DROPS design: Pattern no bs-048
Yarn group A
Size: S - M - L - XL - XXL - XXXL
Bust: 88-96-102-116-128-140 cm / 34½”-37¾”-40”-45¾”-50½”-55”
Full length: 56-58-60-62-64-66 cm / 22''-22¾''-23 5/8''-24 3/8''-25¼''-26''
DROPS BABYALPACA SILK from Garnstudio
400-400-450-500-550-600 color no 6235, gray blue
DROPS CROCHET HOOK size 3.5 mm/E/4 – or size needed to get 22 dc in width x 10 rows vertically = 10 x 10 cm / 4'' x 4''.
1 repetition A.2 over 10 sts measures approx. 3½ cm / 1¼” in width.
DROPS MOTHER-OF-PEARL BUTTON NO 521: 7-7-7-8-8-8 pieces
Corrections made to this pattern (after publication)
YOKE (1 ch was missing 2 places inside parenthesis):... 18-18-20-20-22-22 sc, work A.1 over the next 5 sts (i.e. 1 dc in first sc, skip 1 sc, ch 1, 5 dc in next sc, skip 1 sc, ch 1 and 1 dc in next sc), work 1 dc in each of...
Updated online: 20.02.2014 (Printed catalogues do not include these corrections)
Have you seen all the new updates to the Tips & Help section? Here you will find not only new videos on a daily basis but also knitting & crochet lessons and lots of pattern inspiration for your next project!
And make sure to bookmark it! New content will be added every week!
NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inch - click here.
There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here.
Replace first dc at beg of every dc row with ch 3, finish row with 1 dc in 3rd ch from beg of previous row.
See diagrams A.1 to A.3.
Inc 1 dc by working 2 dc in same st.
DECREASE TIP 1:
Work 1 sc/tr but wait with last YO and pull through (= 2 sts on hook), then work next sc/tr but on last pull through, pull YO through all sts on hook = 1 sc/tr dec.
DECREASE TIP 2:
Work 1 sc but wait with last YO and pull through (= 2 sts on hook), work next sc but wait with last YO and pull through (= 3 sts on hook), work next sc but now pull last YO through all 4 sts on hook (= 2 sts dec).
The piece is worked top down. Worked back and forth from mid front.
Ch 166-166-176-176-187-187 on hook size 3.5 mm/US E/4 with BabyAlpaca Silk. Work first row as follows from WS: Work 1 sc in 2nd ch from hook, * skip ch 1, 1 sc in each of the next 3 ch *, repeat from *-* until 0-0-2-2-1-1 ch remains and finish with 1 sc in each of the last 0-0-2-2-1-1 ch = 124-124-132-132-140-140 sc (includes 4 sc in each side towards mid front for band).
READ CROCHET INFO and work next row as follows from RS: 3 ch (= 1dc), 1 dc in each of the next 18-18-20-20-22-22 sc, work A.1 over the next 5 sts (i.e. 1 dc in first sc, skip 1 sc, ch 1, 5 dc in next sc, skip 1 sc, ch 1 and 1 dc in next sc), work 1 dc in each of the next 18 sc (= sleeve), A.1 over the next 5 sc, 1 dc in each of the next 30-30-34-34-38-38 sc (= back piece), A.1 over the next 5 sc, 1 dc in each of the next 18 sc (= sleeve), A.1 over the next 5 sts and 1 dc in each of the last 19-19-21-21-23-23 sc, turn piece.
READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING AND REMEMBER THE CROCHET GAUGE!
Continue back and forth with dc and A.1 in every transition between body and sleeves. AT THE SAME TIME on next row (= WS) beg inc for raglan and inc as follows – NOTE: The inc on body and sleeves are uneven:
RAGLAN INC ON FRONT AND BACK PIECE:
Inc 2 dc before/after A.1 on front and back piece by working 2 dc in each of the last 2 dc before/after A.1 on front and back piece.
Repeat inc with 2 dc on every row 1-5-6-11-14-20 more times (= 2-6-7-12-15-21 times in total).
Then inc 1 dc before/after A.1 by working 2 dc in last dc before/after A.1 on front and back piece. Repeat inc with 1 dc on every row 19-16-16-12-10-5 more times (= 20-17-17-13-11-6 times in total).
RAGLAN INC ON SLEEVES:
Inc 2 dc before/after A.1 in each side on sleeves by working 2 dc in each of the last 2 dc before/after A.1 on sleeves.
Repeat inc with 2 dc on every row 13-14-15-16-18-19 more times (= 14-15-16-17-19-20 times in total).
Then inc 1 dc before/after A.1 by working 2 dc in last dc before/after A.1 on sleeves. Repeat inc with 1 dc on every row 7-7-7-7-6-6 more times (= 8-8-8-8-7-7 times in total).
TRANSITION FROM A.1 TO DC:
AT THE SAME TIME on last row with inc work 5 dc over A.1 instead of A.1 in every transition between body and sleeves.
After last inc, there are 364-392-416-448-484-520 dc on row.
Work next row as follows from RS (if next row is worked from WS, cut the yarn and beg from RS): Work 1 dc in each of the first 46-51-55-61-67-74 dc (= left front piece), skip the next 94-98-102-106-112-116 dc (= sleeve), work 12 ch, work 1 dc in each of the next 84-94-102-114-126-140 dc (= back piece), skip the next 94-98-102-106-112-116 dc (= sleeve), work 12 ch and work 1 dc in each of the last 46-51-55-61-67-74 dc = 200-220-236-260-284-312 sts on row.
Then finish body and sleeves separately.
Insert 1 marker on row – now measure piece from here.
Work first row as follows from WS: 3 ch (= 1dc), work 1 dc in each of the next 3 dc (= band), work 1 dc in every dc and 12 dc in ch-space under each sleeve until 4 dc remain on row AT THE SAME TIME inc 49-49-63-69-75-77 dc evenly over these sts, finish with 1 dc in each of the last 4 dc (= band) = 249-269-299-329-359-389 dc on row.
On next row from RS, work pattern according to diagram A.2 with 4 dc in each side for band, i.e. work 1st row as follows:
3 ch (= 1 dc), 1 dc in each of the first 3 dc (= band), 1 dc in next dc, * ch 1, skip 4 dc, 7 dc in next dc, ch 1, skip 4 dc, 1 dc in next dc *, repeat from *-* 24-26-29-32-35-38 times in total and finish with 1 dc in each of the last 4 dc on row. Continue pattern like this according to diagram A.2 (repeat rows 2-5 in diagram).
When piece measures approx. 28-29-30-31-32-33 cm / 11''-11 3/8''-11¾''-12¼''-12½''-13'' from marker – finish after 3rd or 5th row in pattern, cut the yarn (piece measures approx. 56-58-60-62-64-66 cm / 22''-22¾''-23 5/8''-24 3/8''-25¼''-26'' from shoulder and down).
= 94-98-102-106-112-116dc. Worked back and forth.
Insert 1 marker on row – now measure piece from here.
Work first row as follows from WS: ch 6 loosely, work 1 dc in every dc on sleeve and finish row with 8 ch, turn piece. Work 1 dc in 4th ch from hook, work 1 dc in each of the next ch 4, 1 dc in every dc from previous row and 1 dc in each of the 6 ch from beg of previous row = 106-110-114-118-124-128 dc on row. Work next row as follows from RS: 3 ch (= 1 dc), 1 dc in each of the next 6-8-5-7-5-7 dc, insert 1 marker, work pattern according to diagram A.2 over the next 91-91-101-101-111-111 sts, insert 1 marker and continue with 1 dc in each of the last 8-10-7-9-7-9 dc (1st row in A.2 has now been worked). Move the markers downwards when working.
READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING! Continue pattern like this back and forth AT THE SAME TIME work pattern between the 2 markers on the next rows as shown in A.3 (beg on 2nd row in diagram), i.e. replace 1 repetition of A.2 in each side between markers with dc (these dc are in addition to dc outside the markers. Use the markers to help with correct no of sts).
AT THE SAME TIME on 2nd row in A.2/A.3 dec 2 dc in each side by working the first 4 dc on row tog 2 by 2 and the last 4 dc on row tog 2 by 2 – READ DECREASE TIP 1. Repeat dec with 2 dc in each side on every row 3-5-3-6-4-6 more times (= 4-6-4-7-5-7 times in total). Then dec 1 dc in each side every 2nd-2nd-3rd-5th-4th-6th row a total of 8-6-7-3-5-3 times. After last dec there is 1 dc on one side of A.2 and 2 dc on the other side of A.2 (A.2 is over the middle 71-71-81-81-91-91 sts).
Continue A.2 back and forth with 1 and 2 dc in each side until sleeve measures approx. 39-39-38-38-37-37 cm / 15 ¼”-15 ¼”-15”-15”-14½”-14½” from marker (NOTE: Shorter measurements in the larger sizes because of wider shoulder and longer sleeve cap). Approx. 5 cm / 2'' remain until finished measurements, try the jacket on for correct sleeve length.
Then work dc back and forth over all sts – NOTE: Over sts in A.2 there should be 53-53-61-61-67-67 dc = 56-56-64-64-70-70 dc on row. When edge with dc measures 5 cm / 2'' and sleeve measures approx. 44-44-43-43-42-42 cm / 17¼”-17¼”-17”-17”-16½”-16½” from armhole, cut the yarn.
Sew sleeve seams tog edge to edge in outer loops of edge sts. Sew the openings under the sleeves. Sew on buttons (button between dc on band).
ELEVATION IN BACK OF NECK:
To make the neckline higher in the back of neck work an elevation as follows: Insert 1 marker in st in each corner in neckline, i.e. at beg of every raglan line. Work on hook size 3.5 mm as follows: Beg in 1st st from mid front at the edge of band and work 1 sc in every sc around the neck until 10 sc remain on row, but work 1 st before every marker as follows: 1 hdc in next st, 1 dc in next st (move marker to this st) and 1 hdc in next st.
Turn, work 1 sc in every st until 10 sts remain in the other side, but over the 3 sts in every corner (i.e. st with marker + 1 st on each side of this), work 3 sc tog – READ DECREASE TIP 2. Turn and work until 18 sc remain on row, turn and work until 18 sc remain on row in the other side. Continue back and forth like this with sc and dec in every corner until edge measures approx. 2 cm / 3/4'' at the widest mid back, then work 1 row over all sts with 1 sc in every sc. Fasten off.
Do you need some help?
For further pattern help, please contact the store where you bought the yarn. Having bought DROPS yarn, you are guaranteed to receive qualified help from a store specializing in the DROPS patterns.
All patterns are carefully reviewed, but we must make reservation for possible mistakes. All patterns are translated from Norwegian and you can always check the original pattern for measurements and calculations.
Go to original pattern for design DROPS 149-19. If you think you have found an error in the pattern, please post your remark or question in our Comments section.