DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 2.30 £ /50g
Get the yarn to make this pattern from 9.20£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 120-34
DROPS design: Pattern no FA-114
--------------------------------------------------------
Size: 35/37 - 38/40 - 41/43
Leg length: approx 26 - 27 - 28 cm
Foot length: approx 23 - 24 - 27 cm
Materials: DROPS FABEL from Garnstudio
100-100-100 g colour no 903, yellow/pink mix
50-50-100 g colour no 911, fun lilac
50-50-100 g colour no 910, sea mist

DROPS CROCHET HOOK size 4.5 mm – or size needed to get 14 tr x 9 tr/rows = 10 x 10 cm.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 2.30 £ /50g
Get the yarn to make this pattern from 9.20£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
STRIPES:
Crochet each round with 2 threads Fabel in stripes as follows: * 2 rounds with 1 thread Fun lilac + 1 thread yellow/pink mix, 2 rounds with 1 thread Sea mist + 1 thread yellow/pink mix *, repeat from *-*.
DECREASING TIP:
Dec 1 tr/dc as follows:
Crochet 1 tr/dc, but wait with the last pull-through, crochet next tr/dc, but when doing the last pull-through pull thread through all sts on hook = 1 dec tr/dc.
--------------------------------------------------------
--------------------------------------------------------

SOCKS:
Crochet from top down.
Crochet 42-44-47 ch with crochet hook size 4.5 mm with 1 thread sea mist + 1 thread yellow/pink mix and form a ring with 1 sl st in first ch. Continue in the round as follows:
Crochet 3 ch (= 1 tr), 1 tr in each of the first 1-3-1 ch, * skip 1 ch, 1 tr in each of the next 4 ch *, repeat from *-* and finish with 1 sl st in 3rd ch from beg of round = 34-36-38 tr. Crochet 1 round with 1 tr in each tr.
Now continue in STRIPES - see above - and as follows:
ROUND 3: 3 ch (= 1 tr), 1 tr in each of the first 9 tr, * skip 1 tr, 2 tr (= 1 tr-group) in next tr *, repeat from *-* a total of 7-8-9 times, 1 tr in each of the last 10 tr and 1 sl st in 3rd ch from beg of round.
There are now 20 tr and 7-8-9 tr-groups on round.
ROUND 4: 3 ch (= 1 tr), 1 tr in each of the first 9 tr, 2 tr (= 1 tr-group) between last tr and first tr-group from previous round, 1 tr-group between all tr-groups (= 6-7-8 times), 1 tr in each of the last 10 tr and 1 sl st in 3rd ch from beg of round.
ROUND 5: 3 ch (= 1 tr), 1 tr in each of the first 9 tr, 1 tr-group between all tr-groups from previous round (6-7-8 times), 1 tr-group between the last tr-group and the first tr from previous round, 1 tr in each of the next 10 tr and 1 sl st in 3rd ch from beg of round.
Repeat round 4 and 5. AT THE SAME TIME on 8th round dec 1 tr each side of 3 ch mid back - see DECREASING TIP! There are now 18 tr and 7-8-9 tr-groups on round.
Repeat the dec on 18th round. There are now 16 tr and 7-8-9 tr-groups on round. Continue until there are 19-20-21 rounds, piece measures approx 21-22-23 cm. Now crochet heel as follows:

HEEL:
Crochet the heel in the 2 threads used on the last round before heel.
Crochet 1 ch, then 1 sl st in 3rd ch from previous row, and 1 sl st in each of the first 7 tr. Turn piece. Crochet 1 dc in each of the 8 sl sts, then 1 dc in each of the next 8 tr = 16 dc (= heel-sts). Turn piece (next row = from RS). Now crochet dc back and forth on heel-sts, AT THE SAME TIME dec 1 dc - see DECREASING TIP - each side on every row until 8 dc remain. Turn piece (next row = from RS). Insert a marker.
Crochet 1 dc in each dc, AT THE SAME TIME at the end of every row crochet 2 new dc along the side on heel. AT THE SAME TIME at beg of every row dec 1 dc. Continue like this until there are 16 dc on row again – you have now crochet in all the rows along the side of heel. Continue in the round.

FOOT:
Continue with Stripes as before.
Work 4 dc between heel-sts and last row on leg before heel. Then crochet 1 tr-group between heel-sts and first tr-group from last row before heel. Now crochet 1 tr-group between all tr-groups on upper foot (= 6-7-8 times), 4 dc between tr-group on upper foot and heel-sts, 1 sl st in each of the next 8 dc on heel and 1 sl st in the next dc. Round now beg here = mid under foot.
ROUND 1: Crochet 3 ch (= 1 tr), 1 tr in each of the first 11 dc, 1 tr-group between all tr-groups from previous row (= 6-7-8 tr-groups), 1 tr-group between the last tr-group and first dc from previous row and 1 tr in each of the last 12 dc/sl sts. There are now 24 tr under foot and 7-8-9 tr-groups on upper foot.
ROUND 2: Crochet 3 ch (= 1 tr), 1 tr in each of the first 9 tr, dec 1 tr, crochet 1 tr-group between the last tr and first tr-group from previous round, then 1 tr-group between all tr-groups (= 6-7-8 times), dec 1 tr, 1 tr in each of the next 10 tr and 1 sl st in 3rd ch from beg of round. You have now dec 1 tr each side of tr-group on upper foot = 22 tr under foot and 7-8-9 tr-groups on upper foot.
ROUND 3: Crochet 3 ch (= 1 tr), 1 tr in each of the first 10 tr, 1 tr-group between each tr-group from previous round (= 6-7-8 tr-groups), 1 tr-group between the last tr-group and first tr from previous round, 1 tr in each of the last 11 tr.
Repeat round 2 and 3 a total of 6-6-7 times. Piece now measures approx 19-19-22 cm from marker on heel and there are 12-12-10 tr under foot and 7-8-9 tr-groups on upper foot.

TOE:
Crochet the toe in the 2 threads used on the last round before toe.
Crochet 1 ch, then 1 dc in each st and finish with 1 sl st in ch from beg of round = 26-28-28 dc.
Insert a marker each side with 12-13-13 dc on upper foot and under foot. Continue in the round, AT THE SAME TIME dec 2 dc each side on every other round as follows: Work round until 1 dc before dc with marker, work 1 dc but wait with the last pull-through (= 2 sts on hook), work 1 dc in dc with marker but wait with the last pull-through (= 3 sts on hook), work 1 dc in next dc, but when doing the last pull-through pull thread through all sts on hook = 2 dec dc.
Dec like this each side 3-4-4 times = 14-12-12 dc on round. Work 1 round with 1 dc in each dc. Cut the thread. Place the sock flat and sew toe tog. Fasten threads.

This pattern has been corrected.

Updated online: 06.09.2016
SOCKS:
Crochet 42-44-47 ch (not 41-43-46 ch)
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 120-34

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (80)

country flag Lynn wrote:

Ik kom er niet uit. Ben met het boordstuk van de sok bezig, maar de stokjes hebben minder hoogte dan de groepsstokjes. Hierdoor wordt mijn haakwerk erg scheef. Iemand een idee wat ik verkeerd doe?

11.05.2013 - 13:48

DROPS Design answered:

Een groep stokjes moet even hoog zijn als een los stokje. Misschien haakt u de groepen losser? Het is steeds dezelfde steek dus de hoogte zou gelijk moeten zijn.

16.05.2013 - 13:26

country flag Diana wrote:

Superfina! Har just lärt mig att sticka strumpor/sockor, men virkning har jag alltid varit duktig på så dessa måste jag prova på. :)

08.09.2012 - 10:47

country flag Marianne wrote:

Har virkelig kæmpet med denne opskrift..forstår ikke der på 4. og 5. omgang, står der begge steder der skal være 6 st gr.(str.35/37)Disse omgange skal så gentages og på 8.omgang er der pludselig 7 st gr, står der..?..der er 7 st gr på 3. omgang og det kunne godt passe med hver anden omgang, men så kan det jo ikke passe med 8. omgang og igen på 18.omgang...Den skal jeg meget gerne ha hjælp med..Marianne

15.02.2011 - 21:18

country flag DROPS Design NL wrote:

Hoi Angela. Op de video doen ze precies hetzelfde met ook vasten net als de hiel in dit patroon. Dus je meerdert en mindert tegelijkertijd, dat lijkt wat tegenstrijdig, maar zo krijg je de ronding in de hiel. Je maakt dus aan het einde van iedere toer 2 v meer erbij, dan keer je het werk en haak je die twee vasten samen - netto heb je dus iedere toer 1 steek meer. Zo neem je steken op aan de zijkanten en wordt je hiel rond. Succes. Tine

16.11.2010 - 10:29

country flag Angela wrote:

Goede morgen. Ik kom er met de hiel niet uit nadat ik de markeerdraad heb geplaatst. Als ik verder ga zoals beschreven, vooral de st. langs de zijkant van de hiel lukken niet. Is dit dezelfde manier als wat te zien is op de instructievideo op deze site? Ik hoor het graag, vast bedankt!

12.11.2010 - 07:45

country flag Monique wrote:

Dank je wel Tine, het klopt helemaal. patroon is wel beetje lastig maar ja, gewoon doen wat er staat, dat werkt dus!!!!

05.10.2010 - 11:03

country flag DROPS Design wrote:

Det er vansklig å forklar uterlige. Kan du høre i butikken?

05.10.2010 - 09:41

country flag DROPS Design NL wrote:

Hoi Monique. Je moet gewoon doen zoals er staat ;o) Minderen aan iedere kant in elke toer tot er 8 v over zijn. Dwz, aan het begin van elke toer op de goede en verkeerde kant. Het kan dan eigenlijk niet fout gaan ;o). Succes. Gr. Tine

04.10.2010 - 11:05

country flag Kristine wrote:

Jeg har heklet den delen som skal vere hælen, men trenger hjelp videre...

02.10.2010 - 15:15

country flag Monique wrote:

Kunt u mij uitleggen of ik in de heengaande toeren moet minderen of in élke toer(ik kom namelijk niet uit na het minderen op de goede kant...): dit staat er: minder TEGELIJKERTIJD 1 v - zie TIP VOOR HET MINDEREN – aan iedere kant elke toer tot er 8 v over zijn. Keer het werk (de volgende toer = aan de goede kant). graag hulp!!!!

01.10.2010 - 15:57