Noi saremmo felici di ricevere i tuoi commenti e opinioni su questo modello!
Se vuoi fare una domanda, fai per favore attenzione a selezionare la categoria corretta nella casella qui sotto per velocizzare il processo di risposta. I campi richiesti sono indicati da *.
Moonlight Mist |
|
|
|
Giacca DROPS, lavorata in tondo, all’uncinetto, con 2 capi del filato "Alpaca". Taglie: Dalla S alla XL.
DROPS 99-3 |
|
Lavorare la giacca in tondo, seguire le indicazioni per il cerchio. Iniziare gli scalfi in corrispondenza dei giri 12-13-14. Lavorare 2 giri seguendo le indicazioni per gli SCALFI, poi riprendere seguendo le indicazioni per il cerchio. CAMPIONE: 3 righe del cerchio con l’uncinetto n° 6 e 2 capi del filato Alpaca = 6,5 cm. Dopo il giro 5, il cerchio misura 20 cm di diametro. SUGGERIMENTO PER IL LAVORO: Sostituire la prima m.a.d di ogni giro con 4 cat. Finire ogni giro con 1 m.bss nella prima m del giro. SUGGERIMENTO PER PRENDERE LE MISURE: Per via del peso del filato, prendere tutte le misure con il capo appeso; in caso contrario le maniche saranno troppo lunghe quando si indosserà la giacca. ------------------------------------------------------- CERCHIO: Avviare 4 cat con 2 capi del filato Alpaca e formare un anello con 1 m.bss nella prima cat. Giro 1: Lavorare 8 m.b nell’anello. Giro 2: Vedere il SUGGERIMENTO PER IL LAVORO ! Lavorare 3 m.a.d in ogni m.b. Unire con 1 m.bss = 24 m.a.d. Giro 3: 1 m.a.d, *3 cat, saltare 1 m.a.d, 1 m.a.d nella m.a.d successiva*, ripetere da *-* su tutto il giro e finire con 3 cat e 1 m.bss nella prima m del giro = 12 m.a.d. Giro 4: 3 m.a.d nella prima m.a.d ,*3 cat, saltare 3 cat, 3 m.a.d nella m.a.d successiva *, ripetere da *-* e finire con 3 cat, saltare 1 m.a.d e 1 m.bss nella prima m del giro = 36 m.a.d. Giro 5: 1 m.a.d in ogni m.a.d e 3 m.a.d in ogni arco di cat = 72 m.a.d. Il cerchio misura ora ca.20 cm di diametro. Giro 6: 1 m.a.d nella prima m.a.d, *3 cat, saltare 1 m.a.d, 1 m.a.d nella m.a.d successiva *, ripetere da *-* e finire con 3 cat, saltare 1 m.a.d e finire con 1 m.bss nella prima m del giro = 36 m.a.d. Giro 7: 3 m.a.d nella prima m.a.d,* 2 cat, saltare 3 cat, 3 m.a.d nella m.a.d successiva *, ripetere da *-* e finire con 2 cat, saltare 3 cat e finire con 1 m.bss nella prima m del giro = 108 m.a.d. Giro 8: 1 m.a.d in ogni m.a.d e 1 m.a.d in ogni arco di cat = 144 m.a.d. Giro 9: 1 m.a.d nella prima m.a.d, *3 cat, saltare 2 m.a.d, 1 m.a.d nella m.a.d successiva *, ripetere da *-* e finire con 3 cat, saltare 2 m.a.d e 1 m.bss nella prima m del giro = 48 m.a.d Giro 10: 3 m.a.d nella prima m.a.d, *1 cat, 3 m.a.d nella m.a.d successiva *, ripetere da *-* e finire con 1 cat e 1 m.bss nella prima m del giro = 144 m.a.d. Giro 11: 1 m.a.d in ogni m.a.d e 1 m.a.d in ogni arco di cat = 192 m.a.d. Taglia S/M – per gli SCALFI, lavorare ora come indicato per i giri 12 e 13 nella sezione SCALFI riportata di seguito! Giro 12: *1 m.a.d, 3 cat, saltare 2 m.a.d *, ripetere da *-* fino alla fine del giro = 64 m.a.d. Taglia M/L – per gli SALFI, lavorare ora come indicato per i giri 13 e 14 nella sezione SCALFI riportata di seguito! Giro 13: 3 m.a.d nella prima m.a.d, *2 cat, 3 m.a.d nella m.a.d successiva *, ripetere da *-* su tutto il giro = 192 m.a.d. Taglia XL – per gli SCALFI lavorare ora come indicato per i giri 14 e 15 nella sezione SCALFI riportata di seguito! Giro 14: 1 m.a.d in ogni m.a.d, 1 m.a.d in ogni arco di cat = 256 m.a.d. Giro 15: 1 m.a.d nella prima m.a.d, *3 cat, saltare 2 m.a.d, 1 m.a.d nella m.a.d successiva *, ripetere da *-* fino alla fine del giro = 86 m.a.d. Giro 16: 3 m.a.d nella prima m.a.d, *2 cat, 2 m.a.d nella m.a.d successiva, 2 cat, 3 m.a.d nella m.a.d successiva *, ripetere da *-* su tutto il giro = 215 m.a.d. Ripetere i giri 14, 15 e 16 con gli aumenti, finché il cerchio non misura 100-110-120 cm di diametro. SCALFI: Taglia S/M: Lavorare per gli scalfi come indicato nel giro 12 qui di seguito: Giro 12: 1 m.a.d, 26 cat, saltare le 26 m.a.d successive, *1 m.a.d, 3 cat, saltare le 2 m.a.d successive *, ripetere da *-* per un totale di 14 volte, 1 m.a.d, 26 cat, saltare 26 m.a.d, *1 m.a.d, 3 cat, saltare 2 m.a.d *, ripetere da *-* fino alla fine del giro = 48 m.a.d. Giro 13: Lavorare come segue intorno alle 26 cat: * 3 m.a.d, 2 cat *, per un totale di 8 volte. Sulle m.a.d lavorare come segue: *3 m.a.d in ogni m.a.d, 2 cat *, ripetere da *-* = 192 m.a.d. Proseguire con il giro 14 come indicato sopra. Taglia M/L: Lavorare per gli scalfi come indicato nel giro 13 qui di seguito: Giro 13: 3 m.a.d nella prima m.a.d, 30 cat, saltare (1 m.a.d e 3 cat) per un totale di 7 volte, 3 m.a.d nella m.a.d successiva, *2 cat, 3 m.a.d nella m.a.d successiva *, ripetere da *-* per un totale di 15 volte, 30 cat, saltare (1 m.a.d e 3 cat) per un totale di 7 volte, *2 cat, 3 m.a.d nella m.a.d successiva *, ripetere da *-* fino alla fine del giro = 150 m.a.d. Giro 14: Lavorare 28 m.a.d sulle 30 cat; sulle m.a.d e nell’arco di cat lavorare come segue: 1 m.a.d in ogni m.a.d, 1 m.a.d in ogni arco di cat = 256 m.a.d. Proseguire con il giro 15 come indicato sopra. Taglia XL: Lavorare per gli scalfi come indicato nel giro 14 qui di seguito: Giro 14: 34 cat, saltare (3 m.a.d e 2 cat) per un totale di 8 volte, *1 m.a.d in ognuna delle 3 m.a.d successive, 1 m.a.d nell’ arco di cat successivo *, ripetere da *-* per un totale di 16 volte, 34 cat, saltare (3 m.a.d e 2 cat) per un totale di 8 volte *1 m.a.d in ognuna delle m.a.d successive, 1 m.a.d nell’ arco di cat successivo *, ripetere da *-* fino alla fine del giro = 192 m.a.d. Giro 15: Lavorare come segue intorno alle 34 cat: *1 m.a.d, 3 cat *, ripetere da *-* per un totale di 11 volte. Sulle m.a.d lavorare come segue: 1 m.a.d, *3 cat, saltare 2 m.a.d, 1 m.a.d nelle m.a.d successive *, ripetere da *-* e finire con 1 m.a.d nell’ ultima m.a.d = 86 m.a.d. Proseguire con il giro 16 come indicato sopra. MANICHE: Lavorare le maniche dagli scalfi verso i polsi, con 2 capi del filato Alpaca. Lavorare in tondo. Ricordarsi il SUGGERIMENTO PER IL LAVORO ! Giro 1: Lavorare 52-60-68 m.a.d intorno lo scalfo, e finire con 1 m.bss nella prima m.a.d dall’inizio del giro. Giro 2: 1 m.a.d nella prima m.a.d, *3 cat, saltare 3 m.a.d, 1 m.a.d nella m.a.d successiva *, ripetere da *-* e finire con 3 cat e 1 m.bss nella prima m.a.d = 13-15-17 m.a.d. Giro 3: 2 m.a.d nella prima m.a.d, *1 cat, saltare 3 cat, 2 m.a.d nella m.a.d successiva *, ripetere da *-* e finire con: 1 cat e 1 m.bss nella prima m del giro = 26-30-34 m.a.d. Giro 4: 1 m.a.d in ogni m.a.d e 2 m.a.d in ogni cat = 52-60-68 m.a.d. Ripetere i giri 2, 3 e 4 finché le maniche non misurano 52-54-56 cm dagli scalfi – vedere il suggerimento per prendere le misure. Tagliare e fermare i fili. BORDO: Lavorare un bordo tutto intorno al cerchio e nella parte inferiore delle maniche, con 2 capi del filato Alpaca, come segue: Giro 1: 1 m.a.d nella prima m.a.d, *2 cat, saltare 1,5 - 2 cm, 1 m.a.d nella m successiva *, ripetere da *-* e finire con 2 cat e 1 m.bss nella prima m.a.d. Giro 2: 2 m.a.d nella prima m.a.d, *4 cat, 2 m.a.d nella stessa m.a.d, 1 cat, 2 m.a.d nella m.a.d successiva *, finire con 4 cat, 2 m.a.d nella stessa m.a.d, 1 cat e 1 m.bss nella prima m.a.d. Tagliare e fermare il filo. RIVESTIMENTO PER I BOTTONI: Giro 1: Avviare 2 cat con 2 capi del filato Alpaca; lavorare 6 m.b nella prima delle 2 cat e unire con 1 m.bss nella prima m.b. Giro 2: 1 cat, 2 m.b in ogni m.b e finire con 1 m.bss all’inizio del giro (= 12 m.b) Giri 3 + 4: 1 cat, 1 m.b in ogni m.b e finire con 1 m.bss all’inizio del giro (= 12 m.b). Giro 5: 1 cat, * 1 m.b nella m successiva, saltare 1 m.b *, ripetere da *-* su tutto il giro e finire con 1 m.bss all’inizio del giro (= 6 m.b). Mettere il bottone all’interno del rivestimento, cucire intorno e stringere. Indossare la giacca e cucire i bottoni all’altezza della cintura, sul lato sinistro della giacca, sul penultimo giro del cerchio. Abbottonare attraverso gli archi sul davanti destro. |
|
Avete realizzato questo o un altro dei nostri modelli? Taggate le vostre foto nei social media con #dropsdesign in modo che possiamo vederle! Avete bisogno di aiuto con questo modello?Troverete video tutorial, una sezione per i commenti/domande e molto altro guardando il modello su www.garnstudio.com © 1982-2024 DROPS Design A/S. Ci riserviamo tutti i diritti. Questo documento, compreso tutte le sue sotto-sezioni, è protetto dalle leggi sul copyright. Potete leggere quello che potete fare con i nostri modelli alla fine di ogni modello sul nostro sito. |
Commenti / Domande (501)
Cheryl Taylor wrote:
Rd 3, where does 1st stitch go? I ch 4 (= 1tr), ch 3, skip 1tr. Do I go into 3rd tr with a chain of 7? Rd 5, 6, 8, 9, 11, 12, 14, 15 , where do I place 1st stitch after ch 4 (tr)? Also, in bind off for XL, Do I ch 4 at the beginning of rd 15 and 16? Thank you.for all your help!
06.12.2019 - 01:20DROPS Design answered:
Dear Mrs Taylor, not sure to really understand your meaning here sorry, start round 3 with 4 chains (= 1st tr), then crochet *3 chains (=1st ch-space) (= a total of 7 ch); then skip next tr, work 1 tr in next tr* and repeat from *-* (= you work in every other tr from round 2 = there are now 12 tr and 12 3-ch-spaces. See crochet info about beg/end of each round. On row 14 size XL, start with 4 chains, then crochet the 34 ch for 1st armhole. Happy crocheting!
06.12.2019 - 08:35Cheryl Taylor wrote:
I apologize for all the questions. Instructions say chain 4 to begin every rd (counts as tr). However, what do I do for Rd 3? It say 1tr, 3ch, skip 1 tr, etc. If I chain 4 for tr, I'll have 7 chains? What am I supposed to do for Rd 3? Thank you so much.
05.12.2019 - 01:00DROPS Design answered:
Dear Mrs Taylor, on row 3, replace the first tr with 4 ch - as under crochet info and work: 4 chains (= 1st tr), and repeat now from *-* (so that you will have 7 chains, the first 4 are for the first tr and the next 3 are for the chain-space) and finish with 1 sl st in 4th chain from beg of the round. Happy crocheting!
05.12.2019 - 10:30Cheryl Taylor wrote:
On the rounds where it doesn't say to sl st, do I assume that I should sl st? I'm referring to rounds 5,8, 11, 12, 13, 14, 15 & 16. These instructions are very confusing.
02.12.2019 - 20:24DROPS Design answered:
Dear Mrs Taylor, begin every round with 4 ch to replace first tr on the round and finish each round with a sl st in the 4th ch from beg of round - see Crochet Info at the beg of the pattern. Happy crocheting!
03.12.2019 - 10:25Cheryl Taylor wrote:
Can you please explain the instructions for Round 4 of the Circle? I'm confused
27.11.2019 - 07:40DROPS Design answered:
Dear Mrs Taylor, on round 4 you will work 3 tr in each of the 12 tr from round 3, and work 3 chains between each time you work 3 tr = you will have 36 tr and 36 ch-spaces. Happy crocheting!
27.11.2019 - 08:17Pam Doty wrote:
I have completed round 8 ending with 144 tr. I am stuck on round 9 as it says you should end up with 48 tr after doing the 1 tr in first tr, *3 ch, skip 2 tr, 1 tr in next tr and repeat*. How do I go from the previuous round's 144 tr to 48 tr on round 9?
26.11.2019 - 22:40DROPS Design answered:
Dear Mrs Doty, on round 9 you will skip trebles to work as follows: 1 tr in first tr, then repeat: (3 ch, skip 2 tr, 1 tr in next tr) so that you work 3 ch + 1 treble over next 3 trebles. Repeat from (to) a total of 48 times = there are now 48 trebles and 48 ch-spaces. Happy crocheting!
27.11.2019 - 07:57Michelle wrote:
Hello, I would like to make this garment in larger sizes (such as 3X or 4X) than are given in the pattern. Do you have a plus-size pattern or instructions for making this pattern in larger sizes? Thank you.
25.09.2019 - 20:05DROPS Design answered:
Dear Michelle, this pattern is only to size XL, but you can get inspired by similar patterns availables in XXXL. Happy knitting!
26.09.2019 - 10:10Cheryl Taylor wrote:
Do you have a chart with the abbreviations and their meanings available? I'm not sure about some of the abbreviations used here.
03.08.2019 - 02:02DROPS Design answered:
Dear Cheryl, this link can help you with the abbreviations: it's a dictionary of the most frequent terms used in DROPS patterns. Happy crocheting!
03.08.2019 - 12:55Cheryl Taylor wrote:
I would like to make this pattern without the sleeves. I\'m a beginner so can you explain to me exactly how to do this? I am making in XL and want it to be a bit longer. How do I do this?
15.07.2019 - 03:40DROPS Design answered:
Dear Mrs Taylor, For a sleeveless jacket, you might work the jacket with armholes as explained, and maybe then just finish with a small edge around armholes instead of working sleeves. We are unfortunately not able to adapt every pattern to every single request, but you are welcome to contact the store where you bought the yarn (even per mail or telephone) for any individual assistance. Happy crocheting!
15.07.2019 - 11:27Elana wrote:
I am making this in XL. I am confused on round 15 where I am supposed to crochet over the 34 chain. It says to do the instructions 11 times. But that will not take me to the end of the 34 chain. Am I supposed to skip some chains? I'm stuck.
04.07.2019 - 22:55DROPS Design answered:
Dear Elena, on row 15 crochet the 11 times over the chain (do not crochet in the chain stitches but around the 34-chain-spaces, if you get the correct number of stitches on row before, then it should work. Happy crocheting!
05.07.2019 - 08:36Judie Harmer wrote:
I would like to make this for my 5year granddaughter but can’t locate the child size pattern.
17.06.2019 - 16:51DROPS Design answered:
Dear Mrs Harmer, you will find all our crochet circle jackets for children here to help you adjusting this pattern to a child size. Happy crocheting!
18.06.2019 - 08:24