DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 2.30 £ /50g
Get the yarn to make this pattern from 20.70£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Dance With Me

Knitted DROPS dress with skirt worked from side to side with short rows and stripes, and knitted top in stocking st with round yoke in "Fabel". Size: S - XXXL

DROPS 128-1
DROPS design: Pattern no FA-137
--------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL

Materials: DROPS FABEL from Garnstudio
Colour no 604, ocean view:
450-500-550-600-650-750 g
Colour no 100, off white:
50-50-50-100-100-100 g

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLES (80 CM) SIZE 3 mm
- or size needed to get 24 sts x 48 rows in garter st = 10 x 10 cm and 24 sts x 32 rows in stocking st = 10 x 10 cm.

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (60 cm) SIZE 2.5 mm - for edges.

DROPS CROCHET HOOK SIZE 2.5 mm - for ties and cones.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 2.30 £ /50g
Get the yarn to make this pattern from 20.70£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (in the round): *K 1 round and P 1 round*, repeat from *-*.

INCREASE TIP: Inc 1 st by making 1 YO, on next row knit YO twisted (i.e. work in the back loop of st instead front) to avoid holes.

DECREASE TIP: Dec by K 2 sts tog.
--------------------------------------------------------

DRESS:
Beg by working a skirt back and forth on circular needle from side to side. To give the skirt width at the bottom work with short rows. Then work round yoke.

LOOSELY cast on 132-134-136-140-142-144 sts on 2 circular needles size 3 mm with 604, ocean view. Pull out one of the needles (to avoid a tight cast on edge) and work as explained below.

The entire skirt is worked in Garter st, i.e. K all rows.
Work first row as follows (from waist down = WS):
Work 8-10-12-14-16-18 sts, insert MARKER 1,
work 14-14-14-16-16-16 sts, insert MARKER 2,
work 18 sts, insert MARKER 3,
work 10 sts, insert MARKER 4,
work 10 sts, insert MARKER 5,
work 6 sts, insert MARKER 6,
work 6 sts, insert MARKER 7,
work 6 sts, insert MARKER 8,
work 6 sts, insert MARKER 9,
work 6 sts, insert MARKER 10,
work 6 sts, insert MARKER 11,
work 6 sts, insert MARKER 12,
work 6 sts, insert MARKER 13,
work 6 sts, insert MARKER 14,
work 6 sts, insert MARKER 15,
work 6 sts, insert MARKER 16,
work the remaining 6 sts.
Move the markers upwards when working.
Continue to work with short rows (NOTE! Tighten the thread on every turn in mid of piece before continuing, to avoid holes) as follows:
* Work 2 rows with 100, off white back and forth over all sts (1st row = RS), work 10-10-10-12-12-14 rows with 604, ocean view back and forth over all sts (= 12-12-12-14-14-16 rows in garter st over all sts).
Then work until MARKER 1, turn and work back.
Work until MARKER 2, turn and work back.
Work until MARKER 3, turn and work back.
Work until MARKER 4, turn and work back.
Work until MARKER 5, turn and work back.
Work until MARKER 6, turn and work back.
Work until MARKER 7, turn and work back.
Work until MARKER 8, turn and work back.
Work until MARKER 9, turn and work back.
Work until MARKER 10, turn and work back.
Work until MARKER 11, turn and work back.
Work until MARKER 12, turn and work back.
Work until MARKER 13, turn and work back.
Work until MARKER 14, turn and work back.
Work until MARKER 15, turn and work back.
Work until MARKER 16, turn and work back over the remaining 6 sts.
Switch to off white and work 2 rows back and forth over all sts. Switch back to ocean view and work until MARKER 16, turn piece and work back.
Then work until MARKER 15, turn and work back.
Work until MARKER 14, turn piece and work back.
Work until MARKER 13, turn and work back.
Work until MARKER 12, turn and work back.
Work until MARKER 11, turn and work back.
Work until MARKER 10, turn and work back.
Work until MARKER 9, turn and work back.
Work until MARKER 8, turn and work back.
Work until MARKER 7, turn and work back.
Work until MARKER 6, turn and work back.
Work until MARKER 5, turn and work back.
Work until MARKER 4, turn and work back.
Work until MARKER 3, turn and work back.
Work until MARKER 2, turn and work back.
Work until MARKER 1, turn and work back.
Work 10-10-10-12-12-14 rows back and forth over all sts with ocean view *.
Repeat from *-* until piece measures approx. 35-40-45-53-58-60 cm vertically (measured at the shortest when piece is flat on the table) - adjust after one whole repetition, but possibly round down to avoid longer measurements. Insert a marker (= side of dress). Repeat from *-* until piece measures approx. 35-40-45-53-58-60 cm from marker (i.e. front and back piece are the same length) then VERY LOOSELY cast off.

ASSEMBLY:
Sew skirt tog in the side - sew edge to edge in front loop of outermost st so that the seam is flat.

BODY:
Beg from RS at side seam and knit up 1 st in every ridge (2 rows in garter st) around the entire opening of the skirt on circular needle size 2.5 mm with off white. P 1 round. K 2 rounds while AT THE SAME TIME adjusting the no of sts to 168-192-216-240-264-288 on 1st round. Then work a lace edge as follows: * 1 YO, K 2 tog *, repeat from *-* the entire round. Then K 2 rounds. Then P 1 round and K 1 round. Now insert a marker in each side, i.e. at beg of round and after 84-96-108-120-132-144 sts - move the markers upwards when working.
Switch to circular needle size 3 mm and ocean view and work in stocking st. AT THE SAME TIME on 2nd round, inc 1 st on each side each marker - READ INCREASE TIP! (= 4 sts inc). Repeat inc every 1½-1½-2½-2½-3-3 cm a total of 6-6-5-5-5-5 times = 192-216-236-260-284-308 sts. When piece measures 11-12-13-14-15-16 cm from where sts were knitted up for body, cast off 12 sts in each side (i.e. 6 sts on each side of both markers) = 84-96-106-118-130-142 sts remain for front and back piece. Put piece aside and knit the sleeves.

SLEEVE:
Worked in the round on double pointed needles. Cast on 74-79-84-89-94-99 sts on double pointed needles size 2.5 mm with ocean view. Insert a marker at beg of round (= mid under sleeve). Work 6 rounds in GARTER ST - see explanation above. Switch to double pointed needles size 3 mm and K 1 round while AT THE SAME TIME casting off 12 sts mid under sleeve (i.e. 6 sts each side of marker) = 62-67-72-77-82-87 sts. Put piece aside and knit another sleeve.

YOKE:
Slip sleeves on to same circular needle as body where armholes were cast off = 292-326-356-390-424-458 sts. Work in stocking st with ocean view while AT THE SAME TIME dec 6-1-5-0-4-10 sts evenly on 1st round = 286-325-351-390-420-448 sts. Insert 11-13-13-13-14-14 markers in piece with 26-25-27-30-30-32 sts between each. After 5-8-5-5-8-5 rounds in stocking st, dec 1 st before every marker - Read DECREASE TIP! Repeat dec on every 6th round a total of 6-6-7-7-7-8 times, then on every other round a total of 3-3-3-4-5-5 times = 187-208-221-247-252-266 sts. After last dec, switch to circular needle size 2.5 mm. K 2 rounds while AT THE SAME TIME adjusting the no of sts to 186-207-219-246-252-264 on last round.
ELEVATION IN BACK OF NECK:
Now work an elevation in back of neck, back and forth on needle as follows:
Insert a marker in the middle st mid front.
Start mid back and work until 19 sts remain before marker at the front, turn piece, tighten thread and work until 19 sts remain before marker in the other side.
Turn piece, tighten thread and work until 46 sts remain before marker at the front, turn piece, tighten thread and work until 46 sts remain before marker in the other side.
Turn piece, tighten thread and work until 67-75-79-85-87-90 sts remain before marker, turn piece, tighten thread and work back until 67-75-79-85-87-90 sts remain before marker in the other side.
Turn piece, tighten thread and work until mid back.
NECKLINE:
P 1 round and K 2 rounds, then work lace edge as follows: * 1 YO, K 3 tog *, repeat from *-* the entire round = 124-138-146-164-168-176 sts remain on needle. K 2 rounds while AT THE SAME TIME dec 6-8-10-20-18-20 sts evenly on the last round = 118-130-136-144-150-156 sts. P 1 round and K 1 round, and then loosely cast off with P sts. Piece measures approx. 82-85-88-91-94-97 cm when flat, it will be longer when dress is worn.

TIE WITH CONE:
Crochet a ch-row on hook size 2.5 mm with off white until row measures approx. 130 cm (or desired measurement around waist). Then work 1 sl st in 4th ch from hook (= beg of cone).
ROUND 1: Work 6 dc in ch-ring.
ROUND 2: Work 2 dc in every dc = 12 dc.
ROUND 3: Work * 1 dc in first dc, 2 dc in next dc *, repeat from *-* the rest of the round = 18 dc.
ROUND 4-7: Work 1 dc in every dc = 18 dc.
ROUND 8: Work * 1 dc in first dc, then work the next 2 dc tog *, repeat from *-* the rest of the round = 12 dc.
ROUND 9: Work 1 dc in every dc = 12 dc.
ROUND 10: Crochet all dc tog 2 by 2 = 6 dc.
ROUND 11: Work all dc tog 2 by 2 = 3 dc.
Cut the thread, baste it up and down through sts, pull the thread to tighten and fasten tightly.
Crochet another cone. Beg by working 4 ch and form a ring with 1 sl st in 1st ch. Then continue as explained above. Sew this cone to the ch-row after the tie has been inserted in the lace edge.
Work another tie for neck with a length of approx. 100 cm.


Diagram

diagram measurements

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Post a comment to pattern DROPS 128-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (141)

Liz wrote:

Lovely dress

11.01.2011 - 00:14

country flag Anke wrote:

Super schön, habe die Stricknadeln schon bereitgelegt

10.01.2011 - 21:31

country flag Elisabeth wrote:

Superflot

10.01.2011 - 18:26

country flag Jorunn T. Hammarstrøm wrote:

Den vil eg gjerne ha oppskrift på. Nydelig.

10.01.2011 - 18:11

country flag Jorunn T. Hammarstrøm wrote:

Den vil eg gjerne ha oppskrift på. Nydelig.

10.01.2011 - 18:11

country flag Jorunn T. Hammarstrøm wrote:

Den vil eg gjerne ha oppskrift på. Nydelig.

10.01.2011 - 18:11

country flag LeneL wrote:

Rigtig sød

09.01.2011 - 23:19

country flag Els Hilders wrote:

Erg mooie patronen

08.01.2011 - 12:59

country flag Verona wrote:

Great dress. Think it may be my drops dress for 2011 - the one last year was great and much admired.

07.01.2011 - 23:33

country flag Elisabeth wrote:

Super flot

07.01.2011 - 10:57