DROPS Karisma
DROPS Karisma
100% Wool
from 2.30 £ /50g
Get the yarn to make this pattern from 25.30£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 52-11
Sizes:
Women’s Small - Medium - Large
Finished measurements: 114-120-126 cm
Men’s Small/Medium - Medium/Large
Finished measurements: 120 - 126 cm
Numbers in ( ) are men’s sizes.

Materials: DROPS KARISMA SUPERWASH from Garnstudio
400-450-500 (550-600) g Main Color (MC)
300-350-400 (400-450) g col A
50-50-50 (50-50) g col B
50-50-50 (50-50) g col C
50-50-50 (50-50) g col D
See color alternatives below under «Pattern».

DROPS 2.5 mm and 3.5 mm circular needles and double pointed needles, or sizes needed to obtain correct gauge.

Sweater with zipper:
Zipper, 20 cm black

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Karisma
DROPS Karisma
100% Wool
from 2.30 £ /50g
Get the yarn to make this pattern from 25.30£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
Gauge: 22 sts and 30 rows on larger needles in stockinette stitch = 10 x 10 cm

Pattern: See charts (1 chart = 1 repeat). The pattern is shown from the right side and is knit entirely in stockinette stitch.
Patterns 1, 2, 3, 5 and 7 have arrows indicating the starting points for different sizes; Patterns 4 and 6 are identical for all sizes.

= MC
= A
= B
= C
= D

Alt. 1
= bluegreen
= lt brown
= mustard
= wine red
= light olive

Alt. 2
= natural white
= bluegreen
= wine red
= dark olive
= light olive

Alt. 3
= wine red
= lt brown
= light olive
= bluegreen
= mustard

Rib: * Knit 1, purl 1 *, repeat from * - *.

Body: The sweater is knit in the round on circular needles with steeks for armholes.
Numbers in ( ) = men's sizes; pattern and color variations are in [ ] and italics.
Cast on 190-198-210 (200-212) sts on smaller circular needles with color A; join and place a marker at the join. Knit rib as follows: 1 row color A, change to MC and knit until the rib measures 5 cm. Change to larger circular needles 1and inc 62-66-66 (64-64) sts evenly distributed on the first row = 252-264-276 (264-276) sts. Knit Pattern 1 [Pattern 7, Pattern 1].
Attach a marker on other side so that front and back each have 126-132-138 (132-138) sts. After Pattern 1 [Pattern 7, Pattern 1] knit Pattern 2 - start at the appropriate arrow on the chart and knit the front, start at the arrow again and knit the back. Then knit Pattern 3 until the work measures approximately 22-24-26 (29-32) cm - adjust for complete pattern (a whole number of repeats must be knit). Continue knitting as follows: Front: Start at the appropriate arrow and knit 36-39-42 (39-42) sts of Pattern 3, then Pattern 4 (54 sts), then 36-39-42 (39-42) sts of Pattern 3. Repeat over the back. Continue for 24 rows, then knit as follows: Front: Start at the appropriate arrow and knit 36-39-42 (39-42) sts of Pattern 5, then Pattern 4 (54 sts), then 36-39-42 (39-42) sts of Pattern 5. Repeat over the back. At the same time, when the work measures 33-35-36 (39-41) cm inc 5 sts at each marker (these sts are for the steeks and are not knitted into the pattern). Continue pattern as established.

Sweater with zipper: When the work measures 36-38-40 (43-46) cm (approximately 24 cm of the work remains), knit the next row as follows: 5 steek sts, 61-64-67 (64-67) sts front, bind off 4 sts for neck split, 61-64-67 (64-67) sts front, 5 steek sts, 126-132-138 (132-138) sts back. Knit the rest of the work back and forth on needles. When Pattern 4 and Pattern 5 are completed knit Pattern 6, then Pattern 1 [Pattern 7-Pattern 1] to finished dimensions.
At the same time, when the work measures 53-55-57 (60-63) cm, bind off at each neck edge (center front) every other row: 11-12-13 (13-13) sts 1 time, 3 sts 1 time, 2 sts 2 times, 1 st 3 times -- shoulders = 41-43-45 (42-45) sts. At the same time, when the work measures 58-60-62 (65-68) cm, bind off the center back 42-44-46 (46-46) sts for the neck. Then bind off 2 sts on each back neck edge on the next row. Bind off all sts after Pattern 1 [Pattern 7-Pattern 1] - the work measures approximately 60-62-64 (67-70) cm.

Sweater with round neck: After Pattern 4 and Pattern 5 are complete, knit Pattern 6 once, then Pattern 1 [Pattern 7-Pattern 1] to finished dimensions. At the same time, when the work measures approximately 53-55-57 (60-63) cm bind off the center front 26-28-30 (30-30) sts for the neck and knit the rest back and forth on needles. Then bind off at each neck edge every other row: 3 sts 1 time, 2 sts 2 times, 1 st 3 times. When the work measures 58-60-62 (65-68) cm, bind off the center back 42-44-46 (46-46) sts for the neck. Then bind off 2 sts at each back neck edge on the next row. Bind off all sts after Pattern 1 [Pattern 7-Pattern 1] - the work measures approximately 60-62-64 (67-70) cm.

Sleeves: Cast on 48-50-50 (52-52) sts on smaller double pointed needles with color A; join and place a marker at the join. Knit rib as follows: 1 row color A, change to MC and knit until the rib measures 5 cm. Change to larger double pointed needles and knit Pattern 1 [Pattern 7-Pattern 1], increasing 10-10-10 (8-10) sts evenly distributed on the 1st row = 58-60-60 (60-62) sts. After the rib, inc 1 st each side of marker 30-29-32 (32-33) times:
Women's S + M: every 4th row
Women's L: alternately every 3rd and 4th row
Men's S/M + M/L: every 4th row
= 118-118-124 (124-128) sts. After Pattern 1 [Pattern 7-Pattern 1] is complete, knit Pattern 2 once (see that you center the pattern on the sleeve), then repeat Pattern 3 to finished dimensions. When the work measures 49-49-48 (54-54) cm, knit 2 cm reverse stockinette stitch for a seam allowance over the cut edge on the body, bind off.

Assembly:
Sweater with zipper: Sew a marker thread in the center of the steek sts on either side. Sew two machine seams around the marker thread, 1st seam = 1/2 stitch from the marker thread, 2nd seam = 1/2 stitch from first seam. Cut steeks for armholes. Sew shoulder seams. Pick up approximately 40 sts along the left side of the split on the front on smaller needles with MC [color A - MC] inside the 1st stitch and knit 2 rows stockinette stitch, bind off. Repeat along the right side of the split. Sew the split together at the bottom from the right side. Pick up approximately 100-110 sts around the neck and over the split from the center front on smaller needles with MC [color A - MC] and knit 2 cm stockinette stitch, change to color A [MC - color A] and knit 1 row stockinette stitch, purl 1 row (for the folding edge), change back to MC [color A - MC] and knit 2 cm stockinette stitch, bind off. Fold the edge over against the wrong side and sew.
Sew the sleeves to the body from the right side as follows: Sew alternately a stitch in the last row on the sleeve before the seam allowance and a stitch on the body after the machine seam. Turn the sweater inside out and sew the seam allowance from the sleeve over the cut edge on the body by hand. Sew on the zipper.

Sweater with round neck: Sew a marker thread in the center of the steek sts on either side. Sew two machine seams around the marker thread, 1st seam = 1/2 stitch from the marker thread, 2nd seam = 1/2 stitch from first seam. Cut steeks for armholes. Sew shoulder seams. Pick up approximately 100-110 sts around the neck on smaller double-pointed needles with MC [color A - MC]; join and knit 2.5 cm stockinette stitch, change to color A [MC - color A] and knit 1 row stockinette stitch, purl 1 row (for the folding edge), change back to MC [color A - MC] and knit 2 cm stockinette stitch, bind off. Fold the edge over against the wrong side and sew.
Sew the sleeves to the body from the right side as follows: Sew alternately a stitch in the last row on the sleeve before the seam allowance and a stitch on the body after the machine seam. Turn the sweater inside out and sew the seam allowance from the sleeve over the cut edge on the body by hand.

Diagram

symbols = Alt 1: bluegreen, Alt 2: off white, Alt 3: wine red
symbols = Alt 1: lt brown, Alt 2: bluegreen, Alt 3: lt brown
symbols = Alt 1: mustard, Alt 2: wine red, Alt 3: light olive
symbols = Alt 1: wine red, Alt 2: dark olive, Alt 3: bluegreen
symbols = Alt 1: light olive, Alt 2: light olive, Alt 3: mustard
symbols = M.4a+M.4b
diagram
diagram
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 52-11

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (17)

country flag Lesley Simpson wrote:

I have started knitting the pattern and have worked up to the part where the front is knitted patterns M3 (39stchs), M4, M3(39stchs). The instructions then state 'Repeat over the back'. There are no photographs of the back of the sweater. Is the neck pattern repeated around the back or is the back just made up of the diamond shapes? Thank you.

09.08.2022 - 23:47

DROPS Design answered:

Dear Mrs Simpson, back and front pieces will be worked the same way, starting on the side of the jumper work (39 sts M.3, the 54 sts M.4 and 39 sts M.3 = 132 sts), front piece is now worked, repeat the same pattern over back piece (=39 sts M.3, 54 sts M.4 and 39 sts M.3 = 132 sts). So that you will continue M.3 as before over the first 39 sts on the round, and over the 39 sts before 2nd marker + 39 sts after 2nd marker and over the last 39 sts on the round. And work M.4 on mid front + on mid back. Happy knitting!

10.08.2022 - 09:08

country flag Lesley Simpson wrote:

I have found DROPs Puna is an alpaca wool in the same yarn group as Karisma. There are not, however, as many colour choices. Is it possible to mix the yarns, using a base of Puna and colour pattern of Karisma wool?

11.03.2022 - 18:49

DROPS Design answered:

Dear Lesley, although they belong to the same group, Karisma is a bit thicker and less soft, since it's pure wool. So there will be a noticeable difference in the texture of the garment, if you work with both yarns. Happy knitting!

13.03.2022 - 22:45

country flag Lesley Simpson wrote:

I would like to have a go at knitting this pattern with Drops Alpaca. Is this possible and how do I calculate how much wool I need? Would it be less chunky? Thank you

28.01.2022 - 18:02

DROPS Design answered:

Dear Lesley, you can't apply this pattern for Alpaca, because it's made for Karisma, of a different yarn group. In any case, you would need 1 ball of each of the different colors and from 250 gr of the main color (depending on the size), but the jumper would be too thin. Happy knitting!

31.01.2022 - 00:11

country flag BillyIsoft wrote:

Ciągnik Ursus C330 Zamiar budowie elektrycznej Zetor 72- spisany w Armatura elektryczna: Macham chce zarys instalacji elektrycznej w kabinie BK Zamiar armatur elektrycznej Zetor 8111. Czasami aktualny, p t ę ż n i ekspansja, którą przezornie moglibyśmy kupić bez wyciągania twórczego związku w o

05.08.2019 - 14:53

country flag Helene Anker Knudsen wrote:

Jeg er i gang med at strikke damestørrelse Medium. Jeg har strikket M2 og M3 i størrelse Medium og er startet ved pilen M+S/M. Nu er mit spørgsmål: Hvor skal jeg starte, når jeg skal strikke M5 og M4? Jeg er startet ved M+S/M, men kan ikke få det til at passe. Desuden når jeg skal strikke ærmer, hvor skal jeg så starte ved M2 og M3?

24.05.2018 - 11:02

DROPS Design answered:

Hej Helene, du starter i siden og strikker M.3 så det passer over M.2 til arb måler ca 24 cm (hel rapport i højden). Nu fortsætter du med M.3 men strikker M.4 over de midterste masker på forstykket, så mønsteret fortsat passer. God fornøjelse!

29.05.2018 - 14:08

country flag Mario 105 wrote:

What color yarns was used on the man sweater. Can't tell if is the Alt #1 or Alt # 2. If along with the yarn you list the color numbers it would be much easy to see the color combinations.

22.07.2017 - 21:13

DROPS Design answered:

Dear Mario, the pattern you are asking about is an older one, and the colors slightly changed since, and so did the way the patterns are written. The newer patterns do list the colors with the actual numbers. Also, this pattern was designed to suit several color combination. If I would do the man's sweater in a color combo similar to the one on the picture, from the currently available colors, I would use a dark blue for the base (Karisma 17 or 37), a light grey for the contrast color (Karisma 72), and a dark mustard or orange (52 or 11). I hope this helps. Happy knitting!

23.07.2017 - 10:47

country flag Barbara wrote:

Ich habe die 5 Hilfsmaschen für die Ärmelausschnitte in einem anderen, gleichmäßige Muster gestrickt, das erleichtert das Mitführen des 2. Fadens und das spätere Nähen, ich brauchte keinen Markierungsfaden mehr durchzuziehen. Vielen Dank für die vielen tollen Anleitungen!

30.05.2016 - 15:16

country flag Barbara wrote:

Dann hatte ich Schwierigkeiten, die Musterangabe zu interpretieren. M1 oder (M7-M1)? Wann wird was gestrickt? Ich habe nur M1 genommen, leider, M7 wurde m.E. im Musterpulli gestrickt. Dort ist mehr rot drin, in M1 mehr weiß. Vom Muster her sind sie identisch. Also: wann wird nur M1 gestrickt, wann (M7-M1)? Die Angabe fehlt m.E. in der Anleitung.

30.05.2016 - 15:16

country flag Barbara wrote:

Beim Bestellen der Wolle habe ich leider feststellen müssen, dass Nr. 47 von Karisma nicht dunkeloliv, sondern tannengrün ist. Geht zusammen gar nicht! Bitte die Nr. ändern.

30.05.2016 - 15:15

country flag Anita Nordberg wrote:

Har kommit på vart jag gjorde fel,,,, mönstret stämde inte när jag la ihop mönstret på papper sida vid sida ,,,men det va "rutorna" som inte var lika stora....så där hade jag ju felet.:)...så nu ska det flyta bra.

29.07.2015 - 00:28