DROPS Air
DROPS Air
65% Alpaca, 28% Polyamide, 7% Wool
from 6.45 $ /50g
Get the yarn to make this pattern from 51.60$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS AW2425

No Nonsense Cardigan

Knitted jacket in DROPS Air. The piece is worked top down with raglan and V-neck. Sizes S - XXXL.

Highlight Size:
DROPS 244-8

#nononsensecardigan

DROPS Design: Pattern ai-465
Yarn group C or A + A
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL – XXXL

Finished measurements:
Chest measurements: 102-110-116-128-140-152 cm = 40"-43⅜"-45¾"-50⅜"-55"-59¾"
Full length: 54-56-58-60-62-64 cm = 21¼"-22"-22¾"-23⅝"-24⅜"-25¼"
All measurements in charts are in cm.

YARN:
DROPS AIR from Garnstudio (belongs to yarn group C)
400-400-450-500-550-600 g color 19, forest green

BUTTONS:
DROPS BUTTONS NO. 537: 4 items in all sizes.

NEEDLES:
DROPS CIRCULAR NEEDLES SIZE 5 MM = US 8: Length 40 cm = 16" and 80 cm = 32".
DROPS CIRCULAR NEEDLES SIZE 4 MM = US 6: Length 80 cm = 32".
DROPS DOUBLE POINTED NEEDLES SIZE 5 MM = US 8.
DROPS DOUBLE POINTED NEEDLES SIZE 4 MM = US 6.
The technique MAGIC LOOP can be used – you then only need 80 cm = 32" circular needle in each size.

KNITTING GAUGE:
17 stitches in width and 22 rows in height with stockinette stitch = 10 x 10 cm = 4" x 4".
NOTE: Needle size is only a guide. If you get too many stitches on 10 cm = 4", change to a larger needle size. If you get too few stitches on 10 cm = 4", change to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

You might also like...

DROPS Air
DROPS Air
65% Alpaca, 28% Polyamide, 7% Wool
from 6.45 $ /50g
Get the yarn to make this pattern from 51.60$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. Convert from inches to cm here. There are different terms for crocheting in American and British English. If this pattern includes crochet, convert "crochet terms" here. See this pattern in British English here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:
-------------------------------------------------------

GARTER STITCH (worked back and forth):
Knit all rows.
1 ridge = knit 2 rows.

RAGLAN:
Increase 1 stitch before/after 2 stitches in each transition between the body and sleeves; the marker-thread sits between these 2 stitches. Increase 1 stitch by making 1 yarn over which is worked twisted on the next row/round to avoid a hole. The new stitches are then worked in stockinette stitch.

BUTTONHOLES:
Work buttonholes on the right band (when the garment is worn). Work from the right side when there are 4 stitches left on the row as follows: Make 1 yarn over, knit 2 together and knit 2. On the next row (wrong side), knit the yarn over to leave a hole.
The first buttonhole is worked 1 cm = ⅜" after the last increase for the V-neck, then the other 3 buttonholes with approx. 7-8-8½-7½-8-9 cm = 2¾"-3⅛"-3¼"-2⅞"-3⅛"-3½" between each one.

DECREASE TIP (for sleeves):
Start 3 stitches before the marker-thread, knit 2 together, knit 2 (marker-thread sits between these 2 stitches), slip 1 stitch knit-wise, knit 1 and pass the slipped stitch over the knitted stitch (2 stitches decreased).

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

JACKET – SHORT OVERVIEW OF THE PIECE:
Piece is worked back and forth, top down.
Start by working 2 loose bands in garter stitch. Stitches are cast on between the 2 bands for the shoulders and back neck and the yoke continued back and forth with circular needle from mid-front. Stitches are increased for raglan and the V-neck. The yoke is divided for the body and sleeves and the body continued back and forth with circular needle. The sleeves are worked in the round with short circular needle/double pointed needles.

RIGHT BAND (when the garment is worn):
Cast on 7 stitches with circular needle size 5 MM = US 8 and DROPS Air.
Work GARTER STITCH – read description above, until the band measures 17-17-17-19-19-19 cm = 6¾"-6¾"-6¾"-7½"-7½"-7½", finishing after a row from the wrong side. Lay the piece to one side.

LEFT BAND:
Cast on 7 stitches with circular needle size 5 MM = US 8 and DROPS Air.
Work garter stitch until the band measures 17-17-17-19-19-19 cm = 6¾"-6¾"-6¾"-7½"-7½"-7½", finishing after a row from the right side. Do not cut the strand.
Cast on 68-68-68-74-74-74 stitches at the end of this row, then knit the right band stitches = 82-82-82-88-88-88 stitches. Work 1 row with garter stitch over each band and purling the cast-on stitches.

Insert 4 marker-threads (used when increasing for RAGLAN – read explanation above), without working the stitches and inserting them between 2 stitches as follows:
Count 9 stitches, insert marker-thread 1, count 20 stitches, insert marker-thread 2, count 24-24-24-30-30-30 stitches, insert marker-thread 3, count 20 stitches, insert marker-thread 4, there are 9 stitches left on the row.

YOKE:
REMEMBER THE KNITTING GAUGE!
Continue back and forth with stockinette stitch and garter stitch over each band. At the same time increase for the V-neck and raglan as described below. Read the next 2 sections before continuing. Start mid-front, from the right side.

V-NECK:
Increase for the neck inside the bands every 4th row 11-11-11-14-14-14 times by making 1 yarn over, which is worked twisted on the next row to avoid a hole.
1 cm = ⅜" after the last increase for the neck begin working the BUTTONHOLES – read description above.

RAGLAN:
Increase on each side of 2 stockinette stitches in each transition between the front/back pieces and the sleeves every 2nd row (each row from the right side = 8 increased stitches) 6 times – read description above. Continue to increase for raglan every 2nd round but every 2nd increase is only on the front/back pieces (4 increased stitches), i.e., increase on the front/back pieces every 2nd row (each row from the right side) and on the sleeves every 4th row (every 2nd row from the right side). Increase like this 18-22-26-26-30-30 times on the body (9-11-13-13-15-15 times on the sleeves).

SIZES S, M, XL, XXL and XXXL (the increases in size L are finished):
Continue with stockinette stitch and increase for raglan but now only increase on the body every 2nd row (the sleeve increases are finished) 2-1-1-1-5 times.

ALL SIZES:
You have increased a total of 26-29-32-32-37-41 times on the body and 15-17-19-19-21-21 times on the sleeves.

After the last increase there are 268-288-308-324-348-364 stitches. Continue with stockinette stitch and the bands in garter stitch until the yoke measures 24-26-29-29-33-36 cm = 9½"-10¼"-11⅜"-11⅜"-13"-14¼", measured mid-back.

Divide for the body and sleeves as follows:
Work the first 46-49-52-56-60-64 stitches (front piece), place the next 50-54-58-58-62-62 stitches on a thread for the sleeve, cast on 10-10-10-12-14-16 stitches (in side under sleeve), work 76-82-88-96-104-112 stitches (back piece), place the next 50-54-58-58-62-62 stitches on a thread for the sleeve, cast on 10-10-10-12-14-16 stitches (in side under sleeve), work the last 46-49-52-56-60-64 stitches (front piece).

BODY:
= 188-200-212-232-252-272 stitches. Continue with stockinette stitch and the bands in garter stitch for a further 18-18-17-19-17-16 cm = 7"-7"-6¾"-7½"-6¾"-6¼". Knit 1 row from the right side and increase 19-21-21-23-25-27 stitches evenly spaced (do not increase over the bands) = 207-221-233-255-277-299 stitches.
Change to circular needle size 4 MM = US 6 and work as follows from the wrong side: 7 band stitches in garter stitch, * purl 1, knit 1 *, work from *-* until there are 8 stitches left, purl 1 and 7 band stitches in garter stitch. Continue this rib for 6 cm = 2⅜". Bind off. The jacket measures approx. 54-56-58-60-62-64 cm = 21¼"-22"-22¾"-23⅝"-24⅜"-25¼" from the shoulder.

SLEEVES:
Place the 50-54-58-58-62-62 stitches from the thread on the one side of the piece on short circular needle/double pointed needles size 5 MM = US 8 and knit up 1 stitch in each of the 10-10-10-12-14-16 stitches cast on under the sleeve = 60-64-68-70-76-78 stitches. Insert a marker-thread in the middle of the new stitches under the sleeve.
Work stockinette stitch in the round.
When the sleeve measures 4 cm = 1½", decrease 2 stitches under the sleeve – read DECREASE TIP. Decrease like this every 5-3½-2½-2½-2-1½ cm = 2"-1¼"-1"-1"-¾"-½" a total of 6-8-9-10-11-11 times = 48-48-50-50-54-56 stitches. Continue working until the sleeve measures 36-35-33-32-29-27 cm = 14¼"-13¾"-13"-12½"-11⅜"-10⅝" from the division. Knit 1 round and increase 8-8-10-10-10-12 stitches evenly spaced = 56-56-60-60-64-68 stitches. Change to double pointed needles size 4 MM = US 6 and work rib (knit 1, purl 1) for 6 cm = 2⅜". Bind off. The sleeve measures approx. 42-41-39-38-35-33 cm = 16½"-16⅛"-15¼"-15"-13¾"-13" from the division.
Work the other sleeve in the same way.

ASSEMBLY:
Sew the buttons onto the left band. Sew together the 2 loose bands mid-back and sew them to the neckline.

Diagram

All measurements in charts are in cm.

diagram measurements

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.  

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Post a comment to pattern DROPS 244-8

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (76)

country flag Paulina wrote:

Chciałabym zrobić ten sweter na włóczce Big Merino zamiast Air, jak liczyć potrzebną do zamówienia gramaturę? Widzę, że w takiej samej wadze motka Air jest dwa razy dłuższy i zastanawiam się, czy wobec tego zamówić dwa razy więcej Big Merino, niż podane we wzorze? Czy tak to działa? Będę wdzięczna za podpowiedź!

30.10.2024 - 10:27

DROPS Design answered:

Witaj Paulino, tak jest, np. na rozmiar S potrzeba 400 g włóczki Air albo 800 g włóczki Big Merino. Pozdrawiamy!

30.10.2024 - 14:02

country flag Miriam wrote:

Ik snap niet veel van uw beschrijving. Moet ik eerst 2 x 17 cm geribbelde voorbies breien? En waar blijven die dan? De hals is volgens de foto ook in ribbelsteek. Die zie ik niet terug in uw beschrijving. Tot nu toe lukte me het goed om jullie beschrijving te snappen, maar deze snap ik echt niet. Zou u me kunnen helpen met een iets meer uitgebreide beschrijving Alvast bedankt.

25.10.2024 - 09:03

country flag Susanne Frebel wrote:

Strickt man erst die Passe, dann den VAusschnitt und macht dann die Raglanzunahmen? Oder passiert das alles gleichzeitig?

14.10.2024 - 17:42

DROPS Design answered:

Liebe Frau Frebel, man strickt zuerst die beiden Blende dann strickt man die beiden zusammen mit neuen Maschen dazwischen dann strickt man die Passe gleichzeitig wird man für V-Ausschnitt und Raglan zunehmen. Viel Spaß beim Stricken!

15.10.2024 - 09:32

country flag Magda Bernaerts wrote:

U zegt dat voor de pas je elke tweede naald voor en na elke markeerdraad moet meerderen en dan nog eens gelijktijdig voor de V-hals maar als ik twee steken voor de markeerdraad voor de raglan meerder waar meerder ik dan voor de V-hals?

11.10.2024 - 13:11

DROPS Design answered:

Dag Magda,

Voor de hals meerder je op iedere 4e naald, vlak naast de biezen door 1 omslag te maken.

12.10.2024 - 09:03

country flag Catherine Léger wrote:

Bonjour Pour les manches vous avez oublié de préciser le nombre de centimètres entre chaque diminution. Il est impossible de faire pour la taille xl 19 centimètres pour la hauteur du corps. Il faut rajouter 10 centimètres sinon le pull arrive au nombril ! Merci pour tout vos modèles gratuits même si parfois les explications ne sont pas toujours claires mais on y arrive avec de la patience !

01.10.2024 - 22:21

DROPS Design answered:

Bonjour Mme Léger, en taille XL, on diminue pour les manches 10 fois tous les 2,5 cm. Le bas du gilet doit bien mesurer 19 cm + les 6 cm de côtes (25 cm au total) + l'empiècement (29 cm) + 6 cm d'épaule = 60 cm de hauteur totale, conformément aux mesures indiquées dans le schéma. Bon tricot!

02.10.2024 - 09:08

country flag Wenche Søgaard wrote:

På diagrammet ser det ut for meg som det står i str. L : 29 cm fra der fellingen begynner og ned til armhulen og 17 cm fra armhulen og ned til vrangborden selv om den siste avstanden ser mye lenger ut på tegningen?

11.09.2024 - 11:38

DROPS Design answered:

Hei Wenche. Husk at dette kun er en generell målskisse som visere målene på plagget, ikke hvordan plagget proposjonalt vil bli. Om du forholder deg til målene og overholder strikkefastheten vil plagget bli riktig. mvh DROPS Design

16.09.2024 - 08:12

country flag Wenche Søgaard wrote:

Siden spørsmålet jeg sendte først var synlig på denne siden men så forsvant prøver jeg igjen. Hvordan kan det stemme at de løse stolpene i størrelse L bare skal være 17 cm (34 cm til sammen) når det er lagt opp 68 masker mellom stolpene det de skal sys fast og strikkefastheten stemmer, 17 masker = 10 cm?

09.09.2024 - 12:08

DROPS Design answered:

Hei Wevhe. Se vårt svar på ditt forrige spørsmål :) mvh DROPS Design

09.09.2024 - 13:46

country flag Wenche Søgaard wrote:

Hvordan kan det stemme at stolpene i str L skal være bare 17 cm (dvs. 34 til sammen) når de skal festes til nakken? Mellom stolpene er det jo lagt opp 68 masker. Strikkefastheten stemmer, 17 masker = 10 cm.

09.09.2024 - 11:48

DROPS Design answered:

Hei Wenche. Når du skal feste stolpene (17+17 cm i riller = meget tøyelig) til halsen som er på 68 masker / 40 cm i glattstrikk, må du strekke litt i stolpen slik at det passer til halskanten ved sammensyingen. Stolpen vil da trekke halskanten noe sammen og vil da legge seg pent rundt nakken ved bruk. mvh DROPS Design

09.09.2024 - 13:44

country flag BryanZex wrote:

Scale up your account and get MORE! Regardless of your budget, we possess an amazing proffer for you! Deposit any amount up to $400 and get a BONUS of 100-120% of your deposit amount! Neck if you don't hold a overweight amount, you can even spread your entrust and enjoy more mirth while playing! Examine it absolute any longer and start playing with leftover funds in your account! Your winnings are waiting respecting you! https://shorturl.at/V1G8d

05.09.2024 - 01:41

country flag Sandra Anema wrote:

Als ik 7 (bies) optel met 74 (opgezette steken) dan kom ik niet op 88 steken

23.08.2024 - 15:00

DROPS Design answered:

Je hebt 7 voorbiessteken, dan zet je 74 steken op, dan brei je weer 7 voorbiessteken. Je komt dan op 7+74+7=88 steken.

28.08.2024 - 20:57