DROPS Karisma
DROPS Karisma
100% Wool
from 2.30 £ /50g
Get the yarn to make this pattern from 9.20£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Dancing Elves

Knitted socks for children and adults in DROPS Karisma. Socks are worked with pattern with Santa Claus, stripes and hearts. Size 32 - 43. Theme: Christmas

DROPS Extra 0-722
DROPS design: Pattern no U-614
---------------------------------------------------------
Size: 32/34 - 35/37 - 38/40 - 41/43
Foot length: 20 - 22 - 24 - 27 cm
Sock height: approx 27 - 28 - 29 - 30 cm

Materials: DROPS KARISMA SUPERWASH from Garnstudio
50-100-100-100 g colour no 44, light grey
50-50-100-100 g colour no 16, dark grey
50-50-100-100 g colour no 18, red
50-50-50-50 g colour no 01, off-white

DROPS DOUBLE POINTED NEEDLES size 3.5 mm - or size needed to get 22 sts x 30 rows in stocking st = 10 x 10 cm.

DROPS DOUBLE POINTED NEEDLES size 3 mm – for rib.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Karisma
DROPS Karisma
100% Wool
from 2.30 £ /50g
Get the yarn to make this pattern from 9.20£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
PATTERN: See diagram M.1 and M.2. The entire pattern is worked in stocking st.

HEEL DECREASES:
Row 1 (= RS): Work row until 9-9-9-11 sts remain, slip next st as if to K, K1, psso, turn piece.
Row 2 (= WS): Work row until 9-9-9-11 sts remain, slip next st as if to P, P1, psso, turn piece.
Row 3 (= RS): Work row until 8-8-8-10 sts remain, slip next st as if to K, K1, psso, turn piece.
Row 4 (= WS): Work row until 8-8-8-10 sts remain, slip next st as if to P, P1, psso, turn piece.
Continue dec like this with 1 less st remaining on row before you turn until there are 8-8-10-10 sts on needle.

--------------------------------------------------------

SOCK:
Worked in the round on double pointed needles from the top down. Cast on 52-52-56-64 sts on double pointed needles size 3 mm with red. K 1 round and continue in rib, P2/K2. When rib measures 4-5-5-6 cm K 1 round, AT THE SAME TIME dec 4-4-8-4 sts evenly = 48-48-48-60 sts. Change to double pointed needles size 3.5 mm. K 1 round with red and now work M.1 on all sts (= 4-4-4-5 repeats across the round). After 1 vertical repeat of M.1 keep the first 12-12-13-15 sts on needle, slip the next 24-24-22-30 sts on a stitch holder (= mid upper foot) and keep the last 12-12-13-15 sts on needle = 24-24-26-30 sts for heel. Work stocking st back and forth on needle on heel sts with dark grey for 4.5-5-5.5-6 cm. Insert a marker. Now work HEEL DECREASES – see above! After heel dec pick up 10-10-12-10 sts with dark grey each side of heel and slip the 24-24-22-30 sts from stitch holder back on needle = 52-52-56-60 sts.
Insert a marker each side of the 24-24-24-32 sts mid upper foot.
Continue in the round in stocking st and M.2. AT THE SAME TIME dec each side of heel as follows: K tog the first 2 sts after the 24-24-24-32 sts on upper foot and K tog into back of loop the last 2 sts before the 24-24-24-32 sts on upper foot. Repeat the dec on every other round a total of 4 times = 44-44-48-52 sts. When piece measures approx 16-18-20-22 cm from marker on heel (= approx 4-4-4-5 cm remain, after 3 rounds with light grey) K 1 round in dark grey on all sts.
Now insert 1 marker each side with 22-22-24-26 sts on upper foot and under foot. Continue in the round in dark grey stocking st on all sts. AT THE SAME TIME dec for toes on each side of both markers as follows, beg 3 sts before marker: K2 tog, K2 (marker sits between these 2 sts), K2 tog into back of loop. Repeat the dec on every other round a total of 3-3-3-4 times and then on every round a total of 6-6-7-7 times = 8 sts left on needle. Cut the thread, pull it through remaining sts, tighten and fasten.
Stitch two small vertical stitches with dark grey for eyes on each of the gnomes in the pattern.

This pattern has been corrected.

Updated online: 20.09.2013
New amounts: 50-100-100-100 g colour no 44 light grey,
50-50-100-100 g colour no 16 dark grey,
50-50-100-100 g colour no 18 red,
50-50-50-50 g colour no 01 off-white.

Diagram

symbols = red
symbols = dark grey
symbols = light grey
symbols = off-white
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Dancing Elves

Dorota, Poland

Elf Hat

Val, United States

Dancing Elves

BUHIBUHI, Japan

Dancing Elves

Sabine, Germany

Tonttusukat

Sannamari, Finland

Post a comment to pattern DROPS Extra 0-722

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (8)

country flag Lienka wrote:

Dobrý deň, chcem sa spýtať ako postupovať v prípade zmeny priadze Karisma na Fabel. Skúšala som prevodník ale tam mi Fabel neukáže. Prípadne koľko očiek by bolo treba nahodiť naviac pre konkrétne veľkosti. Poprosím vás o odpoveď. Ďakujem.

17.07.2023 - 06:27

country flag Minna Jokinen wrote:

Hei, teen sukkia isoimmassa koossa ja mielestäni kantapäänohjeessa on väärä määrä silmukoita nostettavaksi kantapään reunasta. Silmukoita pitäisi ohjeen mukaan nostaa 10, vaikka mieleatäni oikea määrä olisi 15 silmukkaa 😊👍

16.12.2022 - 10:03

country flag Grace Ward wrote:

Love this pattern!

06.10.2019 - 02:45

country flag Annette wrote:

Hei! Jeg strikker disse i størrelse 37/39. Tenker også å strikke i str 32/34. Hva gjør jeg da - siden maskeantallet etter vrangbord uansett blir 48 masker?? Jeg er amatør:)

29.10.2018 - 14:39

DROPS Design answered:

Hei Annette, Begge størrelsene har samme antall masker til å begynne med, men lengden av skaftet og foten blir forskjellig. God fornøyelse!

30.10.2018 - 07:52

country flag BETTY wrote:

I did not see the chart for the Santa. Is there a link?

15.06.2015 - 01:51

DROPS Design answered:

Dear Betty, you will find the diagram for the Santas at the very bottom of the page (diagram M.1). Happy knitting!

15.06.2015 - 10:48

Irina Lapko wrote:

Hello, I'm thinking of ordering Karisma yarn for these socks. Just looking at the photo, I see that there is an error in yarn. It should be 100g for light grey and 50g for dark. Regards, Irina

18.09.2013 - 08:02

country flag Anita wrote:

Hejsan! Är novis om detta m mönsterstickning, men jag tänkte göra ett försök m dessa. Men när jag ser på mönstret så visas det upponer tycker jag! Tänker jag fel elle?

05.12.2012 - 10:57

DROPS Design answered:

Du börjar sticka nederst i diagrammet från höger mot vänster. Det är då samma som överst på skaftet och ner mot foten. Se även vår video om mönsterstickning. Lycka till!

05.12.2012 - 14:16

country flag Garnnetto wrote:

Har stickat ett par i storlek 38-40, och det räckte med ett nystan av varje färg - det ljusgrå, som enl mönstret ska gå åt ett nystan gick verkligen hela nystanet åt, ca 1 dm kvar. Det röda och det mörkgrå, som ska gå åt två nystan av varje hade jag ca 10 gram kvar på varje nystan. Fler som har samma erfarenhet?

14.11.2011 - 08:53