DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 4.55 $ /50g
Get the yarn to make this pattern from 9.10$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 119-39
DROPS design: Pattern no ME-017
--------------------------------------------------------
SIZES:
child-woman-woman-woman
US 13½- 5/6½-7½/9-9½/10½
EU 32/34-35/37-38/40-41/43
Foot length: approx 19-22-24-27 cm / 7½"-8¾”-9½”-10 5/8”
Leg length: approx 15-17-20-22 cm / 6"-6 3/4"-8"-8 3/4"

Materials: DROPS Merino Extra Fine from Garnstudio
100-100-150-150 g color no 16, pink

DROPS DOUBLE POINTED NEEDLES size 3.5 mm / US 4 – or size needed to get 22 sts x 30 rows in stockinette st = 10 x 10 cm / 4'' x 4''.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 4.55 $ /50g
Get the yarn to make this pattern from 9.10$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
HEEL DECREASES:
Row 1 (= RS): Work stockinette st until 6-7-9-9 sts remain, slip next st as if to K, K1, psso, turn piece.
Row 2 (= WS): Work stockinette st until 6-7-9-9 sts remain, slip next st as if to P, P1, psso, turn piece.
Row 3 (= RS): Work stockinette st until 5-6-8-8sts remain, slip next st as if to K, K1, psso, turn piece.
Row 4 (= WS): Work stockinette st until 5-6-8-8 sts remain, slip next st as if to P, P1, psso, turn piece.
Continue dec like this with 1 less st before each dec until there are 8-10-10-10 sts on needle.
--------------------------------------------------------
--------------------------------------------------------

RIGHT SOCK:
Worked in the round on double pointed needles.
Cast on 40-44-52-56 sts on double pointed needles size 3.5 mm / US 4 with Merino Extra Fine. K 1 round and continue in rib K2/P2 until piece measures 10-12-14-16 cm / 4"-4 3/4"-5½"-6 1/4". REMEMBER THE GAUGE! Now keep the first 18-22-26-26 sts on needle for heel and slip remaining 22-22-26-30 sts on a stitch holder = upper foot.
Work stockinette st back and forth on heel sts for 4.5-5-5.5-6 cm / 1 3/4"-2"-2 1/4"-2 3/8". Insert a marker, and now measure piece from here. Dec for heel - see HEEL DEC. After heel dec pick up 10-11-13-15 sts each side of heel and slip the 22-22-26-30 sts from upper foot back on needle = 50-54-62-70 sts. Insert a marker each side of the 22-22-26-30 sts on upper foot. Continue in rib (with P2 each side) on upper foot and stockinette st on sts under foot, AT THE SAME TIME dec each side as follows: K tog into back of loop the last 2 sts before the 22-22-26-30 sts on upper foot and K tog the first 2 sts after the 22-22-26-30 sts on upper foot. Repeat the dec on every other round a total of 6 times for all sizes = 38-42-50-58 sts. When piece measures 16-18-19-22 cm / 6 1/4"-7"-7½"-8 3/4" from marker on heel (3-4-5-5 cm / 1 1/8"-1½"-2"-2" remain) slip the 20-22-26-30 sts from upper foot on a stitch holder and the 18-20-24-28 sts under foot on another stitch holder.

DEC FOR TOES:
Slip 13-15-19-22 sts (on right side of piece as seen from the leg of sock towards the toes) from stitch holder on upper foot and 13-13-17-20 sts from stitch holder under foot (on the same side) back on needle = 26-28-36-42 sts. Cast on 4 new sts towards sts on stitch holders = 30-32-40-46 sts. Insert a marker each side with 15-16-20-23 sts on upper foot and 15-16-20-23 sts under foot. Continue in stockinette st in the round, AT THE SAME TIME on 4th round dec for toes each side of both markers (= 4 dec) as follows: Dec as follows before marker: K2 tog. Dec as follows after marker: K2 tog into back of loop. Dec 1 st each side of marker towards big toe on every other round 3-4-5-6 times and dec 1 st each side of marker towards the side on every round 6-8-10-12 times = 12-8-10-10 sts left on needle. K 1 round and bind off remaining sts. Sew tog at top in outer loops of sts.

BIG TOE:
Slip the remaining 7-7-7-8 sts from stitch holder on upper foot and the remaining 5-7-7-8 sts from stitch holder under foot back on needle. Pick up 2 sts towards the dec for toes = 14-16-16-18 sts. Work stockinette st in the round, AT THE SAME TIME after approx 1 cm / 3/8'' inc 2 sts evenly = 16-18-18-20 sts. Continue in stockinette st until big toe measures approx 3-4-5-5 cm / 1 1/8"-1½"-2"-2". Now K2 tog all the way round = 8-9-9-10 sts. Cut the thread, pull it through remaining sts, tighten and fasten.

LEFT SOCK:
Like right sock but mirrored, i.e. work big toe first and then dec for toes.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 119-39

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (10)

country flag Ferial wrote:

1000 merci pour ce modèle et les personnes qui s activent a nous aider et traduire... merci

08.02.2022 - 03:15

country flag Ferial wrote:

Bonjour et merci pour tout vos efforts a tout les niveaux. Pour les diminutions de la POINTE de l'Orteil...je ne comprends pas du tout...je diminue d 'abord avant et apres les 2 marqueurs tout les 2 tours D ABORD et ensuite je diminue a CHAQUE TOUR???....durant les 2 tours juste du jersey pas de diminutions?....je sais pas si j ai bien compris...merci beaucoup beaucoup....J ADORES ces chaussettes Geisha.

08.02.2022 - 03:14

DROPS Design answered:

Bonjour Mme Ferial et merci. Pour la pointe de la chaussette, vous diminuez différemment côté gros orteil et côté extérieur, mais vous diminuez en même temps, autrement dit: côté gros orteil vous diminuez 2 mailles (1 de chaque côté du marqueur) tous les 2 tours, et, en même temps, vous diminuez côté extérieur (1 m de chaque côté de l'autre marqueur) tous les tours, vous diminuerez donc soit 4 mailles (2 m à chaque marqueur) soit 2 mailles seulement (côté extérieur, car côté gros orteil on diminue tous les 2 tours). Bon tricot!

08.02.2022 - 09:27

country flag Magdalena Allgayer wrote:

Ich bin beim Zeh angekommen und finde hier eine Unstimmigkeit: "Die restlichen 7-7-7-8 M. vom Fussrücken und die restlichen 5-7-7-8 M. vom der Fusssohle auf einem Nadelspiel verteilen, gegen die Spitze 4 neue M. aufnehmen = 14-16-16-18 M. " Die Summe stimmt nicht. Weitere Frage: Soll man die zusätzlichen M. aus den M., die für die Spitze angeschlagen wurden, aufnehmen, oder soll man sie neu anschlagen - dann bleibt eine Lücke.

02.08.2020 - 10:43

DROPS Design answered:

Liebe Frau Allgayer, wenn Sie 38-42-50-58 M hatten, dann stricken Sie die ersten 13-15-19-22 M + 13-13-17-20 M für die Spitze und so bleiben 7-7-7-8 + 5-7-7-8 M für den Zeh. Am besten können Sie die neuen Maschen auffassen, so brauchen Sie nicht die kleine Löcher zusammenzunhähen. Viel Spaß beim stricken!!

03.08.2020 - 08:14

country flag Hanneke wrote:

Als jullie nieuwe sokkenpatronen gaan ontwikkelen, zou er dan ook een patroon voor een complete teensok kunnen komen? dus niet alleen de grote teen apart maar allemaal. Dat zou leuk zijn voor in de vibram five fingers.

01.10.2019 - 22:08

country flag Marlene Tapley wrote:

Hello again, I'm having trouble with the Dec for toes. When I do row 4, have 36 sts, at the end of row 14, have 6 sts not 10. Is there anyway I can send you a picture? I'm Dec on big toe side, rows 6,8,10,12,14, also dec on sides rows 5-14

22.01.2019 - 22:22

DROPS Design answered:

Dear Mrs Tapley, you should decrease 2 sts a total of 5 times for big toe (=10 sts dec) and 2 sts a total of 10 times (= 20 sts dec on the other side = 30 sts dec in total = 10 sts remain. Happy knitting!

24.01.2019 - 13:12

country flag Marlene Tapley wrote:

Writing out my decreases and rows. Having an issue, after heel decreases, doing 3rd size, picking up 13 on each side and slipping 26 from upper foot, I get 52sts, pattern says 62, did I miss something?

17.12.2018 - 00:54

DROPS Design answered:

Dear Mrs Tapley, there are 10 sts remaining from heel + 13 sts picked up on left side of heel + 26 sts from upper foot + 13 sts picked up on right side of heel = 62 stitches. Happy knitting!

17.12.2018 - 10:21

country flag Inger wrote:

Ja ett par tåsockor till. Jättekul, variera mera från traditionella (fast de bhövs också)

24.01.2010 - 11:35

country flag Ann-Karin Rosenlind wrote:

Vilka roliga sockor lite roligt med nya sorts mönster.

23.01.2010 - 18:21

country flag Laillamari wrote:

God ide med ny strømpe model

14.01.2010 - 11:45

country flag Kerstin wrote:

Det behövs mönster till sockar med tåfickor. Bry Er inte om att vissa inte tycker om dem.

05.01.2010 - 14:55