Aimée wrote:
Hello, Can I use circular needles instead of straight ones for this pattern?
03.06.2023 kl. 14:31:DROPS Design answered:
Dear Aimée, here we use double pointed needles, not straight needles. You can use 2 sets of circular needles for this piece, using the method explained in this video: https://www.garnstudio.com/video.php?id=97&lang=en. You can also work with one circular needle and use the magic loop technique. Happy knitting!
04.06.2023 kl. 18:11:Sharon Hunt wrote:
Hei, is the short side referred to in the lace pattern the side that will be sewn on to the leg warmer. Thank for responding. Shaton
14.03.2023 kl. 23:49:DROPS Design answered:
Hi Sharon, Yes, the shorter side is the side which will be sewn to the leg warmer. Happy crafting!
15.03.2023 kl. 07:21:Sharon Junt wrote:
Hello, am now working the lace border for the leg warmer. The 4 row says to bind off 3 and knit 4. am I supposed to put the last stitch on the left needle after the bonus off stiches back on the right needle. Does this stitch count as the first stitch? Thanks for your response.
13.03.2023 kl. 22:54:DROPS Design answered:
Hi Sharon, You bind off 3 stitches and have 1 stitch left on the right needle, which stays there while you knit the remaining 3 stitches (this stitch is included in the 4 knitted stitches). Happy knitting!
14.03.2023 kl. 07:11:Sharon Hunt wrote:
How do I make sure there is a p2 in the middle of this 6 stitch cable? Thank you.
11.03.2023 kl. 13:28:DROPS Design answered:
Dear Sharon, you need to ensure that you will have k2,p2,k2 over the 6 stitches of the cable. Since you are working a k2,p2 rib, adjust as necessary to obtain the indicated combination over the cable (start the row with k2 or p2 accordingly). Happy knitting!
12.03.2023 kl. 17:05:Sharon Hunt wrote:
Hi. What am I missing where are the instruction to knit 2 purl 2? When I follow the instruction I end up with garter stitch. I have ripped 2 times already and I don’t know what am doing wrong. I don’t see anywhere in the pattern instruction where i says to knit 2 purl 2 for X number of inches before starting the cable. How many cables are in the pattern? I see the cables at the front only? Are there more?
09.03.2023 kl. 21:40:DROPS Design answered:
Dear Mrs Hunt, piece is worked bottom up, at the very beginning you start with garter stitch (and you will work and sew the lace edge afterwards), then work the pattern .There is only one cable in the pattern. And then you work in rib (= K2, P2) - the rib as explained under Rib: at the top of pattern explanations - until piece measures 15 3/4" from the cast on row. Happy knitting!
10.03.2023 kl. 09:48:Isa wrote:
Combien faut-il de pelotes pour ce modèle, je ne vois pas l'indication ?
05.10.2020 kl. 12:56:DROPS Design answered:
Bonjour Isa, vous trouverez la quantité indiquée sous l'en-tête, au poids, soit pour ce modèle300 g DROPS Eskimo /50 g la pelote = 6 pelotes. Bon tricot!
05.10.2020 kl. 15:33:Martinique wrote:
Please advise the pattern sais cast on then knit 3 rows and p3 rows etc then the next row the cable with the reverse stocking sts this I understand but then it sais When piece measures aprox 33 cm what rows am I repeating for my knitting to reach 34cm I am basically asking how many rows do I knit between cables? Secondly when I decrease 6 sts evenly where do I do this in the middle or where? Thank you
10.06.2020 kl. 15:06:DROPS Design answered:
Dear Martinique, you will continue working as established (from RS) = 1 edge st, P16, M.1, P16, 1 edge st, repeating the 16 rows in M.1 until piece measures 34 cm from cast on edge. Read more here about diagrams. You decrease 3 sts on each side of M.1 (= from RS, purl 2 together evenly distributed a total of 3 times before M.1 and after M.1). Happy knitting!
10.06.2020 kl. 15:18:Lilou wrote:
Bonjour, j'ai toujours du mal à trouver un modèle sur votre nouvelle présentation!! j'ai le numéro du modèle comment faire?... je passe donc systhèmatiquement par google avec le n0 du modèle pour trouver!!!...
18.12.2016 kl. 09:55:DROPS Design answered:
Bonjour Lilou, recherchez des modèles plus simplement dès la page d'accueil en indiquant le numéro du modèle dans la case indiquée dans la rubrique "Cherchez des modèles!" - voir aussi l'aide à la recherche ici. Bon tricot!
19.12.2016 kl. 10:04:Nayla Menassa wrote:
Bonjour je ne comprend pas le tout debut:tricoter 3rang à l'endroit et 3 autres rangs à l'envers? 1m lis çà ve dire quoi? Merci pour votre patience
19.02.2015 kl. 12:50:DROPS Design answered:
Bonjour Mme Menassa, on tricote d'abord toutes les mailles à l'endroit pendant 3 rangs (= 3 rangs endroit), puis on tricote toutes les mailles à l'envers pendant 3 rangs (= 3 rangs envers). Le 1er de ces 6 rangs se fait sur l'endroit de l'ouvrage. 1 m lis = la 1ère et la dernière maille du rang qui sert ensuite à l'assemblage. Bon tricot!
19.02.2015 kl. 14:29:Laelia wrote:
Je pense qu'il y a une erreur sur l'explication de la bordure dentelle, il est écris "a 36 cm de hauteur totale (mesuré sur la + petite longueur)", ce ne serai pas a 3.6 cm ?
10.01.2015 kl. 09:31:DROPS Design answered:
Bonjour Laelia, la bordure va ensuite être cousue tout autour de la jambière, elle doit bien mesurer 36 cm de hauteur totale du côté le plus court (= le tour du bas de la jambière). Bon tricot!
10.01.2015 kl. 17:40:Daniela wrote:
Wenn ich beim Zopf 2 M auf die Hilfsnadel legen soll und dann später 3 M von der Hilfsnadel stricken soll, wo hole ich denn die dritte Masche her?
25.12.2013 kl. 20:54:DROPS Design answered:
Liebe Daniela, Sie haben völlig Recht, es war ein Fehler im Diagrammtext. Wir haben es gleich korrigiert.
26.12.2013 kl. 10:46:Lorier wrote:
Merci pour votre réponse mais j ai un peut de mal à comprendre en faite j ai terminer la jambiere en faisait la dentelle et du coup je suis un peut perdu pour les jeté j ai bien comprie et après pas trop bien cordialement
13.11.2013 kl. 23:09:DROPS Design answered:
Bonjour Mme Lorier, La vidéo ci-dessous vous montre comment faire 2 jetés (au tout début). Puis, au rang suivant, (time code 0:14), vous tricotez le 1er jeté à l'end, et le 2ème jeté à l'envers (attention, dans la vidéo, il est tricoté à l'end). Bon tricot!
14.11.2013 kl. 08:51:Lorier wrote:
Bonjour Je suis en train de faire la bordure dentelle mais je ne comprend pas trop pour le le 2 rangs 2m end dans la 1ère m,2m end,1 m env. dans le 2 jeté ,2 m end merci pour votre aide bien cordialement
13.11.2013 kl. 19:03:DROPS Design answered:
Bonjour Mme Lorier, pour la bordure, faites 2 jetés au 1er rang, au 2ème rang, tricotez la 1ère m 2 fois à l'endroit: 1 fois dans le brin avant, 1 fois dans le brin arrière, puis tricotez 1 m end, le 1er jeté à l'end, le 2ème jeté à l'envers et terminez par 2 m end. Bon tricot!
13.11.2013 kl. 21:04:Kernen Guenaelle wrote:
Je ne comprend absolument pas comment faire la bordure dentelle des jambieres , le 2 rang correspon t il a l envers et a la fin du rang 4 il reste 5 m ?
19.10.2013 kl. 20:22:DROPS Design answered:
Bonjour Mme Kernen, Au rang 1, vous faites 2 jetés (au lieu d'1 seul, correction faite), au rang 4, vous avez 7 m, vous en rabattez 3, il en reste 4. Bon tricot!
21.10.2013 kl. 11:31:Jillie wrote:
Oh! hahaha. my orientation was wrong : )) . i just mentally switched it from landscape to portrait. oh for heaven's sake. now it works.
13.12.2012 kl. 01:16:Jillie wrote:
The lace border says to bind of 3, then knit 4. it doesn't say how to bind of the last 4 knit as there are multiples of these between the bindoffs . help ?
13.12.2012 kl. 00:27:DROPS Design answered:
Dear Jillie, on 3rd row you have 7 sts, at the beg of 4th row, bind of the first 3 sts and work the last 4 knitwise. You repeat row 1-4 until desired length. Happy knitting !
13.12.2012 kl. 10:22:Drops Design wrote:
Cast on 4 sts, on first row you inc to 6 sts, on 2nd row you inc to 7 sts, on 3rd row you work the 7 sts, and on 4th row you BO so that you are back to 4 sts again.
09.02.2010 kl. 18:14:Lina wrote:
Hello! Please help me to explain how to knit lace border. In firs row we have 6 sts and in second already 7sts?Please explain is it to knit 2sts together to the first st? Thank's
09.02.2010 kl. 09:58:Mireille wrote:
Bonjour, je cherche des modèles de guêtres, bonnet etc pour débutante. je tricote des choses simples pour l'instant. merci
11.01.2010 kl. 10:13:Maria Aparecida wrote:
Receita escrita em portuguese
24.06.2008 kl. 20:40:Catharina wrote:
Härliga till varm kappa och vinterkängor!
15.10.2006 kl. 16:35:Anne-Christine wrote:
Sånna vill jag ha i vinter
25.09.2006 kl. 18:55:dorthe wrote:
dejligt med nogle store benvamser!
15.09.2006 kl. 11:32:Elin wrote:
Dom här vill jag sticka, när kan man få tag på mönstret??
18.08.2006 kl. 18:41:wrote:
precioso
01.08.2006 kl. 17:46:Maria wrote:
De er også vældig, vældig søde.
27.07.2006 kl. 17:43:Anci wrote:
Måste med
18.07.2006 kl. 15:31:Lotta wrote:
Dom här tyckte jag om, ha gärna med dem i höstnumren!
17.07.2006 kl. 15:37:Stina wrote:
Tja, jeg tror måske helt jeg vil give benvarmere come back, hvis de her kommer med!
12.07.2006 kl. 22:05:Iréne wrote:
Inte för mig!!!
07.07.2006 kl. 12:24:allis wrote:
ikke fiks vil man ha lår i skoene så er løsningen her
04.07.2006 kl. 09:22:Gitte Norlander wrote:
Nej tak ikke til mig.
25.06.2006 kl. 16:36:Susan wrote:
Nej Tak
19.06.2006 kl. 09:57:Jenny wrote:
Dessa vill jag göra!
18.06.2006 kl. 23:12:IA wrote:
Nej. Ser ut som om man har moonboots på. Inte kul.
17.06.2006 kl. 11:57:T wrote:
Dom här var fruktansvärt snygga, vill verkligen ha dom i höst =)
16.06.2006 kl. 13:09:Ingrid wrote:
Ytterligare fula benvärmare. Det går å göra snygga ;-)
16.06.2006 kl. 11:44:ela wrote:
stygg, kjedelig og ikke sjarmerende for bena
13.06.2006 kl. 00:35:Johanna wrote:
Fina, skall sticak dom!
11.06.2006 kl. 22:02:Anne Dehn wrote:
Nej. Alt for dominerende.
11.06.2006 kl. 10:16:connie wrote:
nej
09.06.2006 kl. 23:05:Mel wrote:
This is wonderfull design.
08.06.2006 kl. 21:34:We would love to hear what you have to say about this pattern!
If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.
Your email address will not be published. Required fields are marked *.
Laelia wrote:
Ha non, j'ai compris mon erreur, désolée
10.01.2015 kl. 09:35: