DROPS Muskat
DROPS Muskat
100% Cotton
from 1.30 £ /50g
Get the yarn to make this pattern from 13.00£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 90-23
Sizes: S/M (L/XL)
Circumference at top: approx. 63 (68) cm
Circumference at bottom: approx. 120 (131) cm
Length: approx. 35 (38) cm

Materials: DROPS Muskat from Garnstudio
100 (100) g colour no 05, powder pink
100 (100) g colour no 08, off white
100 (100) g colour no 09, light brown
100 (100) g colour no 10, peach
50 (50) g colour no 23, beige
50 (50) g colour no 61, light beige

DROPS Crochet hook size 4.5 mm.
------------------------------------------------------------

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Muskat
DROPS Muskat
100% Cotton
from 1.30 £ /50g
Get the yarn to make this pattern from 13.00£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
Crochet tension: Remember hook size is only a guide.
11 treble crochets/double treble crochets in width and approx. 7 rows in height = 10 x 10 cm.

Pattern: See Diag.1 - start at bottom of diagram.
Stripes: See M.2 - start at bottom of diagram in correct size. 1 row of M.2 = 1 row in Diag.1.

Crochet tip: Work between treble crochets/double treble crochets from previous round not in the stitches.
Crochet info: At beginning of each round replace 1 treble crochet with 3 chain stitches and 1 double treble crochet with 4 chain stitches. Each round finishes with 1 slip stitch in the 3rd or 4th chain stitch at beginning of round.
---------------------------------------------------------------

Poncho: The poncho is worked in the round from the neck down - Read Crochet tip and Crochet info; description of double treble crochet and half treble crochet - see page 2 (Crochet school).
Work 138 (150) chain stitches with hook size 4.5 mm and off white and form them into a ring with 1 slip stitch.
Round 1: 3 chain stitches (= 1 treble crochet), * skip 1 chain stitch, 1 treble crochet in next chain stitch *, repeat from *-* and finish with 1 slip stitch in 3rd chain stitch at beginning of round = 69 (75) treble crochets on round.
Read the whole of the next section before continuing! Now work Pattern according to Diag.1 at the same time as you work Stripes according to M.2.
Increases: At the same time, on round 1 in Diag.1 increase by working 2 double treble crochets between every 3rd treble crochet to end of round = 92 (100) double treble crochets. Rounds 2 and 4 are worked without increases. On round 3 in Diag.1 increase by working 2 double treble crochets between every 4th double treble crochet to end of round, but 2 (1) times on the round increase 1 extra double treble crochet = 117 (126) double treble crochets. On round 5 in Diag.1 increase by working 2 treble crochets between every 9th double treble crochet on the round but 2 (4) times, evenly spaced on round, increase 1 extra treble crochet = 132 (144) treble crochets. Remember the crochet tension!
The increases are now finished. Continue with Stripes and Pattern. When you have 6 (7) rows left in M.2 divide the piece for the split in each side = 66 (72) treble crochets in each side and continue working back and forth. When M.2 has been completed 1 time in height, piece measures approx. 33 (36) cm (or to desired length), cut the strand.

Work a finishing lace edge along both sides with light beige as follows:
Row 1: * 4 chain stitches, skip 2 treble crochets, 1 double crochet in next treble crochet *, repeat from *-* = 22 (24) chain-spaces in each side.
Row 2: 1 chain stitch, then work as follows in each chain-space: 1 double crochet, 1 chain stitch, 1 half treble crochet, 1 treble crochet, 1 double treble crochet, 1 treble crochet, 1 half treble crochet, 1 chain stitch and 1 double crochet.
Lace rows: Work 3 rounds of lace edges on the outside of the poncho as follows:
Start at top between the off white and powder-pink stripes, fold the piece wrong side to wrong side in the transition between the 2 colours and work with light beige as follows: 1 double crochet around first double treble crochet, * 4 chain stitches, skip 1 double treble crochet, 1 double crochet around next double treble crochet *, repeat from *-* to end of round and finish with 4 chain stitches and 1 slip stitch in first chain stitch at beginning of round.
The next lace row is worked in the same way with light brown between the peach and light stripes. The last lace row is worked with peach between the beige and brown stripes.

Diagram

symbols = off white
symbols = powder pink
symbols = peach
symbols = light beige
symbols = beige
symbols = light brown
symbols = 1 treble crochet
symbols = 1 double treble crochet
symbols = 1 chain stitch
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 90-23

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (7)

country flag NZK wrote:

Bonjour êtes vous sur qu'il ne manque pas un rang pour la réalisation des volant, des ml et ms ne font pas le résultats que l'on vois sur la photo! Merci

14.11.2023 - 09:40

DROPS Design answered:

Bonjour NZK, veillez à ce que vos mailles en l'air (celles des volants) ne soient pas trop serrées et de la même largeur qu'une double-bride / qu'une maille serrée, ajoutez-en si besoin pour avoir des volants un peu plus froncés. Bon crochet!

14.11.2023 - 10:50

country flag Marianne Sørensen wrote:

Vedr. 90-23 poncho: I diagrammet med st og dbl-st, er der luftmasker imellem maskerne ? Foreksempel 1 dbl-st, 1 lm hele omgangen, eller er det dbl-st alene hele omgangen rundt? Det er svært at se på diagrammet. Hilsen Marianne

18.05.2023 - 07:10

DROPS Design answered:

Hej Marianne, på de første 6 rækker er det kun st og dbl-st, men på 7.række har du 2 lm imellem hver st :)

23.05.2023 - 09:26

country flag Laura Balzarotti wrote:

Buona sera. Sono alla riga uno M1 di aumenti . Nel primo giro taglia s m mi trovo con 69 m.a. ora se la sequenza è tra le prime due m.a. fare una m.a.d. e tra le seguenti due m.a. fare due m.a.d. non arrivo a 92 m.a.d. ma a 101..ho capito male? Grazie!!

15.05.2016 - 21:12

DROPS Design answered:

Buonasera Laura. Il giro con aumenti viene lavorato così: 1 m.a.d tra le 2 m successive, 1 m.a.d tra le 2 m successive, 2 m.a.d tra le 2 m successive. Ripete questa sequenza su tutto il giro. Alla fine del giro, le m.a.d sono 92. Buon lavoro!

15.05.2016 - 21:29

country flag Laura wrote:

Buon giorno Solo x capire. Il diagramma M1 che viene citato e quello nel.disegno con Diag? E gli.aumenti non sono riportati nello schema giusto? Quindi devo seguire quanto scritto nella spiegazione del.modello? Grazie Saluti laura

13.05.2016 - 14:14

DROPS Design answered:

Buongiorno Laura, è esatto, il diag. è M.1 e il disegno a strisce è il diagramma M.2. Buon lavoro!

13.05.2016 - 15:02

Aurora Ballesteros wrote:

Hola! Envían el material a México? Todo el kit con el material necesario para hacer este patrón, vivo en México y me gustaría hacerlo igual al de la foto. Gracias

29.05.2015 - 02:28

DROPS Design answered:

Hola Aurora, en el apartado TIENDAS DROPS, dentro de INICIO, tienes un apartado RESTO DEL MUNDO donde aparecen 3 tiendas que envían a todo el mundo. Puedes entrar y elegir los productos que necesites.

07.06.2015 - 10:28

country flag Lauren McRoberts wrote:

Thank you! Just to clarify, the pattern uses "tc" a lot in the section "Inc:" and "Poncho." Each "tc" should be "dc?" It does also use some "dc", but I don't see any "tr," yet on the diagram, there are "tr." Please let me know. I look forward to the edit. Thank you! This is a beautiful pattern and I can't wait to make it!

20.02.2014 - 14:48

country flag Lauren McRoberts wrote:

Where the pattern starts with Inc: What is the "tc?" It is not referenced on the diagram either. Should this be "dc" or "tr?"

19.02.2014 - 19:20

DROPS Design answered:

Dear Mrs McRoberts, there is a typo, it should be 11 dc/tr (US-English) in width x 7 rows = 10 x 10 cm. Pattern will be edited. Happy knitting!

19.02.2014 - 21:13