DROPS Soft Tweed
DROPS Soft Tweed
50% Wool, 25% Alpaca, 25% Viscose
from 5.80 $ /50g
Get the yarn to make this pattern from 52.20$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Rain Sky

Knitted sweater for men in DROPS Soft Tweed. The piece is worked top down, with raglan and double neck. Sizes S - XXXL.

DROPS 224-11
DROPS Design: Pattern no st-010
Yarn group B
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL – XXXL


Finished measurements:
Chest measurements: 96-104-112-122-132-146 cm = 37 3/4"-41"-44"-48"-52"-57 3/8"
Full length: 62-64-66-68-70-72 cm = 24 3/8"-25 1/4"-26"-26 3/4"-27 1/2"-28 3/8"
All measurements in charts are in cm.

MATERIALS:
DROPS SOFT TWEED from Garnstudio (belongs to yarn group B)
450-450-500-550-600-650 g color 06, pebbles

DROPS CIRCULAR NEEDLE SIZE 4 MM = US 6: Length 40 cm = 16” and 60-60-60-80-80-80 cm = 24”-24”-24”-32”-32”-32”.
DROPS CIRCULAR NEEDLE SIZE 3 MM = US 2.5: Length 40 cm = 16” and 60-60-60-80-80-80 cm = 24”-24”-24”-32”-32”-32”.
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM = US 6.
DROPS DOUBLE POINTED NEEDLES SIZE 3 MM = US 2.5.
The technique MAGIC LOOP can be used – you then only need circular needle of 80 cm = 32” in each size.

KNITTING GAUGE:
21 stitches in width and 28 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4”.
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Soft Tweed
DROPS Soft Tweed
50% Wool, 25% Alpaca, 25% Viscose
from 5.80 $ /50g
Get the yarn to make this pattern from 52.20$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

INCREASE TIP (evenly spaced):
To work out how to increase evenly, count the total number of stitches on the needle (e.g. 108 stitches) and divide by the number of increases to be made (e.g. 24) = 4.5.
In this example, increase by making 1 yarn over after alternately each 4th and 5th stitch. On the next round work the yarn overs twisted to avoid holes.

RAGLAN:
Increase 1 stitch on each side of all marker threads (= 8 stitches increased on the round) as follows: Work until there is 1 stitch left before the marker thread, make 1 yarn over, knit 2 (= marker thread sits between these 2 stitches), 1 yarn over. On the next round knit the yarn overs twisted to avoid holes. Then work the new stitches in stockinette stitch.

DECREASE TIP (sleeves):
Decrease 1 stitch on either side of the marker thread as follows: Work until there are 3 stitches left before the marker thread, knit 2 together, knit 2 (marker thread sits between these 2 stitches), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch (2 stitches decreased).

BINDING-OFF TIP:
To avoid the bind-off edge being tight you can bind off with a larger size needle. If the edge is still tight, make 1 yarn over after approx. each 4th stitch at the same time as binding off; the yarn overs are bind off as normal stitches.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

SWEATER – SHORT OVERVIEW OF THE PIECE:
The neck and yoke are worked in the round with circular needle, from mid back and top down. The yoke is divided for body and sleeves and the body is continued in the round with circular needle. The sleeves are worked with short circular needle/double pointed needles, top down.

DOUBLE NECK:
Cast on 135-140-145-150-155-165 stitches with circular needle size 3 MM = US 2.5 and DROPS Soft Tweed. Work rib in the round (knit 2, purl 3) for 4 cm = 1 1/2". Decrease all purl-3 to purl-2 = 108-112-116-120-124-132 stitches. Continue this rib until the neck measures 13 cm = 5 1/8".
Knit 1 round where you increase 24-28-24-36-40-56 stitches evenly spaced – read INCREASE TIP = 132-140-140-156-164-188 stitches. Knit 1 round.

YOKE:
Change to circular needle size 4 MM = US 6. Insert 1 marker at the beginning of the round (mid-back); the yoke is measured from this marker!
Insert 4 marker threads (without working the stitches) as follows: Skip 23-25-25-29-31-37 stitches, insert a marker thread here (= transition between back piece and sleeve), skip 20 stitches, insert a marker thread here (= transition between sleeve and front piece), skip 46-50-50-58-62-74 stitches, insert a marker thread here (= transition between front piece and sleeve), skip 20 stitches, insert a marker thread here (= transition between sleeve and back piece), there are 23-25-25-29-31-37 stitches left after the last marker thread. REMEMBER THE KNITTING GAUGE!
Work stockinette stitch. AT THE SAME TIME on the first round start to increase to RAGLAN – read description above. Increase like this every 2nd round a total of 23-26-30-30-33-35 times = 316-348-380-396-428-468 stitches.
When all the increases are finished, continue with stockinette stitch until the piece measures 19-21-23-25-27-29 cm = 7 1/2"-8 1/4"-9"-9 3/4"-10 5/8"-11 3/8" from the marker on the neck.
Now divide for the body and sleeves on the next round as follows:
Work the first 46-51-55-59-64-72 stitches (= half back piece), place the next 66-72-80-80-86-90 stitches on a thread for the sleeve, cast on 8-8-8-10-10-10 stitches (= in side under sleeve), work 92-102-110-118-128-144 stitches (= front piece), place the next 66-72-80-80-86-90 stitches on a thread for the sleeve, cast on 8-8-8-10-10-10 stitches (= in side under sleeve), work the last 46-51-55-59-64-72 stitches (= half back piece).
The body and sleeves are finished separately. THE PIECE IS NOW MEASURED FROM HERE.

BODY:
= 200-220-236-256-276-308 stitches. Insert 1 marker thread in the middle of the cast-on stitches under each sleeve (= 4-4-4-5-5-5 new stitches on each side of the thread).
Allow the threads to follow your work onwards; they are used when decreasing in the sides.
Continue with stockinette stitch in the round for 5 cm = 2". Now decrease 1 stitch on each side of both marker threads – read DECREASE TIP. Decrease like this every 9 cm = 3 1/2" a total of 4 times in all sizes = 184-204-220-240-260-292 stitches. Continue working until the piece measures 33 cm = 13" from the division; try the sweater on and work to desired length (approx. 5 cm = 2" left to finished length).
Knit 1 round where you increase 16-16-20-24-24-24 stitches evenly spaced = 200-220-240-264-284-316 stitches.
Change to circular needle size 3 MM = US 2.5 and work rib (knit 2, purl 2) for 5 cm = 2". Bind off with knit over knit and purl over purl – read BINDING-OFF TIP. The sweater measures approx. 62-64-66-68-70-72 cm = 24 3/8"-25 1/4"-26"-26 3/4"-27 1/2"-28 3/8" from the shoulder down.

SLEEVES:
Place the 66-72-80-80-86-90 stitches from the thread on the one side of the piece on short circular needle/double pointed needles size 4 MM = US 6 and knit up 1 stitch in each of the 8-8-8-10-10-10 stitches cast on under the sleeve = 74-80-88-90-96-100 stitches. Insert a marker thread in the middle of new stitches under the sleeve. Allow the thread to follow your work onwards; it will be used when decreasing under the sleeve.
Continue with stockinette stitch in the round for 5 cm = 2". Now decrease 1 stitch on each side of the marker thread – remember DECREASE TIP. Decrease like this every 3½-3-2-2-2-1½ cm = 1 1/4"-1 1/8"-3/4"-3/4"-3/4"-1/2" a total of 10-12-15-15-16-17 times = 54-56-58-60-64-66 stitches. Continue working until the sleeve measures 44-42-41-39-38-36 cm = 17 1/4"-16 1/2"-16 1/8"-15 1/4"-15"-14 1/4" from the division. Knit 1 round where you increase 6-8-6-8-8-6 stitches evenly spaced = 60-64-64-68-72-72 stitches. Change to double pointed needles size 3 MM = US 2.5 and work rib (knit 2, purl 2) for 5 cm = 2". Bind off with knit over knit and purl over purl – remember BINDING-OFF TIP. The sleeve measures approx. 49-47-46-44-43-41 cm = 19 1/4"-18 1/2"-18"-17 1/4"-17"-16 1/8" from the division.
Work the other sleeve in the same way.

ASSEMBLY:
Fold the neck double to the inside and sew down. To avoid the neck being tight and rolling outwards, it is important that the seam is elastic.

Diagram

All measurements in charts are in cm.

diagram measurements

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Rain Sky

Cora, Germany

Rain Sky

Sylwia, Norway

Post a comment to pattern DROPS 224-11

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (15)

country flag Michel wrote:

Guten Tag Meine Maschenprobe hat vier Maschen weniger auf 10 cm, ich möchte aber nicht die Nadelnstärke wechseln. Muss ich dann die grössere Grösse anstricken? Danke für ihre Antwort

13.11.2023 - 11:01

DROPS Design answered:

Lieber Michel, wenn Sie die richtige Maschenprobe nicht haben, dann sollen Sie die ganze Anleitung nach Ihrer eigenen Maschenprobe umrechnen, damit alle fertigen Maßen stimmen - am besten versuchen Sie Ihre Maschenprobe zu waschen/spannen oder mit grösseren Nadeln, so stimmen am besten die Breite sowie die Höhe. Viel Spaß beim stricken!

13.11.2023 - 16:10

country flag Jitske wrote:

Hallo, ik ben deze trui aan 't breien. Voor het lijf moet er om de 9 cm 4maal geminderderd worden en daarna doorbreien tot 33 cm vanaf het armsgat. Bij 4x9 cm is het bij mij toch echt al 36 cm. Is dit een vergissing of reken ik vanaf het verkeerde punt? Bij voorbaat dank!

03.11.2023 - 21:20

DROPS Design answered:

Dag Jitske,

Als je aan het begin en aan het eind mindert en daar 2 keer tussenin, dan heb je 3 stukjes van 9 cm en kom je op 27 cm in totaal.

05.11.2023 - 18:54

country flag Maria Cristina wrote:

Scusate, non avevo inserito gli aumenti sotto la manica 10 + 10 . 236+20=256 Grazie

29.10.2023 - 17:55

country flag Maria Cristina wrote:

Scusate, non avevo inserito gli aumenti sotto la manica 10 + 10 . 236+20=256 Grazie

29.10.2023 - 17:54

country flag Maria Cristina wrote:

Buonasera, sto lavorando la taglia XL e ho riscontrato che nel CORPO non si parte da 256 maglie, bensì 236, che scaturiscono dalla somma di 118(davanti)+118(dietro). È corretto?

28.10.2023 - 23:26

country flag Tahlia wrote:

Hi, I am knitting this sweater and I have completed the neck and the yoke, am currently knitting the body of the sweater and was wondering when and how do I connect the back of the sweater up, so it isn't open??

10.08.2023 - 06:38

DROPS Design answered:

Dear Tahlia, in this lesson we show how to work a jumper top down, from picture 9) we show how to divide yoke for sleeves and body and then on picture 16) we continue body in the round. Hope it can help. Happy knitting!

10.08.2023 - 09:39

country flag Maja wrote:

Jeg vil gerne spørge om rullekraven, som skal sys, så den brede del (2 r, 3 vr) kommer inderst. Er det ikke den yderste del som plejer at være bredere for at skabe volumen?

30.03.2023 - 10:18

DROPS Design answered:

Hej Maja, det er for at den ikke skal blive for stram når du syr. Du må gerne sy den på ydersiden hvis du hellere vil det :)

13.04.2023 - 10:03

country flag Ulla Nieminen wrote:

Oletteko varmoja lankajuoksusta? Minulla on normaali käsiala ja se antaa 18 silmukkaa kymmeneen senttiin.

14.03.2023 - 11:38

DROPS Design answered:

Hei, ohjeessa annettu neuletiheys on sama kuin DROPS Soft Tweed -langan vyötteessä annettu neuletiheys. Eli sinun kannattaa vaihtaa ohuempiin puikkoihin.

20.03.2023 - 16:51

country flag Lopez wrote:

Bonjour, Est-ce normal d'avoir des fronces après avoir tricoté les augmentations du yok ? Merci pour votre réponse.

26.01.2023 - 21:02

DROPS Design answered:

Bonjour Mme Lopez, vous n'êtes à priori pas censée avoir de fronces lorsque vous augmentez pour le raglan - cette vidéo montre comment faire ce type d'augmentations, elle pourra peut-être vous aider à identifier la raison des fronces. Bon tricot!

27.01.2023 - 08:41

country flag Julita wrote:

Dzień dobry, czy sweter wydziergany z samej Soft Tweed, bez dodania nici lub Kid silk, nie będzie się rwał? Włóczka sama w sobie bardzo łatwo się rwie? Jaki to będzie miało wpływ na gotową dzianinę i jej wytrzymałość?

24.10.2022 - 10:55

DROPS Design answered:

Witaj Julito, Soft Tweed jest bardzo mocną włóczką. Dodatek Kid-Silka wpływa na na jego puszystość. I bez Kid-Silka dzianina będzie trzymała kształt. Jeśli planujesz wykonać sweter tylko z Soft Tweed, koniecznie zrób próbkę, dobierając druty tak, aby twoja próbka była zgodna z tą we wzorze, a jeśli jest mniejsza, wybierz większy rozmiar swetra. Pozdrawiamy!

24.10.2022 - 15:28