 tr.
ROUND 14:
ch 1, then work 1 sc in each of the first 50 tr (= up towards neck), ch 32 loosely, skip the next 29 tr (= armhole), then work 1 sc in each of the next 90 tr (= down towards back), ch 32 loosely, skip the next 29 tr (= armhole) and fasten with 1 sl st in first sc on round.
ROUND 15:
Work 1 tr in every sc - but inc 3 tr evenly over the first 50 sc (= 53 tr), then work 32 tr in ch-row over armhole, work 1 tr in every sc – but inc 3 tr evenly over the bottom 90 sc (= 93 tr), and work 32 tr in ch-row over armhole = 210 tr.
ROUND 16 to 20:
Continue with tr – while at the same time inc 6 tr evenly on every round. After 20th round there are 240 tr on the round and piece measures approx. 35 cm / 13 3/4'' from center and outwards.
Continue working only over 81 tr in each side – i.e. do not work over 39 tr at top by neck or 39 tr at bottom of back.
Continue with explanation under FRONT PIECE.

SIZE XXL and XXXL:
ROUND 13:
Work 1 tr in every tr but work 2 tr in every 17th tr = 198 tr.
ROUND 14:
Work 1 tr in every tr but work 2 tr in every 18th tr = 209 tr.
ROUND 15:
ch 1, then work 1 sc in each of the first 54 tr (= up towards neck), ch 36 loosely, skip the next 32 tr (= armhole), then work 1 sc in each of the next 91 tr (= down towards back), ch 36 loosely, skip the next 32 tr (= armhole) and fasten with 1 sl st in first sc on round.
ROUND 16:
Work 1 tr in every sc - but inc 2 tr evenly over the first 54 sc (= 56 tr), then work 36 tr in ch-row over armhole, work 1 tr in every sc – but inc 3 tr evenly over the bottom 91 sc (= 94 tr), and work 36 tr in ch-row over armhole = 222 tr.
ROUND 17 to 22:
Continue with tr – while at the same time inc 6 tr evenly on every round. After 22nd round there are 258 tr on the round and piece measures approx. 37 cm / 14½'' from center and outwards.
Continue working only over 89 tr in each side – i.e. do not work over 40 tr at top by neck or 40 tr at bottom of back.
Continue with explanation under FRONT PIECE.


LEFT FRONT PIECE - ALL SIZES:
= 79-81-89 tr. Insert a marker after 23-24-27 sts in from each side (= 33-33-35 sts between markers). Then work tr back and forth over these sts while at the same time inc 1 st at every marker on every row (i.e. inc 2 sts on row, inc alternately before and after marker) and dec 3 sts at beg and end of every row in each side – SEE DECREASE TIP 1 until a total of 6-8-12 rows back and forth have been worked.

RIGHT FRONT PIECE:
Work same way as on left piece over 79-81-89 tr in right side.

SLEEVE (worked back and forth):
Ch 46-48-53 loosely (includes 4 ch to turn with) on hook size 5 mm / H/8 with Nepal.
ROW 1: 1 tr in 5th ch from hook, 1 tr in each of the next 2-4-2 ch, * skip ch 1, 1 tr in each of the next 6 ch *, repeat from *-* until 4 ch remain, skip 1 ch and work 1 tr in each of the last 3 ch = 37-39-43 tr.
ROW 2: 1 tr in every tr – READ CROCHET TIP!
ROW 3: ch 6 (= 1 tr + 2 ch), skip 1 tr, 1 tr in next tr, * ch 2, skip 1 tr, 1 tr in next tr *, repeat from *-* the entire row = 18-19-21 ch-spaces.
ROW 4: Work 1 tr in every tr and 1 tr in every ch-space = 37-39-43 tr.
Repeat row 2-4 a total of 3 times. Piece measures approx. 18 cm / 7''. Then work tr on all rows until finished measurements, while at the same time inc as follows:
SIZE S/M:
* Inc 1 tr in one side by working 2 tr in next to last tr. On next row inc 1 tr in the other side the same way. Inc 1 more time the same way in each side, then work 1 row without inc *, repeat from *-* a total of 3 times = 12 inc = 49 tr.
SIZE L/XL + XXL/XXXL:
* Inc 1 tr in one side by working 2 tr in next to last tr. On next row inc 1 tr in the other side the same way *, repeat from *-* a total of 8 times = 16 inc = 55-59 tr.
ALL SIZES:
Continue to work until piece measures 49 cm / 19 1/4'' in all sizes.
Now dec on every row in each side for sleeve cap – SEE DECREASE TIP 2: 3 tr 1 time, 2 tr 3 times and 3 tr 1 time = 25-31-35 tr remain at the top. Fasten off.

ASSEMBLY:
Sew sleeve seams tog edge to edge to avoid a chunky seam.
Work 1 round around the entire body and at bottom of sleeves as follows: * ch 5, 1 dc in first ch, skip 1 st, fasten with 1 sc in next st *, repeat from *-* the entire round and finish with 1 sl st in first ch.
Sew in the sleeves.

If desired, close the jacket with a pin or sew on a button on to left front piece (try the jacket on to see where button should be) and button it in crochet edge.




Diagram

diagram measurements
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Wild Flower

goldenlion, United Kingdom

Fiore selvatico

Barbara, Italy

Wild Flower

Lena, Sweden

Soleil beige

Dominique, Belgium

Rundgehäkelt: Wildblume

Ingrid, Germany

Post a comment to pattern DROPS 132-2

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (433)

country flag Kelly Leonard wrote:

I am on rounds 17 to 22, Do I continue around the whole circle? I am confused on the sentence "Continue working only over 89 tr on each side - ie do not work over 40 tr at top by neck or 40 tr at bottom back.

22.03.2024 - 22:57

DROPS Design answered:

Dear Kelly, no, from that point you work back and forth. Happy Crafting!

24.03.2024 - 14:35

country flag Laura wrote:

I haven't begun the pattern yet because I want to make sure my gauge is correct. Too much frogging in my past. The gauge instructions are a little different than most and I'm hoping you can explain them: "14 tr x 5½ rows with tr vertically". I understand the 14 trebles (US terminology). Where I get stuck is the 5.5 rows with trebles vertically. I've used both 5mm and 6mm hooks to sample my yarn and neither seems to be what this calls for. Help?

22.01.2024 - 05:20

DROPS Design answered:

Hi Laura, This means that if you work 51/2 rows of trs the swatch should measure 10 cm in height. Happy crocheting!

22.01.2024 - 06:45

country flag Laetitia Philibert wrote:

Bonjour, je ne comprends pas comment faire des devants droit et gauche. Ou et comment placer les marqueurs ? Merci de m'aider car je suis complètement bloquée.

23.10.2023 - 19:45

DROPS Design answered:

Bonjour Mme Philibert, pliez votre cercle en double en posant les emmanchures l'une contre l'autre pour qu'elles soient bien en vis à vis, placez 1 marqueur en haut (côté col) au milieu et un autre en bas, également au milieu; dépliez maintenant votre cercle et comptez le nombre de double-brides du haut et du bas correspondant à votre taille et placez des marqueurs pour bien délimiter ces mailles, vous devez avoir 79-81-89 double-brides pour chacun des devants, 35- 39-40double-brides en haut, côté encolure et 35-39-40 en bas du cercle. Bon crochet!

24.10.2023 - 09:01

country flag Natasha Wheelock wrote:

Trying to work the sides. Question 1:Do I start by doing a dtr (so it won’t be a perfectly smooth curve)and work dtr until 3dtr are remaining and follow the decrease tip 1 or do I start by doing the second half of the decrease tip 1 (so the to is a smooth curve) Question 2: why do the increases need to be before and after the marker.? Would it work if I just increased in the v shape formed by the two dtrs made in the increase on the previous row?

19.09.2023 - 22:00

DROPS Design answered:

Dear Mrs Wheelock, start front piece with 1 dtr on first row, then decrease as explained at the end of the row + at the beg of next row. Increasing at the markers will make the front pieces nicely rounded just as on the picture. Happy crocheting!

20.09.2023 - 07:46

country flag Una wrote:

I have the circle finished ie row 19 complete. I cannot understand where to begin my 79 stitches for the front sides. I am making size s/m. I see where sleeves will be but need to know where to go next please, and where to begin the fronts.

09.09.2023 - 14:53

DROPS Design answered:

Dear Una, you need to skip 35dtr at the top of the circle (the neck) and 35 dtr at the bottom of the piece. The remaining 79 stitches on each side will be used for the front pieces. So you count outwards from the center at the top and center at the bottom of the circle to have 1 central stitch and 17 stitches on each side of the central stitch and skip these stitches. Happy crocheting!

10.09.2023 - 20:23

country flag Marion Eitel wrote:

Ich komme mit der 4.Runde nicht zurecht es heißt 5 LM dann 1 Dreifach Stäbchen um dieselbe LM. Bitte welche LM ist da gemeint? Um die 5???? Dann 7 Lm 4 3fach Stäbchen wo hinein denn bitte. Dann 2 3fach in das vorige ich bin verwirrt. Hilfe

04.06.2023 - 17:13

DROPS Design answered:

Liebe Frau Eitel, es ist in die 1. Luftmasche, die gleiche, wo Sie die 2. Kettmasche gehäkelt haben - schauen Sie ab ca 03:30 in diesem Video. Viel Spaß beim häkeln!

05.06.2023 - 10:18

country flag WYBRECHT Denise wrote:

Je suis désolée finalement j’ai assez de laine il m’en reste même un peu j’ ai paniqué hihi .., Je tiens à dire que j’ ai aimé réaliser ce modèle, les explications sont très claires, merci !

03.12.2022 - 14:31

country flag Wybrecht Denise wrote:

Bonjour, j'ai acheté 600 g de laine pour la taille S/M, l'échantillon correspond, tout est Ok, j'arrive à la fin et je me rends compte que je n'aurai pas assez de fil pour faire les bordures finales !!!

02.12.2022 - 09:57

DROPS Design answered:

Bonjour Mme Wybrecht, crochetez-vous en DROPS Nepal? Avez-vous bien le bon nombre de mailles en largeur mais aussi en hauteur (soit 14 double-brides x 5,5 rangs = 10 x10 cm)? Merci!

02.12.2022 - 15:15

country flag Lena wrote:

Eine wunderschöne Jacke! Gibt es eine Anleitung für ein möglichst ähnliches Modell zum Stricken? Es geht weniger um das Muster als um die Form des Jäckchens.

13.10.2022 - 20:48

DROPS Design answered:

Liebe Lena, hier finden Sie alle unsere gestrickten Kreisjacken. Viel Spaß beim stricken!

14.10.2022 - 08:26

country flag Mojca wrote:

Buongiorno, non riesco a capire da dove calcolare le 81 magli laterali per lavorare il davanti sininstro come sotto spiegato. Grazie . Continuare a lavorare solo sulle 81 m.a.d. per ogni lato – cioè non lavorare sulle 39 m.a.d. in alto sul collo o sulle 39 m.a.d. in basso dietro. Continuare con la spiegazione sotto del DAVANTI.

04.10.2022 - 14:03

DROPS Design answered:

Buonasera Mojca, è a cerchio, deve lasciar perdere le maglie vicino al collo e alla fine del dietro a ogni lato e lavorare solo sulle maglie centrali. Buon lavoro!

04.10.2022 - 19:45