DROPS Muskat
DROPS Muskat
100% Cotton
from 1.30 £ /50g
DROPS Cotton Viscose
DROPS Cotton Viscose
54% Cotton, 46% Viscose
Discontinued
find alternatives
DROPS Super Sale
DROPS 82-17
DROPS design: Pattern no R-439
--------------------------------------------------------

Sizes: S - M - L - XL - XXL
Material: DROPS Muskat from Garnstudio
100-100-150-150-150 g colour no 12, red
100-100-100-100-100 g colour no 21, rust
100-100-100-100-100 g colour no 40, coral
100-100-100-100-100 g colour no 41, bordeaux
100-100-100-100-100 g colour no 49, dark orange
50 - 50 - 50 - 50 - 50 g colour no 28, terracotta
and use: DROPS Cotton Viscose from Garnstudio
300-300-350-400-400 g colour no 06, rust

DROPS Crochet needle size 6 mm.
---------------------------------------------------------

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Muskat
DROPS Muskat
100% Cotton
from 1.30 £ /50g
DROPS Cotton Viscose
DROPS Cotton Viscose
54% Cotton, 46% Viscose
Discontinued
find alternatives

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
Crochet tension: Remember hook size is only a guide!
10 double treble crochet x 4.5 rows with hook size 6 mm and 1 strand Muskat + 1 strand Viscose = 10 x 10 cm.

Crochet info-1: At the beginning of every round/row, replace 1 double treble crochet with 4 chain stitches and every round is finished with 1 slip stitch in the 4th chain stitch/first double treble crochet at the beginning of the round.
Work 1 double treble crochet in each double treble crochet from the previous row - do not work between treble crochets.

Crochet info-2: Because the body and sleeves are first worked in the round and then back and forth on needle, there will be a slight difference in texture.

Stripes: Work 2 rounds of double treble crochets in each colour combination.
M = Muskat, CV = Cotton Viscose

Stripe pattern for body:
Bordeaux M no 41+ CV.
Coral M no 40 + CV.
Red M no 12 + CV.
Rust M no 21 + CV.
Dark orange M no 49 + CV.
Coral M no 40 + CV.
Red M no 12 + CV.
Piece now measures approx. 31 cm.
Repeat stripes to finished length.

Stripe pattern for sleeves:
Bordeaux M no 41 + CV.
Rust M no 21 + CV.
Dark orange M no 49 + CV.
Terracotta M no 28 + CV.
Rust M no 21 + CV.
Bordeaux M no 41 + CV.
Red M no 12 + CV.
Coral M no 40 + CV.
Dark orange M no 49 + CV.
Rust M no 21 + CV.
Piece now measures approx. 45 cm. Finish working sleeve with red M no 12 + CV.

Decrease tip: Decrease as follows at beginning of row:
Replace 1 double treble crochet with 1 slip stitch.
Decrease as follows at end of row: Turn piece when you have the number of double treble crochets left to be decreased.
----------------------------------------------------------

Body: Read Crochet info-1!
Work 120-132-144-159-174 chain stitches with hook size 6 mm and 1 strand bordeaux M + 1 strand CV and form them to a ring with 1 slip stitch in first chain stitch.
Work according to stripe pattern for body - see description above.
Round 1: Work 1 double treble crochet in each chain stitch but skip every 3rd chain stitch to end of round = 80-88-96-106-116 double treble crochets on round. Insert 1 marker thread in each side = 40-44-48-53-58 double treble crochets between the marker threads - allow the marker threads to follow your work upwards. Then work in the round with 1 double treble crochet in each double treble crochet - see Crochet info-1. Remember the crochet tension! When piece measures 15 and 25 cm increase 1 double treble crochet on each side of the marker thread in each side - increase 1 double treble crochet by working 2 double treble crochets in 1 double treble crochet = 88-96-104-114-124 double treble crochets on round. When piece measures 33-34-35-36-37 cm work the next round as follows: 1 slip stitch in each of the first 4 double treble crochets, 38-42-46-51-56 double treble crochets, turn piece and work back. Each piece is finished separately - read Crochet info-2.

Front piece: = 38-42-46-51-56 double treble crochets. Continue by decreasing for armholes in each side on each row - see Decrease tip: 2 double treble crochets 0-0-1-2-3 times and 1 double treble crochet 1-2-2-2-2 times = 36-38-38-39-40 double treble crochets. When piece measures approx. 43-45-47-49-51 cm (adjust so that you have 2 whole stripes left = 4 rows before finished length) decrease for neck as follows: Work 11-12-12-12-12 double treble crochets, turn piece and work back. Then decrease towards neck every row - see Decrease tip: 1 double treble crochet 3 times = 8-9-9-9-9 double treble crochets left on shoulder. Cut strand when piece measures 52-54-56-58-60 cm. Repeat on the other side.

Back piece: Work 1 slip stitch in each of the first 4 double treble crochets after the marker thread, 38-42-46-51-56 double treble crochets, turn piece and work back (= 6 double treble crochet opening in each side). Then decrease for armholes as for front piece = 36-38-38-39-40 double treble crochets. When piece measures 50-52-54-56-58 cm (you have 1 row left) work 1 row over just 8-9-9-9-9 double treble crochets in each side (do not work over the middle 20-20-20-21-22 double treble crochets = neck). Cut strand, piece measures approx. 52-54-56-58-60 cm.

Sleeve: Read Crochet info-1!
Work 42-45-45-48-51 chain stitches with hook size 6 mm and 1 strand bordeaux M + 1 strand CV and form them to a ring with 1 slip stitch. Work according to stripe pattern for sleeves - see description above.
Round 1: Work 1 double treble crochet in each chain stitch but skip every 3rd chain stitch to end of round = 28-30-30-32-34 double treble crochets on round. Insert 1 marker thread at beginning of round and allow the marker thread to follow your work upwards. Continue in the round with 1 double treble crochet in each double treble crochet. When piece measures 20 cm increase 1 double treble crochet on each side of the marker thread mid under sleeve approx. every 8-8-5-4-4 cm a total of 4-4-5-6-6 times - increase 1 double treble crochet by working 2 double treble crochets in 1 double treble crochet = 36-38-40-44-46 double treble crochets. When sleeve measures 48-47-45-44-42 cm work the next round as follows: 1 slip stitch in each of the first 4 double treble crochets, 30-32-34-38-40 double treble crochets, turn piece and work back. The sleeve is finished working back and forth - see Crochet info-2. Then decrease for sleeve cap on each row - see Decrease tip: 2 double treble crochets in each side until piece measures 56 cm.

Assembly: Sew shoulder seams edge to edge.

Neck: Work 1 row of double treble crochets around the neck with hook size 6 mm and 1 strand red M no 12 + 1 strand CV.
Sew in sleeves edge to edge so the seam is not thick.

Diagram

diagram measurements
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 82-17

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (10)

country flag Bertrie wrote:

Het garen cotton viscose is uit het assortiment zag ik. Welk garen kan ik als alternatief gebruiken?

16.02.2024 - 14:43

DROPS Design answered:

Dag Bertie,

Cotton Viscose valt in garencategorie A, dus je zou een katoengaren uit die categorie kunnen kiezen, bijvoorbeeld DROPS Safran, alleen heb je danniet het glanseffect.

18.02.2024 - 08:47

country flag Sara wrote:

Hvordan feller man til ermene? Det står at man skal felle 2 dbl-st 0-0-1-2-3 ganger og 1 dbl-st 1-2-2-2-2 ganger = 36-38-38-39-40 dbl-st. Betyr det at man skal la være å felle 2 rader, men felle 2 dbl-stv den tredje raden? 4. rad: så skal det felles 2dbl-stv X 2 = dbl-stv? Kan dere forklare? Og skal den 1 dbl-stv egentlig være 1 stav? Så lenger oppi kommentarfeltet at dere svarte noe sånn, men skjønte ikke alt da det sto på nederlandsk.

06.03.2022 - 13:17

DROPS Design answered:

Hej Sara, du feller 1 dbl-st i hver side når arb måler 33 cm og du feller ifølge Felletipset. God fornøjelse!

09.03.2022 - 10:34

country flag Wendi Van Helden wrote:

Kunnen jullie wat meer uitleg geven bij de volgende beschrijving? Voorpand: = 38-42-46-51-56 dst. Kant vervolgens af voor de armsgaten aan de weerskanten in elke nld - zie Tips voor het afkanten: 2 dst x 0-0-1-2-3 en 1 st x 1-2-2-2-2 = 36-38-38-39-40 dst. Klopt het dat er st staat ipv dst. Als het dst is, hoe kan ik dan in mt S komen van 38 naar 36, terwijl ik er maar 1 minder?

02.05.2021 - 17:10

DROPS Design answered:

Dag Wendi,

Je kant aan beide kanten een dubbel stokje af, dus 2 dubbele stokjes in totaal = 36 steken. (p.s.: dst = dubbel stokje, stk = stokje, st = steek)

05.05.2021 - 14:14

country flag Christine wrote:

Hallo, ich habe mit dem Pulloverhäkeln begonnen und bin jetzt bei "Vorderteil" angelangt. Jetzt soll bei den Armlöchern abgekettet werden. Wie ist das gemeint mit 2D-Stb. 1 Mal und 1D-Stb. 2 Mal? Wie mache ich das? Ich danke für Ihre Hilfe. Gruß Christine

10.01.2020 - 11:52

DROPS Design answered:

Liebe Christine, diese Abnahmen sind unter "Tipp für das Abketten" erklärt, also am Anfang der Reihe, jedes D-Stb mit 1 Kettm ersetzen, am Ende der Reihe, wenden Sie wenn die Anzahl der D-Stb (die Sie abnehmen sollen) übrig bleibt. Viel Spaß beim häkeln!

10.01.2020 - 13:18

country flag Nadine wrote:

Hallo, ich arbeite gerade an diesem Pullover. Jetzt bin ich gerade bei 15cm angelangt und muss 1D-Stb. auf jeder Seite des Markierungsfadens aufnehmen. Ich habe jetzt 96 Maschen und soll nach der Zunahme auf 104 Maschen kommen. Wie geht das, da müsste ich doch 8 Maschen zunehmen? Oder wo liegt mein Denkfehler? Vielleicht können Sie mir helfen. Vielen Dank. Mit freundlichen Grüßen N. Schmiechen

16.08.2019 - 12:12

DROPS Design answered:

Liebe Nadine, es werden 2 Maschen auf beiden Seiten der beiden Markierungen zugenommen, also 4 D-Stb werden pro Reihe zugenommen d.h. insgesamt 8 Zunahmen: 96+8 = 104 M. Viel Spaß beim häkeln!

16.08.2019 - 12:40

country flag Michelle wrote:

Name suggestion sunrise Starburst.

31.05.2019 - 03:43

country flag Maple wrote:

Very nice article, totally what I wanted to find.

10.03.2018 - 03:44

Profissional De Seo wrote:

Esѕe trabalh᧐ é chamado de Otimіzação ɗe Internet sites.

27.12.2017 - 16:37

Portal Da Oportunidades Da Net wrote:

Espero que você tenha gostado desse artigo.

27.12.2017 - 15:38

Site Da Oportunidades Da Net wrote:

Dá trabalho? Um forte abraço e sucesso. Obrigada! Olá Jessé!

27.12.2017 - 02:05