Németh Mihályné wrote:
Bolero elejét hogyan kell kötni?-hiányzik a leírásból ! Az ábra és a modell fényképen látható kötés igy hogyan egyezhet? Kérem a kötés minta kiegészítését! Köszönöm
11.02.2024 - 23:12DROPS Design answered:
Kedves Németh Mihályné! Nem hiányzik a leírásból, mert a bolerót egy darabban kötjük, nincs külön eleje és háta. A megkötött darabot félbehajtva össze kell varrni (kérem figyelje meg az ábrát a mintaleírás alatt!).
14.02.2024 - 02:43Németh Mihályné wrote:
Bolero elejét hogyan kell kötni?-hiányzik a leírásból ! Az ábra és a modell fényképen látható kötés igy hogyan egyezhet? Kérem a kötés minta kiegészítését! Köszönöm
11.02.2024 - 23:09DROPS Design answered:
Kedves Németh Mihályné! A bolerónak NEM kötünk KÜLÖN elejét és hátát, hanem egy darabban kötjük, majd félbehajtjuk, és összevarrjuk, a varrás helyét a fotón a kislány karja előtt láthatja. Így alakul ki a boleró végleges formája. Sikeres kézimunkázást.
14.02.2024 - 02:41Stephanie Gauf wrote:
Bonjour , je débute dans le tricot c'est ma 2ème création. Est ce que je pourrais avoir des photos de votre travail pour me faire comprendre ce que je suis entrain de faire car la j'avoue que je suis perdu. J'ai pris la taille 7 8 ans et je suis déjà a 20 cm de hauteur depuis le milieu. Jai peur d'avoir fait une erreur.
01.04.2020 - 15:04DROPS Design answered:
Bonjour Mme Gauf, votre ouvrage doit se présenter approximativement comme dans la fig. 2 avec la flèche dans le sens du tricot: les côtés A/B et a/b sont plus long et le milieu (zig-zag) est plus court en hauteur à cause des rangs raccourcis. Vous pouvez montrer la photo de votre ouvrage à votre magasin (en l'envoyant par mail) pour qu'ils vérifient avec vous - vous pouvez également essayer de demander de l'aide à d'autres tricoteuses expérimentées sur le groupe DROPS Workshop. Bon tricot!
01.04.2020 - 15:38Ria wrote:
I have made this bolero & looks the same as fig 2. sewn a to A & b to B by the correct cm but it does not look like fig. 3 does not have curved front. What am I doing wrong please.
11.05.2018 - 17:47DROPS Design answered:
Dear Ria, after you have sew A to a B to b tog, rotate piece so that the ridges are vertically on back piece to get the same as fig. 3. (= holes are for armholes). Happy knitting!
22.05.2018 - 10:33Monique Vercammen wrote:
Gezien kleindochter gevoelig is voor wol, zou ik deze in acryl willen breien, welke zou u mij aanraden aub
15.06.2016 - 20:08DROPS Design answered:
Hoi Monique. Wij verkopen geen acrylgarens. Je kan vervangen door 1 draad 100% katoen: DROPS Paris. Wil je toch acryl moet je contact opnemen met je winkel voor een ander alternatief. Veel plezier.
16.06.2016 - 14:17Wendy wrote:
I have completed the knitting and can't figure out where the armholes come from and how to sew the seams? I am very frustrated with this pattern .
02.10.2015 - 01:57DROPS Design answered:
Dear Wendy, see fig. 2: armholes are a+A and b+B - sew 6-7-8 cm (see size) starting from outside towards inside - when piece is sewn tog, you will have fig.3. Happy knitting!
02.10.2015 - 09:07Marleen wrote:
Waarschijnlijk lees ik iets niet goed maar ik begrijp niet hoe vaak je de verkorte toeren moet breien. Daarnaast snap ik niet hoe je aan het eind in een keer af moet kanten. Hier moet toch ook een ronding komen. Help, wat doe ik verkeerd? Alvast bedankt voor de uitleg.
12.04.2015 - 15:40DROPS Design answered:
Hoi Marleen. Je breit de hele tijd de verkorte toeren vanaf het begin tot de vereiste afmetingen. Door de verkorte toeren wordt het werk breder aan de zijkanten komt automatisch de ronding beneden en boven. Je kant dus gewoon alle st af zoals beschreven.
13.04.2015 - 14:39Saroj wrote:
I was making this shrug with size 7-8. According to the fig 2 it seems it's done in one piece, and then folded in the middle. Is 41 cm is the beginning length then how do I end up with 52 cm at the bottom ie fig 1. Is the curved part the arm hole. This is the first time I am making a shrug, that is why I am having difficulty in understanding it. According to fig 2 there are two curve sides. How do I get this if knitted in one piece. Thanks for your help.
29.03.2015 - 04:05DROPS Design answered:
Dear Mrs Saroj, you will work short rows, ie as shown in Fig.2 with knitting direction, you work more rows in each side than in the middle. The 41 cm is measured in the middle of the piece when worked (zigzag in Fig.2) and 52 cm is the length along each side A/B and a/b where you have worked more rows. Happy knitting!
30.03.2015 - 15:34Delphine wrote:
Il n'y a aucune précision quant au nombre de mailles à rabattre à 37 cm puis à 46 cm afin de terminer la réalisation du boléro ? J'arrive presque à cette étape et je ne sais que faire car rien n'est mentionné. Merci pour votre réponse.
26.02.2015 - 19:01DROPS Design answered:
Bonjour Delphine, le nombre de mailles est le même que celui que vous avez monté (soit 54 m dans la 1ère taille), on tricote des rangs raccourcis, et on rabat les mailles quand l'ouvrage mesure au milieu de l'ouvrage et environ 46 cm sur le côté - voir fig.1 (ouvrage plié en double) et fig.2 (37 cm = le long de la ligne zig-zag). Bon tricot!
27.02.2015 - 09:17
Spring Shrug |
||||||||||||||||||||||
|
|
|||||||||||||||||||||
Knitted shrug in garter st, with crochet edge in DROPS Alpaca and DROPS Vivaldi. Size children 5 to 14 years.
DROPS Children 15-5 |
||||||||||||||||||||||
Knitting tension: 15 sts x 30 rows on needle size 6 mm with 1 thread of each quality in garter sts = 10 x 10 cm. Knitting tips: When turning in the middle of the work, - slip the first st , tighten the thread and knit back. This is done to avoid a hole in the transition. Turns: - Read knitting tips. *Knit 2 rows back and forth over all sts. Knit 18-19-20-21-22 sts, turn, knit back over these sts. Knit over all sts, turn, knit 18-19-20-21-22 sts, turn, knit back over these sts. Turn, knit 5 rows back and forth over all sts*. Repeat from *-* SHRUG Knit the shrug sideways, i.e. beg. at the side, knit the back and cast off at the other side. Knit the piece in garter sts (i.e. knit on all rows until finished). Cast on 54-57-60-63-66 sts on needle size 6 mm with 1 thread of each quality. Knit with turns – see explanation above. When the piece measures 37-41-47-52-57 cm (measured from the middle of the row) and approx. 46-52-59-65-72 cm (measured from the side), cast off loosely. Assembly: Bend A towards a and B towards b – see fig. 2. Sew 6-6-7-7-8 cm tog. at the edge each side (=12-13-13-14-14 cm for arm holes). Crochet edge: Crochet an edge around the shrug with 1 thread of each quality on hook size 5 mm as follows: 1 dc in the first garter st, 4 ch, skip 4 rows of garter sts, 1 dc in the next garter st, repeat from *-* and finish with 1 sl st at the beg. of round. |
||||||||||||||||||||||
Diagram explanations |
||||||||||||||||||||||
|
||||||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Marleen wrote:
Oke, dank je wel. Nu gaat het vast lukken.
14.04.2015 - 21:21