DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 2.45 £ /50g
Get the yarn to make this pattern from 17.15£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS AW2425

Narvik Set

The set consists of: Men’s knitted hat and neck warmer with multi-coloured Nordic pattern. The set is worked in DROPS Merino Extra Fine.

DROPS 185-7 DROPS Design: Pattern no me-125
Yarn group B
-----------------------------------------------------------
For the whole set there will be enough with approx. 200 g colour 05, light grey, 100 g colour 01, off white and 50 g colour 11, red (for all sizes).
-----------------------------------------------------------
HAT:
Sizes: S/M - L/XL
Fits head size: approx. 57/59 - 59/61 cm
Materials:
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
100-100 g colour 05, light grey
50-50 g colour 01, off white
50-50 g colour 11, red

The piece can also be knitted with yarn from:
"Alternative yarn (Yarn group B)" – see link below.

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 cm) SIZE 3.5 MM – or the size needed to get 22 stitches and 30 rows stocking stitch on 10 cm in width and 10 cm in height.

DROPS CIRCULAR NEEDLE (40 cm) SIZE 3 MM - for rib.
-----------------------------------------------------------

NECK WARMER:
Sizes: S/M - M/L - L/XL
MEASUREMENTS: Circumference at top: 50-53-57 cm. Height: 26-28-30 cm.
Materials:
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
100 g for all sizes in colour 05, light grey
50 g for all sizes in colour 01, off white

The piece can also be knitted with yarn from:
"Alternative yarn (Yarn group B)" – see link below.

DROPS CIRCULAR NEEDLE (40 cm) SIZE 4 MM – or the size needed to get 21 stitches and 28 rows stocking stitch on 10 cm in width and 10 cm in height.

DROPS CIRCULAR NEEDLE (40 cm) SIZE 3 MM – for rib.
-----------------------------------------------------------

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

You might also like...

DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 2.45 £ /50g
Get the yarn to make this pattern from 17.15£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. Convert from cm to inches here. There are different terms for crocheting in British and American English. If this pattern includes crochet, convert "crochet terms" here. See this pattern in American English here..
INFORMATION FOR THE PATTERN:

RIDGE/GARTER STITCH (worked back and forth):
1 ridge = Knit 2 rows.

RIDGE/GARTER STITCH (worked in the round):
1 ridge = 2 rounds. Knit 1 round and purl 1 round.

DECREASE/INCREASE TIP:
To work out how to decrease/increase evenly, count the total number of stitches on needle (e.g. 114 stitches) and divide by the number of decreases/increases to be made (e.g. 2) = 57.
In this example, knit together approx. every 56th and 57th stitch when decreasing. When increasing make 1 yarn over after approx. every 57th stitch, on the next round/row work the yarn overs twisted to avoid holes.

PATTERN:
Hat: See diagrams A.1 and A.2.
Neck warmer: See diagrams A.3 and A.4.
The whole pattern is worked in stocking stitch.
----------------------------------------------------------

HAT:
The piece is worked in the round with circular needle, bottom up. Change to double pointed needles when necessary.
Cast on 114-123 stitches with circular needle size 3 mm and red. Knit 1 round. Then work rib (= knit 1 / purl 2) for 2 cm. Knit 1 round where you decrease 2-3 stitches evenly on round – read DECREASE/INCREASE TIP = 112-120 stitches. Change to circular needle size 3.5 mm and work pattern A.1 (= 28-30 repeats of 4 stitches). REMEMBER THE KNITTING TENSION! On the last round of A.1 increase 2-0 stitches evenly on round = 114-120 stitches. Continue by working A.2 in the round (= 19-20 repeats of 6 stitches). When A.2 has been completed, the piece measures approx. 7 cm. Continue with stocking stitch and light grey. When the piece measures 18-20 cm decrease 2-0 stitches evenly on round = 112-120 stitches. Insert 8 marker threads in the piece with 14-15 stitches between each. On the next round decrease 1 stitch after each marker thread by knitting 2 stitches together (= 8 stitches decreased). Decrease in this way every 2nd round a total of 9 times = 40-48 stitches. On the next round knit all stitches together 2 and 2 = 20-24 stitches. Cut the strand, pull it through the remaining stitches, tighten and fasten well. The hat measures approx. 27-29 cm from the top down.
----------------------------------------------------------

NECK WARMER:
The piece is worked in the round with circular needle, top down until the upper part of the neck warmer is finished. The piece is then divided in the sides and the front and back pieces are worked back and forth separately with circular needle.
Cast on 111-117-126 stitches with circular needle size 3 mm and light grey. Knit 1 round. Then work rib (= knit 1 / purl 2) for 3 cm. Knit 1 round where you decrease 7-5-6 stitches evenly on round – read DECREASE/INCREASE TIP = 104-112-120 stitches. Change to circular needle size 4 mm and work A.3 (= 26-28-30 repeats of 4 stitches). REMEMBER THE KNITTING TENSION! On the last round of A.3 increase 4-2-0 stitches evenly on round = 108-114-120 stitches. Continue by working A.4 in the round (= 18-19-20 repeats of 6 stitches). When A.4 has been completed, continue with light grey to finished length. When the piece measures 10-11-12 cm insert 1 marker thread at the beginning of the round and 1 marker thread after 54-57-60 stitches (= 1 marker thread in each side). Now work 3 RIDGES – see description above, over 8 stitches in each side (the marker threads sit in the middle of these 8 stitches – the other stitches are worked in stocking stitch). When you have worked 3 ridges in height in each side, divide the piece by both markers and the front and back pieces are finished separately. THE PIECE IS NOW MEASURED FROM HERE!

BACK PIECE:
= 54-57-60 stitches. Work stocking stitch back and forth with 4 edge stitches in GARTER STITCH – see description above, in each side. When the piece measures 12-13-14 cm from the separation, purl 1 row from the wrong side where you increase 12 stitches evenly on row in all sizes (the 4 edge stitches in each side are continued in garter stitch; do not increase over these 4 stitches) = 66-69-72 stitches. Change to circular needle size 3 mm and work the next row as follows from the right side: 4 edge stitches in garter stitch, * knit 1, purl 2 *, repeat from *-* until there are 5 stitches left on the row, knit 1 and finish with 4 edge stitches in garter stitch (the yarn overs from the previous round are worked twisted to avoid holes). Continue rib in this way for 3 cm. Then cast off with garter stitch over garter stitch, knit over knit and purl over purl, but to avoid the cast off edge being tight, make 1 yarn over after every 6th stitch at the same time as you cast off (yarn overs cast off as normal stitches). The neck warmer measures approx. 26-28-30 cm from the cast on edge down.

FRONT PIECE:
= 54-57-60 stitches. Work in the same way as the back piece.

This pattern has been corrected.

Updated online: 17.09.2018
Corrections: HAT:100-100 g colour 05, light grey

Diagram

symbols = red
symbols = light grey
symbols = off white
symbols = decrease/increase round - see description in text!
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Post a comment to pattern DROPS 185-7

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (2)

country flag Emelie wrote:

Stämmer verkligen garnåtgången till mössan? Stickar den större storleken och garnet är nu slut precis när jag ska börja göra minskningarna (arb mäter 20 cm). Står att det ska gå åt 50 g till mössan och 100 till halsvärmaren men 200g om man stickar båda - hur går det ihop?

16.09.2018 - 21:35

DROPS Design answered:

Hei Emelie. Her ser det ut som det har skjedd en glipp. Det skal være 100 g grå til luen. Dette har nå blitt rettet i oppskriften, takk for beskjed og god fornøyelse.

17.09.2018 - 11:28

Petra Nyman wrote:

Hej! Det är ett fel i beskrivningen för halsvärmaren. Diagram A2 hör väl till mössan, A4 hör till halsvärmaren?

29.07.2018 - 09:37