DROPS Alpaca
DROPS Alpaca
100% Alpaca
from 4.85 $ /50g
DROPS Cotton Viscose
DROPS Cotton Viscose
54% Cotton, 46% Viscose
Discontinued
find alternatives
DROPS Super Sale

DROPS 106-27

DROPS jacket with short sleeves in lace pattern and with rib border in “Cotton Viscose” and “Alpaca”. Size S – XXXL

DROPS 106-27
Size: S – M/L - XL – XXL - XXXL
Finished measurements:
Bust: 34 5/8"-39 3/8"-45"–49½"-54 1/4"
Hem: 42½"-48"-52 3/4"–57 3/8"-62"
Full length: 29 1/8"-30"-30 3/4"-31½"-32 1/4"

Materials:DROPS Cotton Viscose from Garnstudio
no 17, light beige: 450-500-550-600-700 g color
and use: DROPS Alpaca from Garnstudio
color no 302 camel: 300-350-400-400-450g

DROPS circular needle 80 cm size 5.5 mm [31½’’US 9] - or size needed to obtain 16 sts x 20 rows in pattern with 1 thread of each quality = 10 x 10 cm [4’’ x 4’’].

DROPS circular needle 80 and 40 cm size 4.5 mm [31½’’ and15 3/4’’ US 7] - for rib.

DROPS Mother-of-pearl button w/holes, no 540, 3 pcs.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Alpaca
DROPS Alpaca
100% Alpaca
from 4.85 $ /50g
DROPS Cotton Viscose
DROPS Cotton Viscose
54% Cotton, 46% Viscose
Discontinued
find alternatives

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
Measurement tip: Because of the weight of the yarn, all measurements should be made whilst the garment is hanging, otherwise it will be too long when worn.

Pattern: See diagram M.1 and M.2. The diagram shows the pattern from the RS.

Garter st, back and forth on needle: K all rows.

Back and front piece: Knitted back and forth on circular needle from mid front.
Cast on 209-234-264-289-314 sts (includes 1 edge st each side) on circular needle size 4.5 mm [US 7] with 1 thread of each quality.
K 1 row from WS and continue as follows from RS: 1 edge st, Rib K2/P3 on the next 205-230-260-285-310 sts and finish row with K2 and 1 edge st. Continue in Rib until piece measures 12 cm [4 3/4’’] - see Measurement tip - adjust so that last row is from RS. Change to needle size 5.5 mm [US 9] and P 1 row WS, at the same time dec 54-59-69-74-79 sts evenly = 155-175-195-215-235 sts.
Continue as follows from RS:
Size S + XL + XXXL: 1 edge st, * P1, M.1*, repeat from *-* a total of 2-3-4 times, P1, M.2, K8, P1, K8, *M.1, P1*, repeat from *-* a total of 6-8-10 times, M.1, K8, P1, K8, M.2, P1, *M.1, P1*, repeat from *-* a total of 2-3-4 times and finish row with 1 edge st.
Size M/L + XXL: 1 edge st, * P1, M.1*, repeat from *-* a total of 3-4 times, K8, P1, K8, *M.1, P1*, repeat from *-* a total of 7-9 times, M.1, K8, P1, K8, * M.1, P1*, repeat from *-* a total of 3-4 times and finish row with 1 edge st.
Remember the knitting gauge!
Insert 2 Marking Threads (MT) 35-40-45-50-55 sts in from each side (MT is in P1 between K8 each side). Continue in pattern, at the same time dec 1 st on each side of both MT on every 5 cm [2’’] a total of 8 times = 123-143-163-183-203 sts. Continue in pattern until piece measures 52-53-54-55-56 cm [20½’’-21’’-21 1/4’’-21 5/8’’-22’’] and now bind off st with MT each side and complete back and front pieces separately.

Back piece: = 69-79-89-99-109 sts. Continue in pattern as before. When piece measures 72-74-76-78-80 cm [31½’’] bind off the middle 25-25-29-29-31 sts for neck = 22-27-30-35-39 sts left on each shoulder. Continue in garter st on all sts – see above – and bind off when piece measures 74-76-78-80-82 cm [29 1/8"-30"-30 3/4"-31½"-32 1/4"].

Left front piece: = 26-31-36-41-46 sts. Continue in pattern as before. When piece measures 64-66-68-70-72 cm [25 1/4’’-26’’-26 3/4’’-27½’’-28 3/8’’] dec to shape the neckline on every other row: 2 sts 0-0-1-1-1 time and 1 st 4-4-4-4-5 times = 22-27-30-35-39 sts left on shoulder. Note! Because of the decreases number of sts does not fit M.1, work sts not fitting into pattern in stockinette st. Bind off when piece measures 74-76-78-80-82 cm [29 1/8"-30"-30 3/4"-31½"-32 1/4"].

Right front piece: Like left front piece, but mirrored.

Assembly: Sew shoulder seams.

Sleeves: Worked in the round. Pick up 90-95-100-105-110 sts round the armhole on small circular needle size 4.5 mm [US 7].
K 1 round, P 1 round and continue in Rib, K2/P3. When Rib measures 15 cm [6’’] bind off in rib.

Front bands: Worked back and forth on circular needle. Pick up 135-140-145-150-155 sts from neckline down along left front piece on circular needle size 4.5 mm [US 7]. K 1 row from WS and K 1 row from RS. Now continue in Rib from bottom edge towards neckline as follows (first row = WS): 4 garter sts, *P2, K3*, repeat from *-* and finish with 1 edge st. When Rib measures 12 cm [4 3/4’’] bind off.
Repeat along right front piece, but when Rib measures 11 cm [4 3/8’’] make 3 buttonholes, the top buttonhole in the first P-part from neckline and the bottom one 17-18-19-20-21 cm [6 3/4’’-7’’-7½’’-8’’-8 1/4’’] from neckline.
1 buttonhole = bind off 2 sts and cast on 2 new sts on return row. Bind off in rib when Rib measures 12 cm [4 3/4’’].

Neckline: Worked back and forth on needle. Pick up 140-140-150-150-155 sts on needle size 4.5 mm [US 7] round neckline and over front bands. K 1 row from WS and K 1 row from RS. Continue in Rib as follows: 4 garter sts, *P2, K3*, repeat from *-* and finish with P2 and 4 garter sts. Work 5 cm [2’’] Rib and bind off.
Sew on buttons.

Diagram

All measurements in charts are in cm.

symbols = K from RS, P from WS
symbols = P from RS, K from WS
symbols = K2 tog, 1 YO
symbols = 1 YO, slip 1 st as if to K, K1, psso
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 106-27

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (17)

Ginette Rivard wrote:

Bonjour, je trouve ce modele très beau mais lorsque je travail le M1 je ne suis pas capable de faire à partir de la ligne 10 jusqu'à la ligne 16 cela ne donne pas le même résultat. J'aimerais que vous me l'expliquiez plus en détail s.v.p. merci et j'attends de vos nouvelle

24.06.2012 - 02:47

DROPS Design answered:

Bonjour Ginette, le rapport se termine en jersey end MAIS les rangs 12 et 14 se tricotent à l'env sur l'end. La légende des symboles se trouve juste au-dessus du schéma. bon tricot !

25.06.2012 - 09:01

Nice Bett wrote:

Amei que vcs colocaram as receitas em português, acho a garnstudio o máximo... adoro tudo!!

16.04.2009 - 16:40

country flag Helle Jensen wrote:

Kedelig og kloset Synd

28.01.2008 - 13:06

country flag Diane wrote:

Love it!

10.01.2008 - 17:20

country flag Leesa Clifton wrote:

Beautiful

09.01.2008 - 14:51

country flag Josephine wrote:

Mkt snygg, känns jätteinne och fräsch, ska göra de direkt när mönstret kommer!

08.01.2008 - 17:53

country flag Anne wrote:

Kjempefin! Gleder meg til oppskriften kommer.

08.01.2008 - 15:24

country flag Ann Kouzas wrote:

Jättefin!!! fräsig modell Skulle vilja göra den med lång ärm också,

04.01.2008 - 21:13

country flag Ann Kouzas wrote:

Jättefin!!! fräsig modell Skulle vilja göra den med lång ärm också,

04.01.2008 - 21:12

Le wrote:

I Love this pattern very much,must be very comfortable look great wow just love it txs for it !!!!

03.01.2008 - 15:55