¡Nos encantaría saber qué piensas acerca de este patrón!
Si quieres escribir una pregunta referente al patrón, por favor asegúrate de elegir la categoría correcta en el formulario debajo, para acelerar el proceso de respuesta. Los campos obligatorios están marcados con un *.
Sharon Hunt- Edwards wrote:
Hi about to do a swatch, but I don’t want to make a hat that that does not fit. The pattern size is a one size, my head is a 23 would this fit?
28.12.2022 - 17:51DROPS Design answered:
Hello Sharon Hunt-Edwards! Because it is an open hood, it will fit any head size! Happy knitting!
29.12.2022 - 19:13Pugliese Enza wrote:
Bonjours madame pouver vous me dire si quand on arrive a 15 cm il faut continuer sur le 38 m ou avec le 13 de l echarpe? Merci pour votre reponce mes salutation
27.12.2022 - 13:20DROPS Design answered:
Bonjour Mme Pugliese, à 15 cm, vous continuez à tricoter toutes les mailles comme avant (= 13 m point mousse (écharpe), jersey jusqu'à ce qu'il reste 13 m (bonnet/capuche), terminez par 13 m point mousse (écharpe)), puis augmentez de chaque côté du marqueur placé au milieu du bonnet (des 38 m). Augmentez ainsi 3 fois tous les 2 rangs (vous aurez ainsi 70 m au total soit 13 m point mousse, 44 m jersey (38+6 augmentations), 13 m point mousse). Bon tricot!
02.01.2023 - 10:03Christine wrote:
Je regarde tous les modèles mais je ne comprends pas du tout vos explications pourriez-vous être plus clair. Bonnet : Avec 1 fil de chaque coloris (= 2 fils tricotés ensemble) et les aiguilles 10 monter 38 m. Tricoter 1 rang envers sur l'env
21.12.2022 - 12:23DROPS Design answered:
Bonjour Christine, le bonnet se tricote avec 1 fil Snow coloris 04 + 1 fil Snow coloris 20 (= 2 fils), montez 38 m ailles avec les aiguilles 10. Tricotez toutes les mailles à l'envers = ce sera l'envers du bonnet. Tournez et tricotez en jersey, avec 1 m point mousse de chaque côté, autrement dit, tricotez maintenant 1 rang endroit sur l'endroit, 1 rang envers sur l'envers et répétez ces 2 rangs pendant 5 cm. Bon tricot!
21.12.2022 - 13:12Nora wrote:
Hei, jeg tror jeg husker at for noen år side fantes det et liknende oppskrift, men med flettemønster både i skjerfet og kysen. Og så fantes det knapper på skjerfdelen. Jeg lastet ned oppskrift denne gangen, men har siden mistet filen, dessverre ... Klarer heller ikke å finne oppskriftet nå, har den blitt tatt ned?
30.11.2022 - 21:20DROPS Design answered:
Hej Nora, vi ved ikke hvilken opskrift du mener, men her ser du alle skjerf med fletter: skjerf flette
01.12.2022 - 14:24Helena Maine wrote:
Thank you for your explanation. I think I am beginning to understand it. The only question I have now is that the pattern instructs to increase, and your answer suggests a decrease. I believe that you meant to increase, as it is in the pattern.
02.02.2019 - 00:38DROPS Design answered:
Dear Mrs Maine, oh yes sorry, you have to increase at marker, not to decrease. Happy knitting!
04.02.2019 - 09:24Helena Maine wrote:
I cannot visualise how this pattern works on the back where the scarf parts and the hood are knitted and joined together. Would it be possible to add a drawing or a picture to see the back, please
26.01.2019 - 14:56DROPS Design answered:
Dear Mrs Maine, when y ou have worked the first 5 cm from hood, and the 2 ends of scarf (= 2 pieces each 34 cm in garter st over 13 sts), work all pieces together like this: 13 sts in garter st (= one end of the scarf), work the 38 sts from hat/hood, and finish row with the 13 sts in garter st (other end of the scarf). Now continue like this as before: garter st and stocking st and decrease on each side of the marker mid on piece. fold piece double and sew the garter sts together then the hood part. Happy knitting!
28.01.2019 - 12:49Karolína wrote:
It is possible to create a video of knitting this model. I don´t understand how I am beginning to knit scarves and hats ,to go scarf together and knit away. Thanks
22.01.2017 - 01:10DROPS Design answered:
Dear Karolina, you first work the beg of the hood and place it aside. Work then the 2 ends of the scarf separately (34 cm over 13 sts), then work all sts tog: 13 sts of one of the scarf, the 38 sts of the hood + the 13 sts of the 2nd scarf = 64 sts. Then work in stocking st with 13 sts in garter st on each side as explained. Happy knitting!
23.01.2017 - 10:33Karolina wrote:
Dobrý den, chtěla bych se zeptat na upřesnění návodu. Když odložím čepici ve výšce 5 cm na pomocnou jehlici a nahazuji na šálu z té samé příze (klubka) nebo pletu šály obě úplně zvlášť? Moc děkuji za odpověď a radu.
22.10.2016 - 22:22Jill Ortiz wrote:
Hola estoy trabajando este patron, no soy experta. y quiero saber si al tener todos los puntos en las agujas del 10(los 64 ptos) se teje cada parte con su estambre o todo con uno solo. a demas, a que se refieren con "tejer la muestra".....???
15.10.2015 - 22:59DROPS Design answered:
Hola Jill. Cuando pasamos todas las partes a una aguja trabajamos la labor como una pieza, con un solo hilo. Recuerde "tejer la muestra".. quiere decir que antes de empezar la labor tienes que hacer una muestra para comprobar la tensión del tejido, en este caso con las agujas rectas DROPS del tamaño 10 mm tejiendo 9 pts x 12 vtas en puntada jersey con 2 hilos Eskimo deberíamos tener una pieza de 10 x 10 cm. Se debe mantener esta tensión del tejido durante toda la labor para que coincidan las medidas. Podría poner igualmente "recuerde mantener la misma tensión de la muestra"
20.10.2015 - 15:44
DROPS 109-56 |
|
|
|
Gorro DROPS en puntada jersey con bufanda en 2 hilos “Snow”. Alternativa de lana 1 hilo “Polaris”.
DROPS 109-56 |
|
GORRO: Mon 38 pts en ag tamaño 10 mm con 1 hilo de cada color = 2 hilos. Tejer 1 vta del revés por el LR, al mismo tiempo colocar un MP en la pieza, es decir, 19 pts en cada lado del MP. Recuerde tejer la muestra! Cont en pt jersey con 1 pt musgo – ver arriba – a cada lado. Cuando la pieza mida 5 cm desl los pts a un gancho o seguro aux. BUFANDA: *Mon 13 pts en ag tamaño 12 mm con 1 hilo de cada color = 2 hilos. Tejer pt musgo hasta que la pieza mida 34 cm y desl los pts a un gancho o seguro aux*, repetir de *a* de manera que tenga 2 bufandas. Desl los 13 pts de la primera bufanda a ag tamaño 10 mm, a cont desl los 38 pts del gorro a la ag y luego los 13 pts de la segunda bufanda = 64 pts en la vta. Ahora cont en pt musgo en 13 pts a cada lado y tejer los pts restantes en pt jersey. Cuando la pieza mida 15 cm, desde donde todos los pts se colocaron en la misma ag, aum 1 pt – ver Tip para aumento – a ambos lados del MP en vtas alternas un total de 3 veces = 70 pts. Cont hasta que la pieza mida 30 cm y rem pts. Coser el gorro y la bufanda por el centro posterior, colocar las piezas orilla con orilla para evitar una costura gruesa. |
|
¿Has realizado este u otro de nuestros modelos? ¡Etiqueta tus fotografías en las redes sociales con #dropsdesign para que podamos verlos! ¿Necesitas ayuda con este patrón?Encontrarás videos tutoriales, un espacio para comentarios/preguntas y más visitando la página del patrón en garnstudio.com © 1982-2024 DROPS Design A/S. Todos los derechos reservados. Este documento, incluyendo todas sus sub-secciones, está protegido por los derechos de autor (copyright). Lee más acerca de lo que puedes hacer con nuestros patrones en la parte de abajo de cada patrón de nuestro sitio. |
Pugliese Enza wrote:
Bonjours madame, je oublier de vous dire de me tricoter le bonnet en ronds sans pouente ou capuchon merci
29.12.2022 - 09:22