DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 2.30 £ /50g
DROPS Alpaca
DROPS Alpaca
100% Alpaca
from 3.40 £ /50g
Get the yarn to make this pattern from 20.50£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Summer Fruit

Set of knitted jacket and hat in DROPS Fabel plus pants and socks in DROPS Alpaca for baby and children

DROPS Baby 17-23
JACKET:
Size: 1/3 - 6/9 - 12/18 months (2 - 3/4) years
Size in cm: 50/56-62/68-74/80 (86/92-98/104)
Materials: DROPS FABEL from Garnstudio
100-150-150 (150-200) g colour no 903, yellow/pink mix.

HAT:
Size: 1/3 - 6/9 - 12/18 months (2 - 3/4) years
Head circumference: 40/42-42/44-44/46 (48/50-50/52) cm
Materials: DROPS FABEL from Garnstudio
50 g for all sizes colour no 903, yellow/pink mix.

PANTS:
Size: 1/3 - 6/9 - 12/18 months (2 - 3/4) years
Size in cm: 50/56-62/68-74/80 (86/92-98/104)
Materials: DROPS ALPACA from Garnstudio
150-150-200 (200-250) g colour no 6347, dark steel blue.

SOCKS:
Size: 1/3 - 6/9 - 12/18 months (2 - 3/4) years
Foot length: 10-11-12 (14-16) cm
Materials: DROPS ALPACA from Garnstudio
50 g for all sizes colour no 0100, off-white.

JACKET:
DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (60 cm) size 2.5 mm – or size needed to get 26 sts x 34 rows in stocking st = 10 x 10 cm.
DROPS WOODEN BUTTON no 513: 5-5-5 (6-6) pcs.

HAT:
DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (40 cm) size 2.5 mm – or size needed to get 26 sts x 34 rows in stocking st = 10 x 10 cm.

PANTS:
DROPS POINTED NEEDLES size 2.5 mm – or size needed to get 26 sts x 51 rows in garter st = 10 x 10 cm.
ELASTIC: approx 60 cm.

SOCKS:
DROPS DOUBLE POINTED NEEDLES size 2.5 mm – or size needed to get 26 sts x 34 rows in stocking st = 10 x 10 cm.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 2.30 £ /50g
DROPS Alpaca
DROPS Alpaca
100% Alpaca
from 3.40 £ /50g
Get the yarn to make this pattern from 20.50£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (back and forth on needle):
K all rows.

GARTER ST (in the round):
K 1 round, P 1 round.
----------------------------------------------------------
----------------------------------------------------------
JACKET:

BUTTONHOLES:
Make buttonholes on right front band. 1 buttonhole = K tog 2nd and 3rd st from mid front and make 1 YO.
Make buttonholes when piece measures:
SIZE 1/3 MONTHS: 3, 8, 13 and 18 cm.
SIZE 6/9 MONTHS: 3, 9, 14 and 20 cm.
SIZE 12/18 MONTHS: 4, 10, 16 and 22 cm.
SIZE 2 YEARS: 4, 10, 16, 21 and 27 cm.
SIZE 3/4 YEARS: 5, 11, 17, 23 and 29 cm.
NOTE: the last buttonhole is made on neckline.

DECREASING TIP (applies to raglan):
Make all dec from RS.
Dec as follows in each transition between sleeve and body piece - beg 3 sts before marker: K2 tog, K2 (marker sits between these 2 sts), slip 1 st as if to K, K1, psso.
----------------------------------------------------------
JACKET:
BODY PIECE: Worked back and forth on circular needle from mid front.
Cast on 130-144-160 (176-192) sts (includes 5 front band sts each side towards mid front) on circular needle size 2.5 mm with Fabel. Work 4 rows garter st – SEE ABOVE. Continue in stocking st with 5 garter sts each side on front bands.
REMEMBER THE KNITTING TENSION!
When piece measures 3-3-4 (4-5) cm make buttonhole on right front band – SEE ABOVE!
When piece measures 16-17-20 (23-25) cm work 3 rows garter st on all sts (first row = WS).
Work next row as follows from RS: 31-34-38 (41-45) sts = right front piece, cast off 8-8-8 (10-10) sts for armhole, 52-60-68 (74-82) sts = back piece, cast off 8-8-8 (10-10) sts for armhole, 31-34-38 (41-45) sts = left front piece.
Put piece aside and knit the sleeves.

SLEEVE: Worked in the round on double pointed needles.
Cast on 38-40-42 (44-44) sts on double pointed needles size 2.5 mm with Fabel. Work 4 rounds garter st – SEE ABOVE –and continue in stocking st. Insert 1 marker at beg of round = mid under sleeve. When piece measures 5 cm inc 1 st on each side of marker on every 10-8-6 (8-7) round a total of 4-6-8 (9-12) times = 46-52-58 (62-68) sts. When piece measures approx 16-18-20 (25-29) cm P 1 round, K 1 round, P 1 round and K 1 round, AT THE SAME TIME on last round cast off 8-8-8 (10-10) sts mid under sleeve (= 4-4-4 (5-5) sts on each side of marker) = 38-44-50 (52-58) sts left on round. Put piece aside and knit the other sleeve.

YOKE: Slip sleeves in on the same circular needle as body piece where cast off for armholes = 190-216-244 (260-288) sts. Insert a marker in all transitions between sleeves and body piece (= 4 markers).
NOW READ ALL OF THE FOLLOWING BEFORE CONTINUING!
RAGLAN: K 1 row from WS and then continue in garter st on all sts. Now dec for raglan as follows:
Row 1 (= RS): 1 st on each side of all markers (= 8 dec) – SEE DECREASING TIP!
Repeat the dec on every 4th row a total of 9-10-9 (9-9) times and then dec on every other row 3-4-8 (8-11) times.
NECKLINE: AT THE SAME TIME when piece measures 23-25-27 (32-35) cm slip the first 8-10-10 (13-13) sts on next row on a stitch holder for neck, work remaining st on row and then slip the first 8-10-10 (13-13) sts on next row on a stitch holder for neck. Cast off to shape the neckline each side at the beg of every row from mid front: 2 sts 2 times and 1 st 2 times. After all dec for raglan and neckline are complete there are 66-72-76 (86-90) sts left on row and piece measures approx 27-29-33 (37-40) cm.

ASSEMBLY:
Pick up approx 15 to 20 sts on neckline each side on front piece (incl sts on stitch holders) = approx 96 to 130 sts on row. K 1 row from WS, AT THE SAME TIME adjust no of sts evenly to 79-79-85 (91-97) sts (do not dec on front bands). Work next row as follows from RS: 5 garter sts on front band, * K3, P3 *, repeat from *-*, and finish with K3 and 5 garter sts on front band. Continue in rib like this, AT THE SAME TIME on next row from RS make 1 buttonhole in line with the others on front band. When neck measures 2-2½-2½ (3-3) cm cast off in rib. Sew openings under arms. Sew on buttons.
----------------------------------------------------------
HAT:
Worked in the round on circular needle and double pointed needles.
Cast on 98-105-112 (119-126) sts on circular needle size 2.5 mm with Fabel. Work garter st – SEE ABOVE – until piece measures 10-10-10 (12-12) cm and now continue in stocking st.
REMEMBER THE KNITTING TENSION!
AT THE SAME TIME when piece measures 15-16-17 (19-20) cm dec 14-15-16 (17-18) sts evenly by K tog every 6th and 7th st on round = 84-90-96 (102-108) sts. Work 3 rounds stocking st, and repeat the dec on next round with 1 less st between each dec (i.e. K tog every 5th and 6th st). Repeat the dec on every other round another 4 times with 1 less st between each dec = 14-15-16 (17-18) sts. Change to double pointed needles when sts no longer fit circular needle. Cut the thread, pull through remaining sts and fasten. Fold the bottom 5-5-5 (6-6) cm double towards RS and fasten.
Hat now measures 14-15-16 (17-18) cm.
----------------------------------------------------------
PANTS:
Worked in garter st back and forth on needle, in 2 pieces.

RIGHT LEG:
Cast on 52-60-64 (70-74) sts (includes 1 edge st each side) on needle size 2.5 mm with Alpaca. Work garter st – SEE ABOVE. When piece measures 8 cm inc 1 st each side and repeat the inc on every 1.5-2-2.5 (3-4) cm a total of 8 times = 68-76-80 (86-90) sts.
When piece measures 22-25-28 (33-38) cm cast off 2 sts at the beg of next row from RS, work remaining sts on row and cast off 2 sts at the beg of next row from WS, work remaining sts on row = 64-72-76 (82-86) sts. Now cast off 1 st at the beg of every row from RS (i.e at one side of piece = towards mid front) a total of 2-6-6 (10-12) times = 62-66-70 (72-74) sts. Continue in garter st until piece measures 40-46-50 (56-62) cm. Now work 2 cm stocking st on all sts and cast off.

LEFT LEG:
Cast on and work like right leg, but mirrored.

ASSEMBLY:
Sew seams on the inside of legs inside 1 edge st. NOTE: sew the bottom 4-5 cm with seam on the outside so that seam doesn’t show when edge is folded towards RS. Sew pants tog from mid front to mid back inside 1 edge st. Fold the 2 cm stocking st at waist double towards WS and fasten, leave an opening for the elastic. Thread through the elastic. Fold edges at bottom of legs towards RS.
----------------------------------------------------------
SOCKS:

HEEL DECREASES:
Row 1 (= RS): Work row until 6-6-6 (6-7) sts remain, slip next st as if to K, K1, psso, turn piece,
Row 2 (= WS): Work row until 6-6-6 (6-7) sts remain, slip next st as if to P, P1, psso, turn piece,
Row 3 ( = RS): Work row until 5-5-5 (5-6) sts remain, slip next st as if to K, K1, psso, turn piece,
Row 4 (= WS): Work row until 5-5-5 (5-6) sts remain, slip next st as if to P, P1, psso, turn piece.
Continue dec like this with 1 less st between each dec until there are 8-8-10 (10-10) sts on row.

DECREASING TIP:
Dec as follows before marker: K2 tog.
Dec as follows after marker: slip 1 st as if to K, K1, psso.

SOCK:
Worked in the round on double pointed needles.
Cast on 44-44-48 (48-52) sts on double pointed needles size 2.5 mm with Alpaca. Work 4-5-5 (6-6) cm rib, K1/P1, and then K 1 round, AT THE SAME TIME dec 4 sts evenly = 40-40-44 (44-48) sts. Now keep the first 18-18-20 (20-22) sts on needle for heel and slip the remaining 22-22-24 (24-26) sts on a stitch holder = upper foot. Work 3-3½-4 (4-4½) cm stocking st on heel sts. Insert a marker in piece and now dec for heel – SEE ABOVE. After heel dec pick up 8-9-10 (11-12) sts on either side of heel and slip sts from stitch holder back on needles = 46-48-54 (56-60) sts. Insert a marker either side of the 22-22-24 (24-26) sts on upper foot and continue in stocking st on all sts, AT THE SAME TIME dec 1 st on each side of the 22-22-24 (24-26) sts on upper foot – SEE DECREASING TIP. Repeat the dec on every other round a total of 7-6-9 (8-8) times = 32-36-36 (40-44) sts. Continue until piece measures 7-8-9 (10½-12½) cm from marker on heel (approx 3-3-3 (3½-3½) cm remain). Now insert a marker each side with 16-18-18 (20-22) sts on upper foot and 16-18-18 (20-22) sts under foot. Continue in stocking st, AT THE SAME TIME dec 1 st on each side of both markers – SEE DECREASING TIP - on every other round 4 times and then on every round 2-3-3 (4-5) times = 8 sts left. Cut the thread, pull through remaining sts and fasten.
Sock measures approx 10-11-12 (14-16) cm.



Diagram

diagram measurements
diagram measurements

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Baby 17-23

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (78)

country flag BENEVENT wrote:

Bonjour, je voudrais faire ce modèle en 6 ans, comment puis-je faire pour calculer les dimensions ? merci Claire Bénévent

22.05.2015 - 14:04

DROPS Design answered:

Bonjour Claire, vous pouvez recalculer d'après vos mesures en vous inspirant d'un modèle analogue (ex. S22-5) ou d'un autre gilet dans le même groupe de fils. Bon tricot!

22.05.2015 - 16:15

country flag Claartje wrote:

Moeten de onder kanten van de mouwen niet nog vast gezet worden? Volgens mij zie ik hier niks van terug in het patroon of Lees ik verkeerd?

15.03.2015 - 19:08

DROPS Design answered:

Hoi Claartje. Je moet bij het afwerken de openingen onder de armen dichtnaaien bij het afwerken (lees ook aan het eind van AFWERKING)

18.03.2015 - 15:49

Nitza wrote:

Thanks for the pattern. Can you pls explain when I rejoin the stitches on the stitich holder back to the needle ? Nitza

30.01.2015 - 11:19

DROPS Design answered:

Dear Mrs Nitza, please find below a video showing how to slip sts from sleeve on same needle as body. Happy knitting!

30.01.2015 - 13:53

country flag Sabine VR wrote:

Hallo, diese Kombination habe ich gerade mit dem angegebenen Garn laut Anleitung nur in anderen Farben gestrickt. Es geht sehr schnell und sieht einfach super aus. Die Kombination wirkt tatsächlich frisch und fröhlich, anders als die meisten Baby- oder Kleinkindersachen.

29.09.2014 - 13:47

country flag Susanne Bjørkman wrote:

Hvordan undgår man at retkanten i begyndelsen af arbejdet ruller? MVH Susanne

09.09.2014 - 20:48

DROPS Design answered:

Hej Susanne, Du kan dampe kanten let bagefter! God fornøjelse!

10.09.2014 - 12:04

country flag Ellen wrote:

Plaggets mål vises ved hjelp av en skisse. Er skissen tegnet med midtstolpene foran på jakken lagt over hverandre eller mot hverandre?

06.09.2014 - 18:11

DROPS Design answered:

Hei Ellen. Jeg ville sige at det er over hinanden/stolpen knappet.

08.09.2014 - 14:53

country flag Mitsy wrote:

Help, ik heb na alle minderingen, voor de middelste maat, nog 98 steken over ipv 76? als ik de beschrijving lees hou ik ook 98 over?

01.07.2014 - 14:12

DROPS Design answered:

Hoi Mitsy. Vergeet niet dat je ook de eerste 10 st aan beide kanten op een hulpdraad moet zetten voor de hals. Ik krijg dan 76 st over (9 keer 8 st, 8 keer 8 st, 2 keer 10 voor de hals, en 8 + 4 st voor de minderingen aan de hals = 168 st minder = 76 st over)

01.07.2014 - 17:04

country flag Birthe wrote:

Hej! Har satt ihop ärmdelarna med fram-o bakstcket. Har stickat 3 varv o nu undrar jag hur jag ska tänka med att sy ihop öppningen under armen när avmaskningen på armen kommer på ovansidan av armen...dvs när jag gör avmaskningen för raglan så kommer de 10 maskorna på armen nederst. Någon som kan hjälpa?:)

10.07.2013 - 21:59

DROPS Design answered:

Jag är inte helt säker på vad du menar men när du sätter ihop ärmarna med fram- och bak-stycket måste avmaskningen för ärmhål på ärmen komma över avmaskningen för ärmhål på fram- och bakstycket annars går det inte att få ihop det.. Lycka till!

29.08.2013 - 12:22

country flag Birthe wrote:

Hej! Har satt ihop ärmdelarna med fram-o bakstcket. Har stickat 3 varv o nu undrar jag hur jag ska tänka med att sy ihop öppningen under armen när avmaskningen på armen kommer på ovansidan av armen...dvs när jag gör avmaskningen för raglan så kommer de 10 maskorna på armen nederst. Någon som kan hjälpa?:)

10.07.2013 - 21:58

country flag Judy Fry wrote:

Please help with the gauge - I can't get anywhere close to your gauge using Fabel on 2.5mm needles, or on 2.75 or 3.25mm ( 32 st to 10cm) I think if I go any bigger the knitting will be too loose. What do you suggest? thank you Judy Fry

21.06.2013 - 19:07

DROPS Design answered:

Dear Judy, you should try with larger needle, to get the correct measurements to this jacket, you need to have the 26 sts = 10 cm. Happy knitting!

22.06.2013 - 09:51